[U-Boot] [PATCH v3] fastboot: add support for reboot-bootloader command

[Steve Rae]

On 15-02-25 06:10 AM, Alexey Firago wrote:
> The "fastboot reboot-bootloader" command is defined to
> re-enter into fastboot mode after rebooting into
> bootloader. This command is usually used after updating
> bootloader via fastboot.
>
> This commit implements only a generic side of the
> command - setting of the reset flag and then resetting.
> Setting of the reset flag is implemented using __weak
> fb_set_reboot_flag() function. The actual setting and
> checking of the reset flag should be implemented by
> a boot script and/or board/SoC specific code.
>
> Signed-off-by: Alexey Firago <alexey_firago at mentor.com>
> ---
>
> Changes in v3:
> - return -ENOSYS from default fb_set_reboot_flag()
>
> Changes in v2:
> - return error in default fb_set_reboot_flag()
>
>   drivers/usb/gadget/f_fastboot.c | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
>
> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> index 310175a..a000c25 100644
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -122,6 +122,7 @@ static struct usb_gadget_strings *fastboot_strings[] = {
>   };
>
>   static void rx_handler_command(struct usb_ep *ep, struct usb_request *req);
> +static int strcmp_l1(const char *s1, const char *s2);
>
>   static void fastboot_complete(struct usb_ep *ep, struct usb_request *req)
>   {
> @@ -317,8 +318,20 @@ static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
>   	do_reset(NULL, 0, 0, NULL);
>   }
>
> +int __weak fb_set_reboot_flag(void)
> +{
> +	return -ENOSYS;
> +}
> +
>   static void cb_reboot(struct usb_ep *ep, struct usb_request *req)
>   {
> +	char *cmd = req->buf;
> +	if (!strcmp_l1("reboot-bootloader", cmd)) {
> +		if (fb_set_reboot_flag()) {
> +			fastboot_tx_write_str("FAILCannot set reboot flag");
> +			return;
> +		}
> +	}
>   	fastboot_func->in_req->complete = compl_do_reset;
>   	fastboot_tx_write_str("OKAY");
>   }
>

Tested-by: Steve Rae <srae at broadcom.com>

(on bcm28155_ap board)
Thanks!