[U-Boot] [PATCH v2 04/12] dm: pmic: add implementation of driver model regulator uclass
Robert Baldyga
r.baldyga at samsung.com
Tue Mar 10 12:41:24 CET 2015
Hi,
On 03/03/2015 05:24 PM, Przemyslaw Marczak wrote:
> This is the implementation of driver model regulator uclass api.
> To use it, the CONFIG_DM_PMIC is required with driver implementation,
> since it provides pmic devices basic I/O API.
>
> The regulator framework is based on a 'struct dm_regulator_ops'.
> It provides a common function calls, for it's basic features:
> - regulator_get_cnt() - number of outputs each type
> - regulator_get_value_desc() - describe output value limits
> - regulator_get_mode_desc() - describe output operation modes
> - regulator_get/set_value() - output value (uV)
> - regulator_get/set_state() - output on/off state
> - regulator_get/set_mode() - output operation mode
>
> To get the regulator device:
> - regulator_get() - by name only
> - regulator_i2c_get() - by i2c bus address (of pmic parent)
> - regulator_spi_get() - by spi bus address (of pmic parent)
>
> An optional and useful regulator framework features are two descriptors:
> - struct regulator_desc - describes the regulator name and output value limits
> should be defined by device driver for each regulator output.
>
> - struct regulator_mode_desc - (array) describes a number of operation modes
> supported by each regulator output.
>
> The regulator framework features are described in file:
> - include/power/regulator.h
>
> Main files:
> - drivers/power/regulator-uclass.c - provides regulator common functions api
> - include/power/regulator.h - define all structures required by the regulator
>
> Changes:
> - new uclass-id: UCLASS_PMIC_REGULATOR
> - new config: CONFIG_DM_REGULATOR
>
> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
> ---
> Changes V2:
> - new operations for regulator uclass:
> -- get/set output state - for output on/off setting
> --- add enum: REGULATOR_OFF, REGULATOR_ON
>
> - regulator uclass code rework and cleanup:
> -- change name of:
> --- enum 'regulator_desc_type' to 'regulator_type'
> --- add type DVS
> --- struct 'regulator_desc' to 'regulator_value_desc'
>
> -- regulator ops function calls:
> --- remove 'ldo/buck' from naming
> --- add new argument 'type' for define regulator type
>
> -- regulator.h - update comments
> ---
> drivers/power/Makefile | 1 +
> drivers/power/regulator-uclass.c | 227 ++++++++++++++++++++++++++++
> include/dm/uclass-id.h | 1 +
> include/power/regulator.h | 310 +++++++++++++++++++++++++++++++++++++++
> 4 files changed, 539 insertions(+)
> create mode 100644 drivers/power/regulator-uclass.c
> create mode 100644 include/power/regulator.h
>
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index 5c9a189..a6b7012 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -22,3 +22,4 @@ obj-$(CONFIG_POWER_FSL) += power_fsl.o
> obj-$(CONFIG_POWER_I2C) += power_i2c.o
> obj-$(CONFIG_POWER_SPI) += power_spi.o
> obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
> +obj-$(CONFIG_DM_REGULATOR) += regulator-uclass.o
> diff --git a/drivers/power/regulator-uclass.c b/drivers/power/regulator-uclass.c
> new file mode 100644
> index 0000000..6b5c678
> --- /dev/null
> +++ b/drivers/power/regulator-uclass.c
> @@ -0,0 +1,227 @@
> +/*
> + * Copyright (C) 2014-2015 Samsung Electronics
> + * Przemyslaw Marczak <p.marczak at samsung.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +#include <common.h>
> +#include <linux/types.h>
> +#include <fdtdec.h>
> +#include <dm.h>
> +#include <power/pmic.h>
> +#include <power/regulator.h>
> +#include <compiler.h>
> +#include <dm/device.h>
> +#include <dm/lists.h>
> +#include <dm/device-internal.h>
> +#include <errno.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int regulator_get_cnt(struct udevice *dev, int type, int *cnt)
> +{
> + const struct dm_regulator_ops *ops;
> +
> + ops = pmic_get_uclass_ops(dev, UCLASS_PMIC_REGULATOR);
> + if (!ops)
> + return -ENODEV;
> +
> + if (!ops->get_cnt)
> + return -EPERM;
> +
> + return ops->get_cnt(dev, type, cnt);
> +}
> +
> +int regulator_get_value_desc(struct udevice *dev, int type, int number,
> + struct regulator_value_desc **desc)
> +{
> + const struct dm_regulator_ops *ops;
> +
> + ops = pmic_get_uclass_ops(dev, UCLASS_PMIC_REGULATOR);
> + if (!ops)
> + return -ENXIO;
> +
> + if (!ops->get_value_desc)
> + return -EPERM;
> +
> + return ops->get_value_desc(dev, type, number, desc);
> +}
> +
> +int regulator_get_mode_desc(struct udevice *dev, int type, int number,
> + int *mode_cnt, struct regulator_mode_desc **desc)
> +{
> + const struct dm_regulator_ops *ops;
> +
> + ops = pmic_get_uclass_ops(dev, UCLASS_PMIC_REGULATOR);
> + if (!ops)
> + return -ENXIO;
> +
> + if (!ops->get_mode_desc_array)
> + return -EPERM;
> +
> + return ops->get_mode_desc_array(dev, type, number, mode_cnt, desc);
> +}
> +
> +int regulator_get_value(struct udevice *dev, int type, int number, int *value)
> +{
> + const struct dm_regulator_ops *ops;
> +
> + ops = pmic_get_uclass_ops(dev, UCLASS_PMIC_REGULATOR);
> + if (!ops)
> + return -ENODEV;
> +
> + if (!ops->get_value)
> + return -EPERM;
> +
> + return ops->get_value(dev, type, number, value);
> +}
> +
> +int regulator_set_value(struct udevice *dev, int type, int number, int value)
> +{
> + const struct dm_regulator_ops *ops;
> +
> + ops = pmic_get_uclass_ops(dev, UCLASS_PMIC_REGULATOR);
> + if (!ops)
> + return -ENODEV;
> +
> + if (!ops->set_value)
> + return -EPERM;
> +
> + return ops->set_value(dev, type, number, value);
> +}
> +
> +int regulator_get_state(struct udevice *dev, int type, int number, int *state)
> +{
> + const struct dm_regulator_ops *ops;
> +
> + ops = pmic_get_uclass_ops(dev, UCLASS_PMIC_REGULATOR);
> + if (!ops)
> + return -ENODEV;
> +
> + if (!ops->get_state)
> + return -EPERM;
> +
> + return ops->get_state(dev, type, number, state);
> +}
> +
> +int regulator_set_state(struct udevice *dev, int type, int number, int state)
> +{
> + const struct dm_regulator_ops *ops;
> +
> + ops = pmic_get_uclass_ops(dev, UCLASS_PMIC_REGULATOR);
> + if (!ops)
> + return -ENODEV;
> +
> + if (!ops->set_state)
> + return -EPERM;
> +
> + return ops->set_state(dev, type, number, state);
> +}
> +
> +int regulator_get_mode(struct udevice *dev, int type, int number, int *mode)
> +{
> + const struct dm_regulator_ops *ops;
> +
> + ops = pmic_get_uclass_ops(dev, UCLASS_PMIC_REGULATOR);
> + if (!ops)
> + return -ENODEV;
> +
> + if (!ops->get_mode)
> + return -EPERM;
> +
> + return ops->get_mode(dev, type, number, mode);
> +}
> +
> +int regulator_set_mode(struct udevice *dev, int type, int number, int mode)
> +{
> + const struct dm_regulator_ops *ops;
> +
> + ops = pmic_get_uclass_ops(dev, UCLASS_PMIC_REGULATOR);
> + if (!ops)
> + return -ENODEV;
> +
> + if (!ops->set_mode)
> + return -EPERM;
> +
> + return ops->set_mode(dev, type, number, mode);
> +}
> +
> +int regulator_get(char *name, struct udevice **regulator)
> +{
> + struct udevice *dev;
> + struct uclass *uc;
> + int ret;
> +
> + ret = uclass_get(UCLASS_PMIC_REGULATOR, &uc);
> + if (ret) {
> + error("Regulator uclass not initialized!");
> + return ret;
> + }
> +
> + uclass_foreach_dev(dev, uc) {
> + if (!dev)
> + continue;
> +
> + if (!strncmp(name, dev->name, strlen(name))) {
> + ret = device_probe(dev);
> + if (ret)
> + error("Dev: %s probe failed", dev->name);
> + *regulator = dev;
Shouldn't we set regulator=NULL if device_probe() returns an error?
> + return ret;
> + }
> + }
> +
> + *regulator = NULL;
> + return -EINVAL;
> +}
> +
> +int regulator_i2c_get(int bus, int addr, struct udevice **regulator)
> +{
> + struct udevice *pmic;
> + int ret;
> +
> + /* First get parent pmic device */
> + ret = pmic_i2c_get(bus, addr, &pmic);
> + if (ret) {
> + error("Chip: %d on bus %d not found!", addr, bus);
> + return ret;
> + }
> +
> + /* Get the first regulator child of pmic device */
> + if (device_get_first_child_by_uclass_id(pmic, UCLASS_PMIC_REGULATOR,
> + regulator)) {
> + error("PMIC: %s regulator child not found!", pmic->name);
> + *regulator = NULL;
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +int regulator_spi_get(int bus, int cs, struct udevice **regulator)
> +{
> + struct udevice *pmic;
> + int ret;
> +
> + /* First get parent pmic device */
> + ret = pmic_spi_get(bus, cs, &pmic);
> + if (ret) {
> + error("Chip: %d on bus %d not found!", cs, bus);
> + return ret;
> + }
> +
> + /* Get the first regulator child of pmic device */
> + if (device_get_first_child_by_uclass_id(pmic, UCLASS_PMIC_REGULATOR,
> + regulator)) {
> + error("PMIC: %s regulator child not found!", pmic->name);
> + *regulator = NULL;
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +UCLASS_DRIVER(regulator) = {
> + .id = UCLASS_PMIC_REGULATOR,
> + .name = "regulator",
> +};
> diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
> index ff360ac..0a1e664 100644
> --- a/include/dm/uclass-id.h
> +++ b/include/dm/uclass-id.h
> @@ -37,6 +37,7 @@ enum uclass_id {
>
> /* PMIC uclass and PMIC related uclasses */
> UCLASS_PMIC,
> + UCLASS_PMIC_REGULATOR,
>
> UCLASS_COUNT,
> UCLASS_INVALID = -1,
> diff --git a/include/power/regulator.h b/include/power/regulator.h
> new file mode 100644
> index 0000000..ee8a280
> --- /dev/null
> +++ b/include/power/regulator.h
> @@ -0,0 +1,310 @@
> +/*
> + * Copyright (C) 2014-2015 Samsung Electronics
> + * Przemyslaw Marczak <p.marczak at samsung.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _INCLUDE_REGULATOR_H_
> +#define _INCLUDE_REGULATOR_H_
> +
> +#define DESC_NAME_LEN 20
> +
> +/* enum regulator_type - used for regulator_*() variant calls */
> +enum regulator_type {
> + REGULATOR_TYPE_LDO = 0,
> + REGULATOR_TYPE_BUCK,
> + REGULATOR_TYPE_DVS,
> +};
> +
> +/* enum regulator_out_state - used for ldo/buck output state setting */
> +enum regulator_out_state {
> + REGULATOR_OFF = 0,
> + REGULATOR_ON,
> +};
> +
> +/**
> + * struct regulator_value_desc - this structure holds an information about
> + * each regulator voltage limits. There is no "step" voltage value - so driver
> + * should take care of this. This is rather platform specific so can be
> + * taken from the device-tree.
> + *
> + * @type - one of: DESC_TYPE_LDO, DESC_TYPE_BUCK or DESC_TYPE_DVS
> + * @number - hardware internal regulator number
> + * @min_uV - minimum voltage (micro Volts)
> + * @max_uV - maximum voltage (micro Volts)
> + * @name - name of regulator - usually will be taken from device tree and
> + * can describe regulator output connected hardware, e.g. "eMMC"
> +*/
> +struct regulator_value_desc {
> + int type;
> + int number;
> + int min_uV;
> + int max_uV;
> + char name[DESC_NAME_LEN];
> +};
> +
> +/**
> + * struct regulator_mode_desc - this structure holds an information about
> + * each regulator operation modes. Probably in most cases - an array.
> + * This will be probably a driver static data since it's device specific.
> + *
> + * @mode - a driver specific mode number - used for regulator command
> + * @register_value - a driver specific value for this mode
> + * @name - the name of mode - used for regulator command
> + */
> +struct regulator_mode_desc {
> + int mode;
> + int register_value;
> + char *name;
> +};
> +
> +/* PMIC regulator device operations */
> +struct dm_regulator_ops {
> + /**
> + * get_cnt - get the number of a given regulator 'type' outputs
> + *
> + * @dev - regulator device
> + * @type - regulator type, one of enum regulator_type
> + * Gets:
> + * @cnt - regulator count
> + * Returns: 0 on success or negative value of errno.
> + */
> + int (*get_cnt)(struct udevice *dev, int type, int *cnt);
> +
> + /**
> + * Regulator output value descriptor is specific for each output.
> + * It's usually driver static data, but output value limits are
> + * often defined in the device-tree, so those are platform dependent
> + * attributes.
> + *
> + * get_value_desc - get value descriptor of the given regulator output
> + * @dev - regulator device
> + * @type - regulator type, one of enum regulator_type
> + * @number - regulator number
> + * Gets:
> + * @desc - pointer to the descriptor
> + * Returns: 0 on success or negative value of errno.
> + */
> + int (*get_value_desc)(struct udevice *dev, int type, int number,
> + struct regulator_value_desc **desc);
> +
> + /**
> + * Regulator output mode descriptors are device specific.
> + * It's usually driver static data.
> + * Each regulator output can support different mode types,
> + * so usually will return an array with a number 'mode_desc_cnt'
> + * of mode descriptors.
> + *
> + * get_mode_desc_array - get mode descriptor array of the given
> + * regulator output number
> + * @dev - regulator device
> + * @type - regulator type, one of 'enum regulator_type'
> + * @number - regulator number
> + * Gets:
> + * @mode_desc_cnt - descriptor array entry count
> + * @desc - pointer to the descriptor array
> + * Returns: 0 on success or negative value of errno.
> + */
> + int (*get_mode_desc_array)(struct udevice *dev, int type,
> + int number, int *mode_desc_cnt,
> + struct regulator_mode_desc **desc);
> +
> + /**
> + * The regulator output value function calls operates on a micro Volts,
> + * however the regulator commands operates on a mili Volt unit.
> + *
> + * get/set_value - get/set output value of the given output number
> + * @dev - regulator device
> + * @type - regulator type, one of 'enum regulator_type'
> + * @number - regulator number
> + * Sets/Gets:
> + * @value - set or get output value
> + * Returns: 0 on success or negative value of errno.
> + */
> + int (*get_value)(struct udevice *dev, int type, int number, int *value);
> + int (*set_value)(struct udevice *dev, int type, int number, int value);
> +
> + /**
> + * The most basic feature of the regulator output is it's on/off state.
> + *
> + * get/set_state - get/set on/off state of the given output number
> + * @dev - regulator device
> + * @type - regulator type, one of 'enum regulator_type'
> + * @number - regulator number
> + * Sets/Gets:
> + * @state - set or get one of 'enum regulator_out_state'
> + * Returns: 0 on success or negative value of errno.
> + */
> + int (*get_state)(struct udevice *dev, int type, int number, int *state);
> + int (*set_state)(struct udevice *dev, int type, int number, int state);
> +
> + /**
> + * The 'get/set_mode()' function calls should operate on a driver
> + * specific mode definitions, which should be found in:
> + * field 'mode' of struct regulator_mode_desc.
> + *
> + * get/set_mode - get/set operation mode of the given output number
> + * @dev - regulator device
> + * @type - regulator type, one of 'enum regulator_type'
> + * @number - regulator number
> + * Sets/Gets:
> + * @mode - set or get output mode
> + * Returns: 0 on success or negative value of errno.
> + */
> + int (*get_mode)(struct udevice *dev, int type, int number, int *mode);
> + int (*set_mode)(struct udevice *dev, int type, int number, int mode);
> +};
> +
> +/**
> + * regulator_get_cnt: returns the number of driver registered regulators.
> + * This is used for pmic regulator command purposes.
> + *
> + * @dev - pointer to the regulator device
> + * @type - regulator type: device specific
> + * Gets:
> + * @cnt - regulator count
> + * Returns: 0 on success or negative value of errno.
> + */
> +int regulator_get_cnt(struct udevice *dev, int type, int *cnt);
> +
> +/**
> + * regulator_get_value_desc: returns a pointer to the regulator value
> + * descriptor of a given device regulator output number.
> + *
> + * @dev - pointer to the regulator device
> + * @type - regulator descriptor type
> + * @number - descriptor number (regulator output number)
> + * Gets:
> + * @desc - pointer to the descriptor
> + * Returns: 0 on success or negative value of errno.
> + */
> +int regulator_get_value_desc(struct udevice *dev, int type, int number,
> + struct regulator_value_desc **desc);
> +
> +/**
> + * regulator_get_mode_desc: returns a pointer to the array of regulator mode
> + * descriptors of a given device regulator type and number.
> + *
> + * @dev - pointer to the regulator device
> + * @type - regulator type: device specific
> + * @number - output number: device specific
> + * Gets:
> + * @mode_cnt - descriptor array entry count
> + * @desc - pointer to the descriptor array
> + * Returns: 0 on success or negative value of errno.
> + */
> +int regulator_get_mode_desc(struct udevice *dev, int type, int number,
> + int *mode_cnt, struct regulator_mode_desc **desc);
> +
> +/**
> + * regulator_get_value: returns voltage value of a given device
> + * regulator type number.
> + *
> + * @dev - pointer to the regulator device
> + * @type - regulator type: device specific
> + * @number - output number: device specific
> + * Gets:
> + * @val - returned voltage - unit: uV (micro Volts)
> + * Returns: 0 on success or negative value of errno.
> + */
> +int regulator_get_value(struct udevice *dev, int type, int number, int *val);
> +
> +/**
> + * regulator_set_value: set the voltage value of a given device regulator type
> + * number to the given one passed by the argument: @val
> + *
> + * @dev - pointer to the regulator device
> + * @type - regulator type: device specific
> + * @number - output number: device specific
> + * @val - voltage value to set - unit: uV (micro Volts)
> + * Returns - 0 on success or -errno val if fails
> + */
> +int regulator_set_value(struct udevice *dev, int type, int number, int val);
> +
> +/**
> + * regulator_get_state: returns output state of a given device
> + * regulator type number.
> + *
> + * @dev - pointer to the regulator device
> + * @type - regulator type, device specific
> + * @number - regulator number, device specific
> + * Gets:
> + * @state - returned regulator number output state:
> + * - REGULATOR_OFF (0) - disable
> + * - REGULATOR_ON (1) - enable
> + * Returns: - 0 on success or -errno val if fails
> + */
> +int regulator_get_state(struct udevice *dev, int type, int number, int *state);
> +
> +/**
> + * regulator_set_state: set output state of a given device regulator type
> + * number to the given one passed by the argument: @state
> + *
> + * @dev - pointer to the regulator device
> + * @type - regulator type: device specific
> + * @number - output number: device specific
> + * @state - output state to set
> + * - enum REGULATOR_OFF == 0 - disable
> + * - enum REGULATOR_ON == 1 - enable
> + * Returns - 0 on success or -errno val if fails
> + */
> +int regulator_set_state(struct udevice *dev, int type, int number, int state);
> +
> +/**
> + * regulator_get_mode: get mode number of a given device regulator type number
> + *
> + * @dev - pointer to the regulator device
> + * @type - output number: device specific
> + * @number - output number: device specific
> + * Gets:
> + * @mode - returned mode number
> + * Returns - 0 on success or -errno val if fails
> + * Note:
> + * The regulator driver should return one of defined, mode number rather
> + * than the raw register value. The struct type 'regulator_mode_desc' has
> + * a mode field for this purpose and register_value for a raw register value.
> + */
> +int regulator_get_mode(struct udevice *dev, int type, int number, int *mode);
> +
> +/**
> + * regulator_set_mode: set given regulator type and number mode to the given
> + * one passed by the argument: @mode
> + *
> + * @dev - pointer to the regulator device
> + * @type - output number: device specific
> + * @number - output number: device specific
> + * @mode - mode type (struct regulator_mode_desc.mode)
> + * Returns - 0 on success or -errno value if fails
> + * Note:
> + * The regulator driver should take one of defined, mode number rather
> + * than a raw register value. The struct type 'regulator_mode_desc' has
> + * a mode field for this purpose and register_value for a raw register value.
> + */
> +int regulator_set_mode(struct udevice *dev, int type, int number, int mode);
> +
> +/**
> + * regulator_..._get: returns the pointer to the pmic regulator device
> + * by specified arguments:
> + *
> + * NAME:
> + * @name - device name (useful for specific names)
> + * or SPI/I2C interface:
> + * @bus - device I2C/SPI bus number
> + * @addr_cs - device specific address for I2C or chip select for SPI,
> + * on the given bus number
> + * Gets:
> + * @regulator - pointer to the pmic device
> + * Returns: 0 on success or negative value of errno.
> + *
> + * The returned 'regulator' device can be used with:
> + * - regulator_get/set_*
> + * and if pmic_platdata is given, then also with:
> + * - pmic_if_* calls
> + * The last one is used for the pmic command purposes.
> + */
> +int regulator_get(char *name, struct udevice **regulator);
> +int regulator_i2c_get(int bus, int addr, struct udevice **regulator);
> +int regulator_spi_get(int bus, int cs, struct udevice **regulator);
> +
> +#endif /* _INCLUDE_REGULATOR_H_ */
>
Br,
Robert
More information about the U-Boot
mailing list