[U-Boot] [PATCH] x86: Add queensbay fsp patch information in README.x86

[Bin Meng]

The FSP release version 001 for Intel Queensbay has a bug which
could cause random endless loop during the FspInit call. This bug
was published by Intel although Intel did not describe any details.
Describe this information in the x86 doc so that U-Boot Queensbay
support is invulnerable.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---

 doc/README.x86 | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/doc/README.x86 b/doc/README.x86
index fb87682..0355d1c 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -105,6 +105,13 @@ in this FSP package too.
 Rename the first one to fsp.bin and second one to cmc.bin and put them in the
 board directory.
 
+Note the FSP release version 001 has a bug which could cause random endless
+loop during the FspInit call. This bug was published by Intel although Intel
+did not describe any details. We need manually apply the patch to the FSP
+binary using any hex editor (eg: bvi). Go to the offset 0x1fcd8 of the FSP
+binary, change the following five bytes values from orginally E8 42 FF FF FF
+to B8 00 80 0B 00.
+
 Now you can build U-Boot and obtain u-boot.rom
 
 $ make crownbay_defconfig
-- 
1.8.2.1