[U-Boot] [PATCH v2 2/4] apalis/colibri_t30: fix MMC/SD card detect GPIOs
Marcel Ziswiler
marcel at ziswiler.com
Sun Mar 1 02:05:37 CET 2015
This fixes the MMC/SD card detect GPIOs for Apalis T30 which got broken
by the following commit:
2b2b50bc8748 "dm: tegra: dts: Use TEGRA_GPIO() macro for all GPIOs"
While at it also re-add the comments describing which particular
Apalis/Colibri pins those GPIOs are on.
Signed-off-by: Marcel Ziswiler <marcel at ziswiler.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
Acked-by: Stefan Agner <stefan.agner at toradex.com>
---
Changes in v2:
- Include commit subject too when referencing a previous commit as
suggested by Stephen
arch/arm/dts/tegra30-apalis.dts | 9 +++++++--
arch/arm/dts/tegra30-colibri.dts | 4 +++-
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/tegra30-apalis.dts b/arch/arm/dts/tegra30-apalis.dts
index 75c5d5f..13ab42b 100644
--- a/arch/arm/dts/tegra30-apalis.dts
+++ b/arch/arm/dts/tegra30-apalis.dts
@@ -247,13 +247,15 @@
sdhci at 78000000 {
status = "okay";
bus-width = <4>;
- cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+ /* SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
};
sdhci at 78000400 {
status = "okay";
bus-width = <8>;
- cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ /* MMC1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
};
sdhci at 78000600 {
@@ -266,12 +268,14 @@
usb at 7d000000 {
status = "okay";
dr_mode = "peripheral";
+ /* USBO1_EN */
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
};
/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
usb at 7d004000 {
status = "okay";
+ /* USBH_EN */
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
phy_type = "utmi";
};
@@ -279,6 +283,7 @@
/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
usb at 7d008000 {
status = "okay";
+ /* USBH_EN */
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts
index 6cd1902..36533dc 100644
--- a/arch/arm/dts/tegra30-colibri.dts
+++ b/arch/arm/dts/tegra30-colibri.dts
@@ -64,7 +64,7 @@
sdhci at 78000200 {
status = "okay";
bus-width = <4>;
- cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
};
sdhci at 78000600 {
@@ -83,12 +83,14 @@
usb at 7d004000 {
status = "okay";
phy_type = "utmi";
+ /* VBUS_LAN */
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
};
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
usb at 7d008000 {
status = "okay";
+ /* USBH_PEN */
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
};
};
--
1.9.3
More information about the U-Boot
mailing list