[U-Boot] [PATCH 17/28] armv8/fsl-lsch3: Enable system error aborts

Mark Rutland mark.rutland at arm.com
Thu Mar 19 19:14:33 CET 2015


On Thu, Mar 19, 2015 at 04:45:48PM +0000, York Sun wrote:
> From: Scott Wood <scottwood at freescale.com>
> 
> This lets us see the problems (close to) when they happen,
> rather than Linux hanging when it enables them prior to having a
> working console.

FYI, if the Linux driver for your UART supports earlycon, that should
work since commit 7a9c43bed891d1f8 ("setup: Move unmask of async
interrupts after possible earlycon setup").

I hope that SError is masked again prior to entering Linux, as required
by the boot protocol?

Mark.

> Signed-off-by: Scott Wood <scottwood at freescale.com>
> ---
>  arch/arm/cpu/armv8/fsl-lsch3/cpu.c |    4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
> index 07064a3..22b5fb2 100644
> --- a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
> +++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
> @@ -263,6 +263,10 @@ int arch_cpu_init(void)
>  	__asm_invalidate_tlb_all();
>  	early_mmu_setup();
>  	set_sctlr(get_sctlr() | CR_C);
> +
> +	/* Enable system error aborts */
> +	asm volatile("msr daifclr, #4" : : : "memory");
> +
>  	return 0;
>  }
>  
> -- 
> 1.7.9.5
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 


More information about the U-Boot mailing list