[U-Boot] [PATCH 3/4][v3] SECURE BOOT: Add command for validation of images
York Sun
yorksun at freescale.com
Thu Mar 5 21:15:59 CET 2015
On 02/26/2015 08:15 PM, Gaurav Rana wrote:
> 1. esbc_validate command is meant for validating header and
> signature of images (Boot Script and ESBC uboot client).
> SHA-256 and RSA operations are performed using SEC block in HW.
> This command works on both PBL based and Non PBL based Freescale
> platforms.
> Command usage:
> esbc_validate img_hdr_addr [pub_key_hash]
> 2. ESBC uboot client can be linux. Additionally, rootfs and device
> tree blob can also be signed.
> 3. In the event of header or signature failure in validation,
> ITS and ITF bits determine further course of action.
> 4. In case of soft failure, appropriate error is dumped on console.
> 5. In case of hard failure, SoC is issued RESET REQUEST after
> dumping error on the console.
> 6. KEY REVOCATION Feature:
> QorIQ platforms like B4/T4 have support of srk key table and key
> revocation in ISBC code in Silicon.
> The srk key table allows the user to have a key table with multiple
> keys and revoke any key in case of particular key gets compromised.
> In case the ISBC code uses the key revocation and srk key table to
> verify the u-boot code, the subsequent chain of trust should also
> use the same.
> 6. ISBC KEY EXTENSION Feature:
> This feature allows large number of keys to be used for esbc validation
> of images. A set of public keys is being signed and validated by ISBC
> which can be further used for esbc validation of images.
>
> Signed-off-by: Ruchika Gupta <ruchika.gupta at freescale.com>
> Signed-off-by: Gaurav Rana <gaurav.rana at freescale.com>
> ---
> Changes in v3:
> No change. Change in other patches of the patch set.
>
> Changes in v2:
> Copyright is changed in all the files in the patch.
Applied to u-boot-mpc85xx master after fixing commit message indentation,
awaiting for upstream.
York
More information about the U-Boot
mailing list