[U-Boot] "Error: selected processor does not support `bx lr'" when compiling u-boot-2015.01 with SCB9328 config, 2014.01 works
Markus Rudolf
markus.rudolf at mpic.de
Wed Mar 4 09:09:07 CET 2015
I tried the following:
armdev at armdev-vm:~/Development/u-boot-2015.01$ export ARCH=arm
armdev at armdev-vm:~/Development/u-boot-2015.01$ export
CROSS_COMPILE=/opt/OSELAS.Toolchain-trunk/arm-v4t-linux-gnueabi/gcc-4.1.2-glibc-2.5-binutils-2.17-kernel-2.6.18/bin/arm-v4t-linux-gnueabi-
armdev at armdev-vm:~/Development/u-boot-2015.01$ make distclean
CLEAN tools
CLEAN tools/lib tools/common
CLEAN scripts/basic
CLEAN scripts/kconfig
CLEAN include/config include/generated
CLEAN .config include/autoconf.mk include/autoconf.mk.dep
include/config.h
armdev at armdev-vm:~/Development/u-boot-2015.01$ make scb9328_defconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
#
# configuration written to .config
#
armdev at armdev-vm:~/Development/u-boot-2015.01$ make all
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config.h
UPD include/config.h
GEN include/autoconf.mk
GEN include/autoconf.mk.dep
CHK include/config/uboot.release
UPD include/config/uboot.release
CHK include/generated/version_autogenerated.h
UPD include/generated/version_autogenerated.h
CHK include/generated/timestamp_autogenerated.h
UPD include/generated/timestamp_autogenerated.h
CC lib/asm-offsets.s
GEN include/generated/generic-asm-offsets.h
CC arch/arm/lib/asm-offsets.s
GEN include/generated/asm-offsets.h
HOSTCC tools/envcrc.o
WRAP tools/lib/crc32.c
HOSTCC tools/lib/crc32.o
WRAP tools/common/env_embedded.c
HOSTCC tools/common/env_embedded.o
WRAP tools/lib/sha1.c
HOSTCC tools/lib/sha1.o
HOSTLD tools/envcrc
HOSTCC tools/gen_eth_addr
HOSTCC tools/mkenvimage.o
HOSTCC tools/os_support.o
HOSTLD tools/mkenvimage
HOSTCC tools/aisimage.o
HOSTCC tools/atmelimage.o
WRAP tools/common/bootm.c
HOSTCC tools/common/bootm.o
HOSTCC tools/default_image.o
WRAP tools/lib/fdtdec_common.c
HOSTCC tools/lib/fdtdec_common.o
WRAP tools/lib/fdtdec.c
HOSTCC tools/lib/fdtdec.o
HOSTCC tools/fit_common.o
HOSTCC tools/fit_image.o
HOSTCC tools/gpimage.o
HOSTCC tools/gpimage-common.o
WRAP tools/common/image-fit.c
HOSTCC tools/common/image-fit.o
HOSTCC tools/image-host.o
WRAP tools/common/image.c
HOSTCC tools/common/image.o
HOSTCC tools/imagetool.o
HOSTCC tools/imximage.o
HOSTCC tools/kwbimage.o
WRAP tools/lib/md5.c
HOSTCC tools/lib/md5.o
HOSTCC tools/mxsimage.o
HOSTCC tools/omapimage.o
HOSTCC tools/pblimage.o
HOSTCC tools/pbl_crc32.o
HOSTCC tools/socfpgaimage.o
WRAP tools/lib/sha256.c
HOSTCC tools/lib/sha256.o
HOSTCC tools/ublimage.o
WRAP tools/lib/libfdt/fdt.c
HOSTCC tools/lib/libfdt/fdt.o
WRAP tools/lib/libfdt/fdt_ro.c
HOSTCC tools/lib/libfdt/fdt_ro.o
WRAP tools/lib/libfdt/fdt_rw.c
HOSTCC tools/lib/libfdt/fdt_rw.o
WRAP tools/lib/libfdt/fdt_strerror.c
HOSTCC tools/lib/libfdt/fdt_strerror.o
WRAP tools/lib/libfdt/fdt_wip.c
HOSTCC tools/lib/libfdt/fdt_wip.o
HOSTCC tools/dumpimage.o
HOSTLD tools/dumpimage
HOSTCC tools/mkimage.o
HOSTLD tools/mkimage
HOSTCC tools/proftool
LD arch/arm/cpu/built-in.o
CC arch/arm/cpu/arm920t/cpu.o
CC arch/arm/cpu/arm920t/imx/generic.o
CC arch/arm/cpu/arm920t/imx/speed.o
CC arch/arm/cpu/arm920t/imx/timer.o
LD arch/arm/cpu/arm920t/imx/built-in.o
LD arch/arm/cpu/arm920t/built-in.o
AS arch/arm/cpu/arm920t/start.o
AS arch/arm/lib/vectors.o
AS arch/arm/lib/crt0.o
AS arch/arm/lib/relocate.o
arch/arm/lib/relocate.S: Assembler messages:
arch/arm/lib/relocate.S:50: Error: selected processor does not support
`bx lr'
make[1]: *** [arch/arm/lib/relocate.o] Error 1
make: *** [arch/arm/lib] Error 2
armdev at armdev-vm:~/Development/u-boot-2015.01$
I tried the same steps with export arch=armv4 and armv4t as well which
didn't make any difference.
Can someone point me into the right direction? I would prefer stay with
this toolchain, because I need to support a fairly old LINUX and
userland with it and just wanna update the u-boot on my SCB9328 to get
rid of some issues with newer JFFS2 flags not supported by my current
1.12 uboot on the board.
I just tested: uboot 2014.01 compiles with the same settings and
toolchain. So I guess it broke somewhere in between. I can try to
pinpoint it if it helps.
Markus
More information about the U-Boot
mailing list