[U-Boot] [PATCH 2/2] board/BuR/common: remove unused function 'blink'

[Hannes Petermaier]

From: Hannes Petermaier <hannes.petermaier at br-automation.com>

since we have possibility to write out on lcd whats going on, we don't need
the gpio blink functionality anymore.

Signed-off-by: Hannes Petermaier <hannes.petermaier at br-automation.com>

Signed-off-by: Hannes Petermaier <oe5hpm at oevsv.at>
---

 board/BuR/common/bur_common.h |    1 -
 board/BuR/common/common.c     |   14 --------------
 2 files changed, 15 deletions(-)

diff --git a/board/BuR/common/bur_common.h b/board/BuR/common/bur_common.h
index 3061e4c..e4896fb 100644
--- a/board/BuR/common/bur_common.h
+++ b/board/BuR/common/bur_common.h
@@ -16,7 +16,6 @@
 
 int load_lcdtiming(struct am335x_lcdpanel *panel);
 void br_summaryscreen(void);
-void blink(u32 blinks, u32 intervall, u32 pin);
 void pmicsetup(u32 mpupll);
 void enable_uart0_pin_mux(void);
 void enable_i2c_pin_mux(void);
diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c
index 91834eb..ccaa9c6 100644
--- a/board/BuR/common/common.c
+++ b/board/BuR/common/common.c
@@ -441,20 +441,6 @@ void lcd_enable(void)
 #error "LCD-support with a suitable FB-Driver is mandatory !"
 #endif /* CONFIG_LCD */
 
-void blink(u32 blinks, u32 intervall, u32 pin)
-{
-	gpio_direction_output(pin, 0);
-	int val = 0;
-
-	do {
-		val ^= 0x01;
-		gpio_set_value(pin, val);
-		mdelay(intervall);
-	} while (blinks--);
-
-	gpio_set_value(pin, 0);
-}
-
 #ifdef CONFIG_SPL_BUILD
 void pmicsetup(u32 mpupll)
 {
-- 
1.7.9.5