[U-Boot] [PATCH 2/3] vexpress64: juno: add default NOR flash boot

Linus Walleij linus.walleij at linaro.org
Mon Mar 16 13:23:52 CET 2015


This modifies the vexpress64 Juno configuration so that
it will by default load and boot a kernel and a device tree
from the images stored in the NOR flash. When we are
at it, also define the proper command line for the Juno and
indicate that the USB stick (/dev/sda1) is the default
root file system.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 include/configs/vexpress_aemv8a.h | 32 ++++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 810eef12deb1..e6fc2aeea2b8 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -198,14 +198,41 @@
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
 /* Initial environment variables */
-#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+/*
+ * Defines where the kernel and FDT exist in NOR flash and where it will
+ * be copied into DRAM
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+				"kernel_name=Image\0"	\
+				"kernel_addr=0x80000000\0" \
+				"fdt_name=juno\0" \
+				"fdt_addr=0x83000000\0" \
+				"fdt_high=0xffffffffffffffff\0" \
+				"initrd_high=0xffffffffffffffff\0" \
+
+/* Assume we boot with root on the first partition of a USB stick */
+#define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 " \
+				"root=/dev/sda1 rw " \
+				"earlyprintk=pl011,0x7ff80000 debug user_debug=31 "\
+				"loglevel=9"
+
+/* Copy the kernel and FDT to DRAM memory and boot */
+#define CONFIG_BOOTCOMMAND	"afs load ${kernel_name} ${kernel_addr} ; " \
+				"afs load  ${fdt_name} ${fdt_addr} ; " \
+				"fdt addr ${fdt_addr}; fdt resize; " \
+				"booti ${kernel_addr} - ${fdt_addr}"
+
+#define CONFIG_BOOTDELAY		1
+
+#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 				"kernel_name=uImage\0"	\
 				"kernel_addr_r=0x80000000\0"	\
 				"initrd_name=ramdisk.img\0"	\
 				"initrd_addr_r=0x88000000\0"	\
 				"fdt_name=devtree.dtb\0"		\
-				"fdt_addr_r=0x83000000\0"		\
+				"fdt_addr_r=0x83000000\0" \
 				"fdt_high=0xffffffffffffffff\0"	\
 				"initrd_high=0xffffffffffffffff\0"
 
@@ -253,6 +280,7 @@
 #define CONFIG_SYS_NO_FLASH
 #else
 #define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ARMFLASH
 #define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER		1
 #define CONFIG_SYS_FLASH_BASE		0x08000000
-- 
1.9.3



More information about the U-Boot mailing list