[U-Boot] [PATCH 26/28] armv8/ls2085ardb: Enable NAND SPL support

York Sun yorksun at freescale.com
Thu Mar 19 17:45:57 CET 2015


From: Scott Wood <scottwood at freescale.com>

Enable NAND boot support using SPL framework. To boot from
NAND, either use DIP switches on board, or "qixis_reset nand"
command.

Signed-off-by: Scott Wood <scottwood at freescale.com>
---
 arch/arm/Kconfig                  |    1 +
 board/freescale/ls2085ardb/ddr.c  |    4 ++++
 configs/ls2085ardb_nand_defconfig |    4 ++++
 include/configs/ls2085ardb.h      |   40 ++++++++++++++++++++++++++++++++-----
 4 files changed, 44 insertions(+), 5 deletions(-)
 create mode 100644 configs/ls2085ardb_nand_defconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 46a48a0..7cbbf37 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -663,6 +663,7 @@ config TARGET_LS2085ARDB
 	bool "Support ls2085ardb"
 	select ARM64
 	select ARMV8_MULTIENTRY
+	select SUPPORT_SPL
 	help
 	  Support for Freescale LS2085ARDB platform.
 	  The LS2080A Reference design board (RDB) is a high-performance
diff --git a/board/freescale/ls2085ardb/ddr.c b/board/freescale/ls2085ardb/ddr.c
index 6cd5e8b..8d71ae1 100644
--- a/board/freescale/ls2085ardb/ddr.c
+++ b/board/freescale/ls2085ardb/ddr.c
@@ -147,9 +147,13 @@ phys_size_t initdram(int board_type)
 {
 	phys_size_t dram_size;
 
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+	return fsl_ddr_sdram_size();
+#else
 	puts("Initializing DDR....using SPD\n");
 
 	dram_size = fsl_ddr_sdram();
+#endif
 
 	return dram_size;
 }
diff --git a/configs/ls2085ardb_nand_defconfig b/configs/ls2085ardb_nand_defconfig
new file mode 100644
index 0000000..39ba8c5
--- /dev/null
+++ b/configs/ls2085ardb_nand_defconfig
@@ -0,0 +1,4 @@
++S:CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND"
++S:CONFIG_SPL=y
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_LS2085ARDB=y
diff --git a/include/configs/ls2085ardb.h b/include/configs/ls2085ardb.h
index 24400e4..34aa3e5 100644
--- a/include/configs/ls2085ardb.h
+++ b/include/configs/ls2085ardb.h
@@ -139,11 +139,13 @@ unsigned long get_board_sys_clk(void);
 #define QIXIS_LBMAP_SHIFT		0
 #define QIXIS_LBMAP_DFLTBANK		0x00
 #define QIXIS_LBMAP_ALTBANK		0x04
+#define QIXIS_LBMAP_NAND		0x09
 #define QIXIS_RST_CTL_RESET		0x31
 #define QIXIS_RST_CTL_RESET_EN		0x30
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+#define QIXIS_RCW_SRC_NAND		0x119
 #define	QIXIS_RST_FORCE_MEM		0x01
 
 #define CONFIG_SYS_CSPR3_EXT	(0x0)
@@ -169,6 +171,33 @@ unsigned long get_board_sys_clk(void);
 					FTIM2_GPCM_TWP(0x3E))
 #define CONFIG_SYS_CS3_FTIM3		0x0
 
+#if defined(CONFIG_SPL) && defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR0_CSPR_EARLY
+#define CONFIG_SYS_CSPR2_FINAL		CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
+
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		(1536 * 1024)
+#define CONFIG_ENV_SECT_SIZE		0x20000
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_SPL_PAD_TO		0x7ff40
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(512 * 1024)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(512 * 1024)
+#else
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
 #define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
@@ -187,6 +216,12 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
 
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_SECT_SIZE		0x20000
+#define CONFIG_ENV_SIZE			0x2000
+#endif
+
 /* Debug Server firmware */
 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580D00000ULL
@@ -232,11 +267,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x200000)
-#define CONFIG_ENV_SECT_SIZE		0x20000
-#define CONFIG_ENV_SIZE			0x2000
-
 #define CONFIG_FSL_MEMAC
 #define CONFIG_PCI		/* Enable PCIE */
 #define CONFIG_PCIE_LAYERSCAPE	/* Use common FSL Layerscape PCIe code */
-- 
1.7.9.5



More information about the U-Boot mailing list