[U-Boot] Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card

Gabriel Dobato dobatog at gmail.com
Wed Mar 4 09:18:07 CET 2015


HI Dmitry,

Thank you very much for your answer!

I have tried it, but I get the same:

CM-A510>> mmc init
CM-A510>> mmcinfo 0
Device: MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 0-bit

In reference to peripherals, only is available USB and Ethernet 0 by 
default. I am searching in the sources just in case there is something 
else... but I am afraid I will not find something.

>> #define CM_A510_MPP0_7                                 0x00000033
>> #define CM_A510_MPP8_15                                0x00445050
>> #define CM_A510_MPP16_23                               0x66664040


By the way, how do you get that resgisters? In my case, I tried to 
define them as per as Marvell 88AP510 Specification reference. Is it the 
right place?

Best regards,

Gabriel



On 04/03/15 07:37, Dmitry Lifshitz wrote:
> Hi Gabriel,
>
>
> Try fixing CM-A510 related code:
>
> mvBoardEnvSpec.h
>
> ...
> ...
>
> /* CM-A510 */
> #define CM_A510_MPP0_7                                 0x00000033
> #define CM_A510_MPP8_15                                0x00445050
> #define CM_A510_MPP16_23                               0x66664040
> #define CM_A510_MPP24_31                               0x11111111
> #define CM_A510_MPP32_39                               0x11111111
> #define CM_A510_MPP40_47                               0x11111111
> #define CM_A510_MPP48_55                               0x11111111
> #define CM_A510_MPP56_63                               0x00111111
>
> ...
>
>
> board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c
>
> ...
> ...
> MV_BOARD_MPP_INFO      cm_a510InfoBoardMppConfigValue[]
>
> ...
>
>
> Regards,
>
> Dmitry
>
>
> On 03/03/2015 05:55 PM, Gabriel Dobato wrote:
>> Hello,
>>
>> I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510
>> SoM(provided by Compulab) using the u-boot image provided by Compulab:
>>
>> http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres
>>
>> By default, it seems SD-Card is not enabled, so I think I have to
>> configure right the MPP option.
>>
>> I have searched over and over in the code sources, I have change some
>> arrays defined in some files that are related to the MPP (pinmux) but
>> nothing happens:
>>
>> ./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h:
>>
>> * DB-88F6781-BP B0 */
>> #define DB_88AP510BP_B_MPP0_7            0x00000000
>> #define DB_88AP510BP_B_MPP8_15            0x00442000
>> #define DB_88AP510BP_B_MPP16_23            0x32334043   <---
>> #define DB_88AP510BP_B_MPP24_31            0x11111111
>> #define DB_88AP510BP_B_MPP32_39            0x11111111
>> #define DB_88AP510BP_B_MPP40_47            0x11111111   <---
>> #define DB_88AP510BP_B_MPP48_55            0x11111111
>> #define DB_88AP510BP_B_MPP56_63            0x00111111
>> #define DB_88AP510BP_B_OE_LOW
>> (~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19)))
>>
>>
>> #define DB_88AP510BP_B_OE_HIGH            0x0FFFFFFF
>> #define DB_88AP510BP_B_OE_VAL_LOW
>> ((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19))
>>
>>
>> #define DB_88AP510BP_B_OE_VAL_HIGH        0x0
>>
>>
>>
>>
>> ./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c:
>> MV_BOARD_MPP_INFO    db88f6781bpbInfoBoardMppConfigValue[] =
>>      {{{{
>>      DB_88AP510BP_B_MPP0_7,
>>      DB_88AP510BP_B_MPP8_15,
>>      DB_88AP510BP_B_MPP16_23,
>>      DB_88AP510BP_B_MPP40_47        <-------
>>      }}}};
>>
>> Anyone has faced this problem before? I really appreciate some kind of
>> help.
>>
>> Best regards,
>>
>> Gabriel
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
>>
>


More information about the U-Boot mailing list