[U-Boot] [PATCH v2] T2080QDS/PCIe: Soft Reset PCIe for down-training issue

[Zhao Qiang]

T2080QDS PEX1/Slot#1 will down-train from x4 to x2,
Soft reset PCIe can fix this issue, this is a workaround.

Signed-off-by: Zhao Qiang <B45475 at freescale.com>
---
changes for v2
	- modify the commit message

 drivers/pci/fsl_pci_init.c | 17 +++++++++++++++++
 include/configs/T208xQDS.h |  1 +
 2 files changed, 18 insertions(+)

diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 231b075..327fa7d 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -481,6 +481,23 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
 #endif
 	}
 
+#ifdef CONFIG_FSL_PCIE_T2080QDS_RESET
+		int i;
+		/* assert PCIe reset */
+		setbits_be32(&pci->pdb_stat, 0x08000000);
+		(void) in_be32(&pci->pdb_stat);
+		udelay(1000);
+		/* clear PCIe reset */
+		clrbits_be32(&pci->pdb_stat, 0x08000000);
+		asm("sync;isync");
+		for (i = 0; i < 100 && ltssm < PCI_LTSSM_L0; i++) {
+			pci_hose_read_config_word(hose, dev, PCI_LTSSM,
+						  &ltssm);
+			udelay(1000);
+		}
+
+#endif
+
 #ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
 		if (enabled == 0) {
 			serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 395472b..851b4f9 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -558,6 +558,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCIE2		/* PCIE controler 2 */
 #define CONFIG_PCIE3		/* PCIE controler 3 */
 #define CONFIG_PCIE4		/* PCIE controler 4 */
+#define CONFIG_FSL_PCIE_T2080QDS_RESET
 #define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT	/* enable 64-bit PCI resources */
 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
-- 
2.1.0.27.g96db324