[U-Boot] [PATCH 2/2] mx35: Fix boot hang by avoiding vector relocation

[Stefano Babic]

Hi Fabio,

On 23/02/2015 13:09, Fabio Estevam wrote:
> Since commit 3ff46cc42b9d73d0 ("arm: relocate the exception vectors") mx35
> does not boot anymore.
> 
> Add a specific relocate_vectors macro that skips the vector relocation, as the
> i.MX35 SoC does not provide RAM at the high vectors address (0xFFFF0000), and
> (0x00000000) maps to ROM.
> 
> This allows mx35 to boot again.
> 
> Cc: Sebastian Priebe <sebastian.priebe at cadcon.de>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> Sebastian,
> 
> I don't have access to a mx35 board.
> 
> Could you please test this patch?
> 
> Thanks
> 

Thanks for the patch !

I have found again a mx35pdk and I could test your patch. 2015.04-rc1
is running on that.

Tested-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================