[U-Boot] [PATCH 2/3] arm: mx6: tqma6: Update to optionally configure an alternative SPI setup

[Markus Niebel]

Hello Stefan,

Am 12.03.2015 um 13:34 schrieb Stefan Roese:
> By making the tqma6_iomuxc_spi() weak, this patch adds the possibility to
> add a different function for this SPI configuration. This can be used
> by other baseboards, that might have a different SPI setup.
> 
> This patch will be used by the upcoming WRU-IV board support which also
> uses the TQMa6 SoM.
> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> ---
>  board/tqc/tqma6/tqma6.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c
> index c9e163e..29db838 100644
> --- a/board/tqc/tqma6/tqma6.c
> +++ b/board/tqc/tqma6/tqma6.c
> @@ -145,7 +145,7 @@ static unsigned const tqma6_ecspi1_cs[] = {
>  	TQMA6_SF_CS_GPIO,
>  };
>  
> -static void tqma6_iomuxc_spi(void)
> +__weak void tqma6_iomuxc_spi(void)
>  {
>  	unsigned i;
>  
When implementing an baseboard specific init handler, we will get a warning about unused 
tqma6_ecspi1_pads and tqma6_ecspi1_cs, or did I miss something?

Just as a thought (not ready): Could we supply CS initialisation data via defines in the
baseboard config header and append it to the tables if needed?

Regards

Markus