[U-Boot] [PATCH 19/28] armv8/ls2085aqds: Add support of LS2085AQDS platform
York Sun
yorksun at freescale.com
Thu Mar 19 17:45:50 CET 2015
The LS2080AQDS is an evaluatoin platform that supports the LS2080A
family SoCs. This patch add basic support of the platform.
Signed-off-by: York Sun <yorksun at freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar at freescale.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma at freescale.com>
---
arch/arm/Kconfig | 11 +
arch/arm/cpu/armv8/fsl-lsch3/README | 70 ++++-
board/freescale/{ls1021aqds => ls2085aqds}/Kconfig | 9 +-
board/freescale/ls2085aqds/MAINTAINERS | 7 +
board/freescale/ls2085aqds/Makefile | 8 +
board/freescale/ls2085aqds/README | 129 +++++++++
board/freescale/{ls2085a => ls2085aqds}/ddr.c | 126 ++++-----
board/freescale/{ls2085a => ls2085aqds}/ddr.h | 28 +-
board/freescale/ls2085aqds/ls2085aqds.c | 287 ++++++++++++++++++++
.../ls2085aqds_qixis.h} | 19 +-
...qds_ddr4_nor_defconfig => ls2085aqds_defconfig} | 2 +-
include/configs/ls2085a_common.h | 38 ++-
include/configs/ls2085aqds.h | 283 +++++++++++++++++++
include/fsl_ddr_sdram.h | 1 +
14 files changed, 902 insertions(+), 116 deletions(-)
copy board/freescale/{ls1021aqds => ls2085aqds}/Kconfig (54%)
create mode 100644 board/freescale/ls2085aqds/MAINTAINERS
create mode 100644 board/freescale/ls2085aqds/Makefile
create mode 100644 board/freescale/ls2085aqds/README
copy board/freescale/{ls2085a => ls2085aqds}/ddr.c (64%)
copy board/freescale/{ls2085a => ls2085aqds}/ddr.h (63%)
create mode 100644 board/freescale/ls2085aqds/ls2085aqds.c
copy board/freescale/{ls1021aqds/ls1021aqds_qixis.h => ls2085aqds/ls2085aqds_qixis.h} (53%)
copy configs/{ls1021aqds_ddr4_nor_defconfig => ls2085aqds_defconfig} (66%)
create mode 100644 include/configs/ls2085aqds.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b9ebee1..f4a7851 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -648,6 +648,16 @@ config TARGET_LS2085A_SIMU
select ARM64
select ARMV8_MULTIENTRY
+config TARGET_LS2085AQDS
+ bool "Support ls2085aqds"
+ select ARM64
+ select ARMV8_MULTIENTRY
+ help
+ Support for Freescale LS2085AQDS platform
+ The LS2085A Development System (QDS) is a high-performance
+ development platform that supports the QorIQ LS2085A
+ Layerscape Architecture processor.
+
config TARGET_LS1021AQDS
bool "Support ls1021aqds"
select CPU_V7
@@ -793,6 +803,7 @@ source "board/denx/m53evk/Kconfig"
source "board/embest/mx6boards/Kconfig"
source "board/esg/ima3-mx53/Kconfig"
source "board/freescale/ls2085a/Kconfig"
+source "board/freescale/ls2085aqds/Kconfig"
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
source "board/freescale/mx23evk/Kconfig"
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README
index f781620..817ea1b 100644
--- a/arch/arm/cpu/armv8/fsl-lsch3/README
+++ b/arch/arm/cpu/armv8/fsl-lsch3/README
@@ -11,28 +11,82 @@ for example LS2085A.
Flash Layout
============
-A typical layout of various images (including Linux and other firmware images)
-is shown below considering a 32MB NOR flash device:
+
+(1) A typical layout of various images (including Linux and other firmware images)
+ is shown below considering a 32MB NOR flash device present on most
+ pre-silicon platforms (simulator and emulator):
-------------------------
- | linux |
+ | FIT Image |
+ | (linux + DTB + RFS) |
------------------------- ----> 0x0120_0000
- | Debug Server |
+ | Debug Server FW |
------------------------- ----> 0x00C0_0000
- | AIOP SW |
+ | AIOP FW |
------------------------- ----> 0x0070_0000
| MC FW |
------------------------- ----> 0x006C_0000
- | MC Data Path Layout |
+ | MC DPL Blob |
------------------------- ----> 0x0020_0000
- | BootLoader |
+ | BootLoader + Env|
------------------------- ----> 0x0000_1000
| PBI |
------------------------- ----> 0x0000_0080
| RCW |
------------------------- ----> 0x0000_0000
- 32-MB NOR flash layout
+ 32-MB NOR flash layout for pre-silicon platforms (simulator and emulator)
+
+(2) A typical layout of various images (including Linux and other firmware images)
+ is shown below considering a 128MB NOR flash device present on QDS
+ boards:
+ ----------------------------------------- ----> 0x5_8800_0000 ---
+ | .. Unused .. (7M) | |
+ ----------------------------------------- ----> 0x5_8790_0000 |
+ | FIT Image (linux + DTB + RFS) (40M) | |
+ ----------------------------------------- ----> 0x5_8510_0000 |
+ | PHY firmware (2M) | |
+ ----------------------------------------- ----> 0x5_84F0_0000 | 64K
+ | Debug Server FW (2M) | | Alt
+ ----------------------------------------- ----> 0x5_84D0_0000 | Bank
+ | AIOP FW (4M) | |
+ ----------------------------------------- ----> 0x5_8490_0000 (vbank4)
+ | MC DPC Blob (1M) | |
+ ----------------------------------------- ----> 0x5_8480_0000 |
+ | MC DPL Blob (1M) | |
+ ----------------------------------------- ----> 0x5_8470_0000 |
+ | MC FW (4M) | |
+ ----------------------------------------- ----> 0x5_8430_0000 |
+ | BootLoader Environment (1M) | |
+ ----------------------------------------- ----> 0x5_8420_0000 |
+ | BootLoader (1M) | |
+ ----------------------------------------- ----> 0x5_8410_0000 |
+ | RCW and PBI (1M) | |
+ ----------------------------------------- ----> 0x5_8400_0000 ---
+ | .. Unused .. (7M) | |
+ ----------------------------------------- ----> 0x5_8390_0000 |
+ | FIT Image (linux + DTB + RFS) (40M) | |
+ ----------------------------------------- ----> 0x5_8110_0000 |
+ | PHY firmware (2M) | |
+ ----------------------------------------- ----> 0x5_80F0_0000 | 64K
+ | Debug Server FW (2M) | | Bank
+ ----------------------------------------- ----> 0x5_80D0_0000 |
+ | AIOP FW (4M) | |
+ ----------------------------------------- ----> 0x5_8090_0000 (vbank0)
+ | MC DPC Blob (1M) | |
+ ----------------------------------------- ----> 0x5_8080_0000 |
+ | MC DPL Blob (1M) | |
+ ----------------------------------------- ----> 0x5_8070_0000 |
+ | MC FW (4M) | |
+ ----------------------------------------- ----> 0x5_8030_0000 |
+ | BootLoader Environment (1M) | |
+ ----------------------------------------- ----> 0x5_8020_0000 |
+ | BootLoader (1M) | |
+ ----------------------------------------- ----> 0x5_8010_0000 |
+ | RCW and PBI (1M) | |
+ ----------------------------------------- ----> 0x5_8000_0000 ---
+
+ 128-MB NOR flash layout for QDS board
Environment Variables
=====================
diff --git a/board/freescale/ls1021aqds/Kconfig b/board/freescale/ls2085aqds/Kconfig
similarity index 54%
copy from board/freescale/ls1021aqds/Kconfig
copy to board/freescale/ls2085aqds/Kconfig
index 119b955..deb640d 100644
--- a/board/freescale/ls1021aqds/Kconfig
+++ b/board/freescale/ls2085aqds/Kconfig
@@ -1,15 +1,16 @@
-if TARGET_LS1021AQDS
+
+if TARGET_LS2085AQDS
config SYS_BOARD
- default "ls1021aqds"
+ default "ls2085aqds"
config SYS_VENDOR
default "freescale"
config SYS_SOC
- default "ls102xa"
+ default "fsl-lsch3"
config SYS_CONFIG_NAME
- default "ls1021aqds"
+ default "ls2085aqds"
endif
diff --git a/board/freescale/ls2085aqds/MAINTAINERS b/board/freescale/ls2085aqds/MAINTAINERS
new file mode 100644
index 0000000..74b3721
--- /dev/null
+++ b/board/freescale/ls2085aqds/MAINTAINERS
@@ -0,0 +1,7 @@
+LS2085A BOARD
+M: Prabhakar Kushwaha <prabhakar at freescale.com>
+S: Maintained
+F: board/freescale/ls2085aqds/
+F: board/freescale/ls2085a/ls2085aqds.c
+F: include/configs/ls2085aqds.h
+F: configs/ls2085aqds_defconfig
diff --git a/board/freescale/ls2085aqds/Makefile b/board/freescale/ls2085aqds/Makefile
new file mode 100644
index 0000000..f174f33
--- /dev/null
+++ b/board/freescale/ls2085aqds/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright 2015 Freescale Semiconductor
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ls2085aqds.o
+obj-y += ddr.o
diff --git a/board/freescale/ls2085aqds/README b/board/freescale/ls2085aqds/README
new file mode 100644
index 0000000..a4d7b53
--- /dev/null
+++ b/board/freescale/ls2085aqds/README
@@ -0,0 +1,129 @@
+Overview
+--------
+The LS2080A Development System (QDS) is a high-performance computing,
+evaluation, and development platform that supports the QorIQ LS2080A
+LayerScape Architecture processor. The LS2080AQDS provides validation and
+SW development platform for the Freescale LS2080A processor series, with
+a complete debugging environment.
+
+LS2085A SoC Overview
+------------------
+The LS2085A integrated multicore processor combines eight ARM Cortex-A57
+processor cores with high-performance data path acceleration logic and network
+and peripheral bus interfaces required for networking, telecom/datacom,
+wireless infrastructure, and mil/aerospace applications.
+
+The LS2085A SoC includes the following function and features:
+
+ - Eight 64-bit ARM Cortex-A57 CPUs
+ - 1 MB platform cache with ECC
+ - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
+ - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
+ the AIOP
+ - Data path acceleration architecture (DPAA2) incorporating acceleration for
+ the following functions:
+ - Packet parsing, classification, and distribution (WRIOP)
+ - Queue and Hardware buffer management for scheduling, packet sequencing, and
+ congestion management, buffer allocation and de-allocation (QBMan)
+ - Cryptography acceleration (SEC) at up to 10 Gbps
+ - RegEx pattern matching acceleration (PME) at up to 10 Gbps
+ - Decompression/compression acceleration (DCE) at up to 20 Gbps
+ - Accelerated I/O processing (AIOP) at up to 20 Gbps
+ - QDMA engine
+ - 16 SerDes lanes at up to 10.3125 GHz
+ - Ethernet interfaces
+ - Up to eight 10 Gbps Ethernet MACs
+ - Up to eight 1 / 2.5 Gbps Ethernet MACs
+ - High-speed peripheral interfaces
+ - Four PCIe 3.0 controllers, one supporting SR-IOV
+ - Additional peripheral interfaces
+ - Two serial ATA (SATA 3.0) controllers
+ - Two high-speed USB 3.0 controllers with integrated PHY
+ - Enhanced secure digital host controller (eSDXC/eMMC)
+ - Serial peripheral interface (SPI) controller
+ - Quad Serial Peripheral Interface (QSPI) Controller
+ - Four I2C controllers
+ - Two DUARTs
+ - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
+ - Support for hardware virtualization and partitioning enforcement
+ - QorIQ platform's trust architecture 3.0
+ - Service processor (SP) provides pre-boot initialization and secure-boot
+ capabilities
+
+ LS2080AQDS board Overview
+ -----------------------
+ - SERDES Connections, 16 lanes supporting:
+ - PCI Express - 3.0
+ - SGMII, SGMII 2.5
+ - QSGMII
+ - SATA 3.0
+ - XAUI
+ - XFI
+ - DDR Controller
+ - Two ports of 72-bits (8-bits ECC) DDR4. Each port supports four
+ chip-selects and two DIMM connectors. Support is up to 2133MT/s.
+ - One port of 40-bits (8-bits ECC) DDR4 which supports four chip-selects
+ and two DIMM connectors. Support is up to 1600MT/s.
+ -IFC/Local Bus
+ - IFC rev. 2.0 implementation supporting Little Endian connection scheme.
+ - One in-socket 128 MB NOR flash 16-bit data bus
+ - One 512 MB NAND flash with ECC support
+ - IFC Test Port
+ - PromJet Port
+ - FPGA connection
+ - USB 3.0
+ - Two high speed USB 3.0 ports
+ - First USB 3.0 port configured as Host with Type-A connector
+ - Second USB 3.0 port configured as OTG with micro-AB connector
+ - SDHC: PCIe x1 Right Angle connector for supporting following cards
+ - 1/4-/8-bit SD/MMC Legacy CARD supporting 3.3V devices only
+ - 1-/4-/8-bit SD/MMC Card supporting 1.8V devices only
+ - 4-bit eMMC Card Rev 4.4 (1.8V only)
+ - 8-bit eMMC Card Rev 4.5 (1.8V only)
+ - SD Card Rev 2.0 and Rev 3.0
+ - DSPI: 3 high-speed flash Memory for storage
+ - 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
+ - 8 MB high-speed flash Memory (up to 104 MHz)
+ - 512 MB low-speed flash Memory (up to 40 MHz)
+ - QSPI: via NAND/QSPI Card
+ - 4 I2C controllers
+ - Two SATA onboard connectors
+ - UART
+ - Two 4-pin (HW control) or four 2-pin (SW control) serial ports at up to 115.2 Kbit/s
+ - Two DB9 D-Type connectors supporting one Serial port each
+ - ARM JTAG support
+
+Memory map from core's view
+----------------------------
+0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom
+0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR
+0x00_1800_0000 .. 0x00_181F_FFFF OCRAM
+0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1
+0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1
+0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2
+0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2
+
+Other addresses are either reserved, or not used directly by u-boot.
+This list should be updated when more addresses are used.
+
+IFC region map from core's view
+-------------------------------
+During boot i.e. IFC Region #1:-
+ 0x30000000 - 0x37ffffff : 128MB : NOR flash
+ 0x38000000 - 0x3BFFFFFF : 64MB : Promjet
+ 0x3C000000 - 0x40000000 : 64MB : FPGA etc
+
+After relocate to DDR i.e. IFC Region #2:-
+ 0x5_1000_0000..0x5_1fff_ffff Memory Hole
+ 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
+ 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
+ 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
+ 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
+
+Booting Options
+---------------
+a) Promjet Boot
+b) NOR boot
+c) NAND boot
+d) SD boot
+e) QSPI boot
diff --git a/board/freescale/ls2085a/ddr.c b/board/freescale/ls2085aqds/ddr.c
similarity index 64%
copy from board/freescale/ls2085a/ddr.c
copy to board/freescale/ls2085aqds/ddr.c
index 4884fa2..6cd5e8b 100644
--- a/board/freescale/ls2085a/ddr.c
+++ b/board/freescale/ls2085aqds/ddr.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -15,14 +15,22 @@ void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
+ u8 dq_mapping_0, dq_mapping_2, dq_mapping_3;
const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
ulong ddr_freq;
+ int slot;
- if (ctrl_num > 3) {
+ if (ctrl_num > 2) {
printf("Not supported controller number %d\n", ctrl_num);
return;
}
- if (!pdimm->n_ranks)
+
+ for (slot = 0; slot < CONFIG_DIMM_SLOTS_PER_CTLR; slot++) {
+ if (pdimm[slot].n_ranks)
+ break;
+ }
+
+ if (slot >= CONFIG_DIMM_SLOTS_PER_CTLR)
return;
/*
@@ -38,10 +46,10 @@ void fsl_ddr_board_options(memctl_options_t *popts,
/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
* freqency and n_banks specified in board_specific_parameters table.
*/
- ddr_freq = get_ddr_freq(0) / 1000000;
+ ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
while (pbsp->datarate_mhz_high) {
- if (pbsp->n_ranks == pdimm->n_ranks &&
- (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
+ if (pbsp->n_ranks == pdimm[slot].n_ranks &&
+ (pdimm[slot].rank_density >> 30) >= pbsp->rank_gb) {
if (ddr_freq <= pbsp->datarate_mhz_high) {
popts->clk_adjust = pbsp->clk_adjust;
popts->wrlvl_start = pbsp->wrlvl_start;
@@ -78,17 +86,41 @@ found:
popts->otf_burst_chop_en = 0;
popts->burst_length = DDR_BL8;
popts->bstopre = 0; /* enable auto precharge */
+ /*
+ * Layout optimization results byte mapping
+ * Byte 0 -> Byte ECC
+ * Byte 1 -> Byte 3
+ * Byte 2 -> Byte 2
+ * Byte 3 -> Byte 1
+ * Byte ECC -> Byte 0
+ */
+ dq_mapping_0 = pdimm[slot].dq_mapping[0];
+ dq_mapping_2 = pdimm[slot].dq_mapping[2];
+ dq_mapping_3 = pdimm[slot].dq_mapping[3];
+ pdimm[slot].dq_mapping[0] = pdimm[slot].dq_mapping[8];
+ pdimm[slot].dq_mapping[1] = pdimm[slot].dq_mapping[9];
+ pdimm[slot].dq_mapping[2] = pdimm[slot].dq_mapping[6];
+ pdimm[slot].dq_mapping[3] = pdimm[slot].dq_mapping[7];
+ pdimm[slot].dq_mapping[6] = dq_mapping_2;
+ pdimm[slot].dq_mapping[7] = dq_mapping_3;
+ pdimm[slot].dq_mapping[8] = dq_mapping_0;
+ pdimm[slot].dq_mapping[9] = 0;
+ pdimm[slot].dq_mapping[10] = 0;
+ pdimm[slot].dq_mapping[11] = 0;
+ pdimm[slot].dq_mapping[12] = 0;
+ pdimm[slot].dq_mapping[13] = 0;
+ pdimm[slot].dq_mapping[14] = 0;
+ pdimm[slot].dq_mapping[15] = 0;
+ pdimm[slot].dq_mapping[16] = 0;
+ pdimm[slot].dq_mapping[17] = 0;
}
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
- */
- popts->half_strength_driver_enable = 1;
+ /* To work at higher than 1333MT/s */
+ popts->half_strength_driver_enable = 0;
/*
* Write leveling override
*/
popts->wrlvl_override = 1;
- popts->wrlvl_sample = 0xf;
+ popts->wrlvl_sample = 0x0; /* 32 clocks */
/*
* Rtt and Rtt_WR override
@@ -98,71 +130,25 @@ found:
/* Enable ZQ calibration */
popts->zq_en = 1;
-#ifdef CONFIG_SYS_FSL_DDR4
- popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
- popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) |
- DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */
-#else
- /* DHC_EN =1, ODT = 75 Ohm */
- popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
- popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
-#endif
-}
-
-#ifdef CONFIG_SYS_DDR_RAW_TIMING
-dimm_params_t ddr_raw_timing = {
- .n_ranks = 2,
- .rank_density = 1073741824u,
- .capacity = 2147483648,
- .primary_sdram_width = 64,
- .ec_sdram_width = 0,
- .registered_dimm = 0,
- .mirrored_dimm = 0,
- .n_row_addr = 14,
- .n_col_addr = 10,
- .n_banks_per_sdram_device = 8,
- .edc_config = 0,
- .burst_lengths_bitmask = 0x0c,
-
- .tckmin_x_ps = 937,
- .caslat_x = 0x6FC << 4, /* 14,13,11,10,9,8,7,6 */
- .taa_ps = 13090,
- .twr_ps = 15000,
- .trcd_ps = 13090,
- .trrd_ps = 5000,
- .trp_ps = 13090,
- .tras_ps = 33000,
- .trc_ps = 46090,
- .trfc_ps = 160000,
- .twtr_ps = 7500,
- .trtp_ps = 7500,
- .refresh_rate_ps = 7800000,
- .tfaw_ps = 25000,
-};
-
-int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
- unsigned int controller_number,
- unsigned int dimm_number)
-{
- const char dimm_model[] = "Fixed DDR on board";
-
- if (((controller_number == 0) && (dimm_number == 0)) ||
- ((controller_number == 1) && (dimm_number == 0))) {
- memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+ if (ddr_freq < 2350) {
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
+ DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
+ DDR_CDR2_VREF_RANGE_2;
+ } else {
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
+ DDR_CDR1_ODT(DDR_CDR_ODT_100ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_100ohm) |
+ DDR_CDR2_VREF_RANGE_2;
}
-
- return 0;
}
-#endif
+
phys_size_t initdram(int board_type)
{
phys_size_t dram_size;
- puts("Initializing DDR....");
+ puts("Initializing DDR....using SPD\n");
- puts("using SPD\n");
dram_size = fsl_ddr_sdram();
return dram_size;
diff --git a/board/freescale/ls2085a/ddr.h b/board/freescale/ls2085aqds/ddr.h
similarity index 63%
copy from board/freescale/ls2085a/ddr.h
copy to board/freescale/ls2085aqds/ddr.h
index 9958a68..b76ea61 100644
--- a/board/freescale/ls2085a/ddr.h
+++ b/board/freescale/ls2085aqds/ddr.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -28,8 +28,10 @@ static const struct board_specific_parameters udimm0[] = {
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl
* ranks| mhz| GB |adjst| start | ctl2 | ctl3
*/
- {2, 2140, 0, 4, 4, 0x0, 0x0},
- {1, 2140, 0, 4, 4, 0x0, 0x0},
+ {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,},
+ {2, 1666, 0, 4, 7, 0x08090A0C, 0x0D0F100B,},
+ {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,},
+ {2, 2300, 0, 4, 8, 0x090A0C0F, 0x1012130C,},
{}
};
@@ -40,8 +42,10 @@ static const struct board_specific_parameters udimm2[] = {
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl
* ranks| mhz| GB |adjst| start | ctl2 | ctl3
*/
- {2, 2140, 0, 4, 4, 0x0, 0x0},
- {1, 2140, 0, 4, 4, 0x0, 0x0},
+ {2, 1350, 0, 4, 0xd, 0x0C0A0A00, 0x00000009,},
+ {2, 1666, 0, 4, 0xd, 0x0C0A0A00, 0x00000009,},
+ {2, 1900, 0, 4, 0xe, 0x0D0C0B00, 0x0000000A,},
+ {2, 2200, 0, 4, 0xe, 0x0D0C0B00, 0x0000000A,},
{}
};
@@ -51,9 +55,10 @@ static const struct board_specific_parameters rdimm0[] = {
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl
* ranks| mhz| GB |adjst| start | ctl2 | ctl3
*/
- {4, 2140, 0, 5, 4, 0x0, 0x0},
- {2, 2140, 0, 5, 4, 0x0, 0x0},
- {1, 2140, 0, 4, 4, 0x0, 0x0},
+ {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,},
+ {2, 1666, 0, 4, 7, 0x08090A0C, 0x0D0F100B,},
+ {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,},
+ {2, 2200, 0, 4, 8, 0x090A0C0F, 0x1012130C,},
{}
};
@@ -64,9 +69,10 @@ static const struct board_specific_parameters rdimm2[] = {
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl
* ranks| mhz| GB |adjst| start | ctl2 | ctl3
*/
- {4, 2140, 0, 5, 4, 0x0, 0x0},
- {2, 2140, 0, 5, 4, 0x0, 0x0},
- {1, 2140, 0, 4, 4, 0x0, 0x0},
+ {2, 1350, 0, 4, 6, 0x0708090B, 0x0C0D0E09,},
+ {2, 1666, 0, 4, 7, 0x0B0A090C, 0x0D0F100B,},
+ {2, 1900, 0, 4, 7, 0x09090B0D, 0x0E10120B,},
+ {2, 2200, 0, 4, 8, 0x090A0C0F, 0x1012130C,},
{}
};
diff --git a/board/freescale/ls2085aqds/ls2085aqds.c b/board/freescale/ls2085aqds/ls2085aqds.c
new file mode 100644
index 0000000..f7ed5b9
--- /dev/null
+++ b/board/freescale/ls2085aqds/ls2085aqds.c
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <fsl_ifc.h>
+#include <fsl_ddr.h>
+#include <asm/io.h>
+#include <fdt_support.h>
+#include <libfdt.h>
+#include <fsl_debug_server.h>
+#include <fsl-mc/fsl_mc.h>
+#include <environment.h>
+#include <i2c.h>
+#include <asm/arch-fsl-lsch3/soc.h>
+
+#include "../common/qixis.h"
+#include "ls2085aqds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned long long get_qixis_addr(void)
+{
+ unsigned long long addr;
+
+ if (gd->flags & GD_FLG_RELOC)
+ addr = QIXIS_BASE_PHYS;
+ else
+ addr = QIXIS_BASE_PHYS_EARLY;
+
+ /*
+ * IFC address under 256MB is mapped to 0x30000000, any address above
+ * is mapped to 0x5_10000000 up to 4GB.
+ */
+ addr = addr > 0x10000000 ? addr + 0x500000000ULL : addr + 0x30000000;
+
+ return addr;
+}
+
+int checkboard(void)
+{
+ char buf[64];
+ u8 sw;
+ static const char *const freq[] = {"100", "125", "156.25",
+ "100 separate SSCG"};
+ int clock;
+
+ sw = QIXIS_READ(arch);
+ printf("Board: %s, ", CONFIG_IDENT_STRING);
+ printf("Board Arch: V%d, ", sw >> 4);
+ printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1);
+
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+ if (sw < 0x8)
+ printf("vBank: %d\n", sw);
+ else if (sw == 0x8)
+ puts("PromJet\n");
+ else if (sw == 0x9)
+ puts("NAND\n");
+ else if (sw == 0x15)
+ printf("IFCCard\n");
+ else
+ printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+
+ printf("FPGA: v%d (%s), build %d",
+ (int)QIXIS_READ(scver), qixis_read_tag(buf),
+ (int)qixis_read_minor());
+ /* the timestamp string contains "\n" at the end */
+ printf(" on %s", qixis_read_time(buf));
+
+ /*
+ * Display the actual SERDES reference clocks as configured by the
+ * dip switches on the board. Note that the SWx registers could
+ * technically be set to force the reference clocks to match the
+ * values that the SERDES expects (or vice versa). For now, however,
+ * we just display both values and hope the user notices when they
+ * don't match.
+ */
+ puts("SERDES1 Reference : ");
+ sw = QIXIS_READ(brdcfg[2]);
+ clock = (sw >> 6) & 3;
+ printf("Clock1 = %sMHz ", freq[clock]);
+ clock = (sw >> 4) & 3;
+ printf("Clock2 = %sMHz", freq[clock]);
+
+ puts("\nSERDES2 Reference : ");
+ clock = (sw >> 2) & 3;
+ printf("Clock1 = %sMHz ", freq[clock]);
+ clock = (sw >> 0) & 3;
+ printf("Clock2 = %sMHz\n", freq[clock]);
+
+ return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch (sysclk_conf & 0x0F) {
+ case QIXIS_SYSCLK_83:
+ return 83333333;
+ case QIXIS_SYSCLK_100:
+ return 100000000;
+ case QIXIS_SYSCLK_125:
+ return 125000000;
+ case QIXIS_SYSCLK_133:
+ return 133333333;
+ case QIXIS_SYSCLK_150:
+ return 150000000;
+ case QIXIS_SYSCLK_160:
+ return 160000000;
+ case QIXIS_SYSCLK_166:
+ return 166666666;
+ }
+ return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch ((ddrclk_conf & 0x30) >> 4) {
+ case QIXIS_DDRCLK_100:
+ return 100000000;
+ case QIXIS_DDRCLK_125:
+ return 125000000;
+ case QIXIS_DDRCLK_133:
+ return 133333333;
+ }
+ return 66666666;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+ int ret;
+
+ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+ if (ret) {
+ puts("PCA: failed to select proper channel\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+int board_init(void)
+{
+ init_final_memctl_regs();
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+ gd->env_addr = (ulong)&default_environment[0];
+#endif
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ fsl_lsch3_early_init_f();
+ return 0;
+}
+
+void detail_board_ddr_info(void)
+{
+ puts("\nDDR ");
+ print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
+ print_ddr_info(0);
+ if (gd->bd->bi_dram[2].size) {
+ puts("\nDP-DDR ");
+ print_size(gd->bd->bi_dram[2].size, "");
+ print_ddr_info(CONFIG_DP_DDR_CTRL);
+ }
+}
+
+int dram_init(void)
+{
+ gd->ram_size = initdram(0);
+
+ return 0;
+}
+
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+#ifdef CONFIG_FSL_DEBUG_SERVER
+ debug_server_init();
+#endif
+
+ return 0;
+}
+#endif
+
+unsigned long get_dram_size_to_hide(void)
+{
+ unsigned long dram_to_hide = 0;
+
+/* Carve the Debug Server private DRAM block from the end of DRAM */
+#ifdef CONFIG_FSL_DEBUG_SERVER
+ dram_to_hide += debug_server_get_dram_block_size();
+#endif
+
+/* Carve the MC private DRAM block from the end of DRAM */
+#ifdef CONFIG_FSL_MC_ENET
+ dram_to_hide += mc_get_dram_block_size();
+#endif
+
+ return dram_to_hide;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int error = 0;
+
+#ifdef CONFIG_FSL_MC_ENET
+ error = cpu_eth_init(bis);
+#endif
+
+ error = pci_eth_init(bis);
+
+ return error;
+}
+
+#ifdef CONFIG_FSL_MC_ENET
+void fdt_fixup_board_enet(void *fdt)
+{
+ int offset;
+
+ offset = fdt_path_offset(fdt, "/fsl-mc");
+
+ if (offset < 0)
+ offset = fdt_path_offset(fdt, "/fsl,dprc at 0");
+
+ if (offset < 0) {
+ printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
+ __func__, offset);
+ return;
+ }
+
+ if (get_mc_boot_status() == 0)
+ fdt_status_okay(fdt, offset);
+ else
+ fdt_status_fail(fdt, offset);
+}
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ phys_addr_t base;
+ phys_size_t size;
+
+ ft_cpu_setup(blob, bd);
+
+ /* limit the memory size to bank 1 until Linux can handle 40-bit PA */
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_FSL_MC_ENET
+ fdt_fixup_board_enet(blob);
+ fsl_mc_ldpaa_exit(bd);
+#endif
+
+ return 0;
+}
+#endif
+
+void qixis_dump_switch(void)
+{
+ int i, nr_of_cfgsw;
+
+ QIXIS_WRITE(cms[0], 0x00);
+ nr_of_cfgsw = QIXIS_READ(cms[1]);
+
+ puts("DIP switch settings dump:\n");
+ for (i = 1; i <= nr_of_cfgsw; i++) {
+ QIXIS_WRITE(cms[0], i);
+ printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
+ }
+}
diff --git a/board/freescale/ls1021aqds/ls1021aqds_qixis.h b/board/freescale/ls2085aqds/ls2085aqds_qixis.h
similarity index 53%
copy from board/freescale/ls1021aqds/ls1021aqds_qixis.h
copy to board/freescale/ls2085aqds/ls2085aqds_qixis.h
index 8e482eb..bb43e65 100644
--- a/board/freescale/ls1021aqds/ls1021aqds_qixis.h
+++ b/board/freescale/ls2085aqds/ls2085aqds_qixis.h
@@ -1,17 +1,11 @@
/*
- * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __LS1021AQDS_QIXIS_H__
-#define __LS1021AQDS_QIXIS_H__
-
-/* Definitions of QIXIS Registers for LS1021AQDS */
-
-/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
-#define BRDCFG4_EMISEL_MASK 0xe0
-#define BRDCFG4_EMISEL_SHIFT 5
+#ifndef __LS2_QDS_QIXIS_H__
+#define __LS2_QDS_QIXIS_H__
/* SYSCLK */
#define QIXIS_SYSCLK_66 0x0
@@ -22,7 +16,6 @@
#define QIXIS_SYSCLK_150 0x5
#define QIXIS_SYSCLK_160 0x6
#define QIXIS_SYSCLK_166 0x7
-#define QIXIS_SYSCLK_64 0x8
/* DDRCLK */
#define QIXIS_DDRCLK_66 0x0
@@ -30,8 +23,4 @@
#define QIXIS_DDRCLK_125 0x2
#define QIXIS_DDRCLK_133 0x3
-#define QIXIS_SRDS1CLK_100 0x0
-
-#define QIXIS_DCU_BRDCFG5 0x55
-
-#endif
+#endif /*__LS2_QDS_QIXIS_H__*/
diff --git a/configs/ls1021aqds_ddr4_nor_defconfig b/configs/ls2085aqds_defconfig
similarity index 66%
copy from configs/ls1021aqds_ddr4_nor_defconfig
copy to configs/ls2085aqds_defconfig
index 3c57481..e3a17a3 100644
--- a/configs/ls1021aqds_ddr4_nor_defconfig
+++ b/configs/ls2085aqds_defconfig
@@ -1,3 +1,3 @@
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
CONFIG_ARM=y
-CONFIG_TARGET_LS1021AQDS=y
+CONFIG_TARGET_LS2085AQDS=y
diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
index c0e4314..95a5e56 100644
--- a/include/configs/ls2085a_common.h
+++ b/include/configs/ls2085a_common.h
@@ -92,7 +92,7 @@
#define CONFIG_SYS_I2C_MXC
/* Serial Port */
-#define CONFIG_CONS_INDEX 2
+#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
@@ -105,18 +105,35 @@
#define CONFIG_FSL_IFC
/*
- * During booting, CS0 needs to be at the region of 0x30000000, i.e. the IFC
- * address 0. But this region is limited to 256MB. To accommodate bigger NOR
- * flash and other devices, we will map CS0 to 0x580000000 after relocation.
+ * During booting, IFC is mapped at the region of 0x30000000.
+ * But this region is limited to 256MB. To accommodate NOR, promjet
+ * and FPGA. This region is divided as below:
+ * 0x30000000 - 0x37ffffff : 128MB : NOR flash
+ * 0x38000000 - 0x3BFFFFFF : 64MB : Promjet
+ * 0x3C000000 - 0x40000000 : 64MB : FPGA etc
+ *
+ * To accommodate bigger NOR flash and other devices, we will map IFC
+ * chip selects to as below:
+ * 0x5_1000_0000..0x5_1fff_ffff Memory Hole
+ * 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
+ * 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
+ * 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
+ * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
+ *
+ * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation.
* CONFIG_SYS_FLASH_BASE has the final address (core view)
* CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
* CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
* CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
*/
+
#define CONFIG_SYS_FLASH_BASE 0x580000000ULL
#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000
#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
+#define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000
+#define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000
+
#ifndef CONFIG_SYS_NO_FLASH
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
@@ -124,8 +141,15 @@
#define CONFIG_SYS_FLASH_QUIET_TEST
#endif
-#define CONFIG_SYS_NAND_BASE 0x520000000
-#define CONFIG_SYS_NAND_BASE_PHYS 0x20000000
+#ifndef __ASSEMBLY__
+unsigned long long get_qixis_addr(void);
+#endif
+#define QIXIS_BASE get_qixis_addr()
+#define QIXIS_BASE_PHYS 0x20000000
+#define QIXIS_BASE_PHYS_EARLY 0xC000000
+
+#define CONFIG_SYS_NAND_BASE 0x530000000ULL
+#define CONFIG_SYS_NAND_BASE_PHYS 0x30000000
/* Debug Server firmware */
#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024)
@@ -223,7 +247,7 @@
"hugepages=16"
#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \
"$kernel_size && bootm $kernel_load"
-#define CONFIG_BOOTDELAY 1
+#define CONFIG_BOOTDELAY 10
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
diff --git a/include/configs/ls2085aqds.h b/include/configs/ls2085aqds.h
new file mode 100644
index 0000000..70162e7
--- /dev/null
+++ b/include/configs/ls2085aqds.h
@@ -0,0 +1,283 @@
+/*
+ * Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS2_QDS_H
+#define __LS2_QDS_H
+
+#include "ls2085a_common.h"
+#include <config_cmd_default.h>
+
+#define CONFIG_IDENT_STRING " LS2085A-QDS"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.LS2085A-QDS"
+
+#define CONFIG_DISPLAY_BOARDINFO
+
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(void);
+unsigned long get_board_ddr_clk(void);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
+#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4)
+
+#define CONFIG_DDR_SPD
+#define CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#define SPD_EEPROM_ADDRESS1 0x51
+#define SPD_EEPROM_ADDRESS2 0x52
+#define SPD_EEPROM_ADDRESS3 0x53
+#define SPD_EEPROM_ADDRESS4 0x54
+#define SPD_EEPROM_ADDRESS5 0x55
+#define SPD_EEPROM_ADDRESS6 0x56 /* dummy address */
+#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1
+#define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */
+#define CONFIG_DIMM_SLOTS_PER_CTLR 2
+#define CONFIG_CHIP_SELECTS_PER_CTRL 4
+#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_FSL_DDR_BIST /* enable built-in memory test */
+
+/* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
+
+#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
+#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
+#define CONFIG_SYS_NOR_AMASK_EARLY IFC_AMASK(64*1024*1024)
+
+#define CONFIG_SYS_NOR0_CSPR \
+ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR0_CSPR_EARLY \
+ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR1_CSPR \
+ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR1_CSPR_EARLY \
+ (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12)
+#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
+ FTIM0_NOR_TEADC(0x5) | \
+ FTIM0_NOR_TEAHC(0x5))
+#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
+ FTIM1_NOR_TRAD_NOR(0x1a) |\
+ FTIM1_NOR_TSEQRAD_NOR(0x13))
+#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
+ FTIM2_NOR_TCH(0x4) | \
+ FTIM2_NOR_TWPH(0x0E) | \
+ FTIM2_NOR_TWP(0x1c))
+#define CONFIG_SYS_NOR_FTIM3 0x04000000
+#define CONFIG_SYS_IFC_CCR 0x01000000
+
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\
+ CONFIG_SYS_FLASH_BASE + 0x40000000}
+#endif
+
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_MAX_ECCPOS 256
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
+
+
+#define CONFIG_SYS_NAND_CSPR_EXT (0x0)
+#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
+ | CSPR_MSEL_NAND /* MSEL = NAND */ \
+ | CSPR_V)
+#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024)
+
+#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
+ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
+ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
+ | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \
+ | CSOR_NAND_PGS_2K /* Page Size = 2K */ \
+ | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
+ | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* ONFI NAND Flash mode0 Timing Params */
+#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
+ FTIM0_NAND_TWP(0x18) | \
+ FTIM0_NAND_TWCHT(0x07) | \
+ FTIM0_NAND_TWH(0x0a))
+#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
+ FTIM1_NAND_TWBE(0x39) | \
+ FTIM1_NAND_TRR(0x0e) | \
+ FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
+ FTIM2_NAND_TREH(0x0a) | \
+ FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3 0x0
+
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+
+#define CONFIG_FSL_QIXIS /* use common QIXIS code */
+#define QIXIS_LBMAP_SWITCH 0x06
+#define QIXIS_LBMAP_MASK 0x0f
+#define QIXIS_LBMAP_SHIFT 0
+#define QIXIS_LBMAP_DFLTBANK 0x00
+#define QIXIS_LBMAP_ALTBANK 0x04
+#define QIXIS_RST_CTL_RESET 0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_RST_FORCE_MEM 0x01
+
+#define CONFIG_SYS_CSPR3_EXT (0x0)
+#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_GPCM \
+ | CSPR_V)
+#define CONFIG_SYS_CSPR3_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_GPCM \
+ | CSPR_V)
+
+#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024)
+#define CONFIG_SYS_CSOR3 CSOR_GPCM_ADM_SHIFT(12)
+/* QIXIS Timing parameters for IFC CS3 */
+#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
+ FTIM0_GPCM_TEADC(0x0e) | \
+ FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
+ FTIM1_GPCM_TRAD(0x3f))
+#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
+ FTIM2_GPCM_TCH(0xf) | \
+ FTIM2_GPCM_TWP(0x3E))
+#define CONFIG_SYS_CS3_FTIM3 0x0
+
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY
+#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR_EARLY
+#define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK_EARLY
+#define CONFIG_SYS_AMASK1_FINAL CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
+
+/* Debug Server firmware */
+#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
+#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL
+
+/* MC firmware */
+#define CONFIG_SYS_LS_MC_FW_IN_NOR
+#define CONFIG_SYS_LS_MC_FW_ADDR 0x580300000ULL
+
+#define CONFIG_SYS_LS_MC_DPL_IN_NOR
+#define CONFIG_SYS_LS_MC_DPL_ADDR 0x580700000ULL
+
+#define CONFIG_SYS_LS_MC_DPC_IN_NOR
+#define CONFIG_SYS_LS_MC_DPC_ADDR 0x580800000ULL
+
+#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
+
+/*
+ * I2C
+ */
+#define I2C_MUX_PCA_ADDR 0x77
+#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/
+
+/* I2C bus multiplexer */
+#define I2C_MUX_CH_DEFAULT 0x8
+
+/*
+ * RTC configuration
+ */
+#define RTC
+#define CONFIG_RTC_DS3231 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_CMD_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE 0x2000
+
+#define CONFIG_FSL_MEMAC
+#define CONFIG_PCI /* Enable PCIE */
+#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
+
+#ifdef CONFIG_PCI
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP
+#define CONFIG_E1000
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#endif
+
+
+
+/* Initial environment variables */
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "loadaddr=0x80100000\0" \
+ "kernel_addr=0x100000\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x581100000\0" \
+ "kernel_load=0xa0000000\0" \
+ "kernel_size=0x1000000\0"
+
+#endif /* __LS2_QDS_H */
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index 6358b6f..e5b6e03 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -167,6 +167,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
#define DDR_CDR2_VREF_OVRD(x) (0x00008080 | ((((x) - 37) & 0x3F) << 8))
#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
+#define DDR_CDR2_VREF_RANGE_2 0x00000040
#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
--
1.7.9.5
More information about the U-Boot
mailing list