[U-Boot] [PATCH] mmc: sdhci: don't clobber adjacent registers
Pantelis Antoniou
panto at antoniou-consulting.com
Mon Mar 2 19:31:52 CET 2015
Hi Matt,
> On Feb 23, 2015, at 23:56 , Matt Reimer <mreimer at sdgsystems.com> wrote:
>
> SDHCI_HOST_CONTROL is a byte-sized register, so don't write to it
> as if it were a long, as that would result in clobbering the three
> registers following.
>
> Signed-off-by: Matt Reimer <mreimer at sdgsystems.com>
> ---
> drivers/mmc/sdhci.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> index 82d7984..1f8917b 100644
> --- a/drivers/mmc/sdhci.c
> +++ b/drivers/mmc/sdhci.c
> @@ -412,7 +412,7 @@ static int sdhci_init(struct mmc *mmc)
> if (host->quirks & SDHCI_QUIRK_NO_CD) {
> unsigned int status;
>
> - sdhci_writel(host, SDHCI_CTRL_CD_TEST_INS | SDHCI_CTRL_CD_TEST,
> + sdhci_writeb(host, SDHCI_CTRL_CD_TEST_INS | SDHCI_CTRL_CD_TEST,
> SDHCI_HOST_CONTROL);
>
> status = sdhci_readl(host, SDHCI_PRESENT_STATE);
> --
> 1.7.9.5
>
The patch is obviously correct and I’ll pick it up for my next pull-req.
Relax :)
Regards
— Pantelis
More information about the U-Boot
mailing list