[U-Boot] [PATCH] powerpc: 85xx: Modify CONFIG_USB_MAX_CONTROLLER_COUNT for P1022DS

[York Sun]

On 01/29/2015 10:52 PM, ying.zhang at freescale.com wrote:
> From: Ying Zhang <b40530 at freescale.com>
> 
> Modify CONFIG_USB_MAX_CONTROLLER_COUNT value to 1 on P1022DS.
> As ETSEC2 and USB2 are muxed; thus if ETSEC2 is enabled, the
> system bus hangs on USB2 if ETSEC2 is enabled but "usb start"
> command is issued. Hence making default controller count to 1
> to avoid system hang.
> 
> Signed-off-by: Nikhil Badola <nikhil.badola at freescale.com>
> Reviewed-by: Yusong Sun <yorksun at freescale.com>
> ---


Applied to u-boot-mpc85xx master, awaiting for upstream.

York