[U-Boot] [PATCH 3/4] net: Add Intel Topcliff GMAC driver
Bin Meng
bmeng.cn at gmail.com
Fri Mar 20 10:12:20 CET 2015
Add a new driver for the Gigabit Ethernet MAC found on Intel Topcliff
Platform Controller Hub. Tested under 10/100 half/full duplex and 1000
full duplex modes using ping and tftpboot commands.
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
---
drivers/net/Makefile | 1 +
drivers/net/pch_gbe.c | 466 ++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/pch_gbe.h | 300 ++++++++++++++++++++++++++++++++
include/netdev.h | 4 +
4 files changed, 771 insertions(+)
create mode 100644 drivers/net/pch_gbe.c
create mode 100644 drivers/net/pch_gbe.h
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 46c4ac6..66c35fa 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
obj-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-$(CONFIG_NS8382X) += ns8382x.o
+obj-$(CONFIG_PCH_GBE) += pch_gbe.o
obj-$(CONFIG_PCNET) += pcnet.o
obj-$(CONFIG_RTL8139) += rtl8139.o
obj-$(CONFIG_RTL8169) += rtl8169.o
diff --git a/drivers/net/pch_gbe.c b/drivers/net/pch_gbe.c
new file mode 100644
index 0000000..976848d
--- /dev/null
+++ b/drivers/net/pch_gbe.c
@@ -0,0 +1,466 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * Intel Platform Controller Hub EG20T (codename Topcliff) GMAC Driver
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include "pch_gbe.h"
+
+#if !defined(CONFIG_PHYLIB)
+# error "PCH Gigabit Ethernet driver requires PHYLIB - missing CONFIG_PHYLIB"
+#endif
+
+static struct pci_device_id supported[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_GBE },
+ { }
+};
+
+static void pch_gbe_mac_read(struct pch_gbe_regs *mac_regs, u8 *addr)
+{
+ u32 macid_hi, macid_lo;
+
+ macid_hi = readl(&mac_regs->mac_adr[0].high);
+ macid_lo = readl(&mac_regs->mac_adr[0].low) & 0xffff;
+ debug("pch_gbe: macid_hi %#x macid_lo %#x\n", macid_hi, macid_lo);
+
+ addr[0] = (u8)(macid_hi & 0xff);
+ addr[1] = (u8)((macid_hi >> 8) & 0xff);
+ addr[2] = (u8)((macid_hi >> 16) & 0xff);
+ addr[3] = (u8)((macid_hi >> 24) & 0xff);
+ addr[4] = (u8)(macid_lo & 0xff);
+ addr[5] = (u8)((macid_lo >> 8) & 0xff);
+}
+
+static int pch_gbe_mac_write(struct pch_gbe_regs *mac_regs, u8 *addr)
+{
+ u32 macid_hi, macid_lo;
+ ulong start;
+
+ macid_hi = addr[0] + (addr[1] << 8) + (addr[2] << 16) + (addr[3] << 24);
+ macid_lo = addr[4] + (addr[5] << 8);
+
+ writel(macid_hi, &mac_regs->mac_adr[0].high);
+ writel(macid_lo, &mac_regs->mac_adr[0].low);
+ writel(0xfffe, &mac_regs->addr_mask);
+
+ start = get_timer(0);
+ while (get_timer(start) < PCH_GBE_TIMEOUT) {
+ if (!(readl(&mac_regs->addr_mask) & PCH_GBE_BUSY))
+ return 0;
+
+ udelay(10);
+ }
+
+ return -ETIME;
+}
+
+static int pch_gbe_reset(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+ ulong start;
+
+ priv->rx_idx = 0;
+ priv->tx_idx = 0;
+
+ writel(PCH_GBE_ALL_RST, &mac_regs->reset);
+
+ /*
+ * Configure the MAC to RGMII mode after reset
+ *
+ * For some unknown reason, we must do the configuration here right
+ * after resetting the whole MAC, otherwise the reset bit in the RESET
+ * register will never be cleared by the hardware. And there is another
+ * way of having the same magic, that is to configure the MODE register
+ * to have the MAC work in MII/GMII mode, which is how current Linux
+ * pch_gbe driver does. Since anyway we need program the MAC to RGMII
+ * mode in the driver, we just do it here.
+ *
+ * Note: this behavior is not documented in the hardware manual.
+ */
+ writel(PCH_GBE_RGMII_MODE_RGMII | PCH_GBE_CHIP_TYPE_INTERNAL,
+ &mac_regs->rgmii_ctrl);
+
+ start = get_timer(0);
+ while (get_timer(start) < PCH_GBE_TIMEOUT) {
+ if (!(readl(&mac_regs->reset) & PCH_GBE_ALL_RST)) {
+ /*
+ * Soft reset clears hardware MAC address registers,
+ * so we have to reload MAC address here in order to
+ * make linux pch_gbe driver happy.
+ */
+ return pch_gbe_mac_write(mac_regs, dev->enetaddr);
+ }
+
+ udelay(10);
+ }
+
+ debug("pch_gbe: reset timeout\n");
+ return -ETIME;
+}
+
+static void pch_gbe_rx_descs_init(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+ struct pch_gbe_rx_desc *rx_desc = &priv->rx_desc[0];
+ int i;
+
+ memset(rx_desc, 0, sizeof(struct pch_gbe_rx_desc) * PCH_GBE_DESC_NUM);
+ for (i = 0; i < PCH_GBE_DESC_NUM; i++)
+ rx_desc->buffer_addr = pci_phys_to_mem(priv->bdf,
+ (u32)(priv->rx_buff[i]));
+
+ writel(pci_phys_to_mem(priv->bdf, (u32)rx_desc),
+ &mac_regs->rx_dsc_base);
+ writel(sizeof(struct pch_gbe_rx_desc) * (PCH_GBE_DESC_NUM - 1),
+ &mac_regs->rx_dsc_size);
+
+ writel(pci_phys_to_mem(priv->bdf, (u32)(rx_desc + 1)),
+ &mac_regs->rx_dsc_sw_p);
+}
+
+static void pch_gbe_tx_descs_init(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+ struct pch_gbe_tx_desc *tx_desc = &priv->tx_desc[0];
+
+ memset(tx_desc, 0, sizeof(struct pch_gbe_tx_desc) * PCH_GBE_DESC_NUM);
+
+ writel(pci_phys_to_mem(priv->bdf, (u32)tx_desc),
+ &mac_regs->tx_dsc_base);
+ writel(sizeof(struct pch_gbe_tx_desc) * (PCH_GBE_DESC_NUM - 1),
+ &mac_regs->tx_dsc_size);
+ writel(pci_phys_to_mem(priv->bdf, (u32)(tx_desc + 1)),
+ &mac_regs->tx_dsc_sw_p);
+}
+
+static void pch_gbe_adjust_link(struct pch_gbe_regs *mac_regs,
+ struct phy_device *phydev)
+{
+ if (!phydev->link) {
+ printf("%s: No link.\n", phydev->dev->name);
+ return;
+ }
+
+ clrbits_le32(&mac_regs->rgmii_ctrl,
+ PCH_GBE_RGMII_RATE_2_5M | PCH_GBE_CRS_SEL);
+ clrbits_le32(&mac_regs->mode,
+ PCH_GBE_MODE_GMII_ETHER | PCH_GBE_MODE_FULL_DUPLEX);
+
+ switch (phydev->speed) {
+ case 1000:
+ setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_125M);
+ setbits_le32(&mac_regs->mode, PCH_GBE_MODE_GMII_ETHER);
+ break;
+ case 100:
+ setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_25M);
+ setbits_le32(&mac_regs->mode, PCH_GBE_MODE_MII_ETHER);
+ break;
+ case 10:
+ setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_2_5M);
+ setbits_le32(&mac_regs->mode, PCH_GBE_MODE_MII_ETHER);
+ break;
+ }
+
+ if (phydev->duplex) {
+ setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_CRS_SEL);
+ setbits_le32(&mac_regs->mode, PCH_GBE_MODE_FULL_DUPLEX);
+ }
+
+ printf("Speed: %d, %s duplex\n", phydev->speed,
+ (phydev->duplex) ? "full" : "half");
+
+ return;
+}
+
+static int pch_gbe_init(struct eth_device *dev, bd_t *bis)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+
+ if (pch_gbe_reset(dev))
+ return -1;
+
+ pch_gbe_rx_descs_init(dev);
+ pch_gbe_tx_descs_init(dev);
+
+ /* Enable frame bursting */
+ writel(PCH_GBE_MODE_FR_BST, &mac_regs->mode);
+ /* Disable TCP/IP accelerator */
+ writel(PCH_GBE_RX_TCPIPACC_OFF, &mac_regs->tcpip_acc);
+ /* Disable RX flow control */
+ writel(0, &mac_regs->rx_fctrl);
+ /* Configure RX/TX mode */
+ writel(PCH_GBE_RH_ALM_EMP_16 | PCH_GBE_RH_ALM_FULL_16 |
+ PCH_GBE_RH_RD_TRG_32, &mac_regs->rx_mode);
+ writel(PCH_GBE_TM_TH_TX_STRT_32 | PCH_GBE_TM_TH_ALM_EMP_16 |
+ PCH_GBE_TM_TH_ALM_FULL_32 | PCH_GBE_TM_ST_AND_FD |
+ PCH_GBE_TM_SHORT_PKT, &mac_regs->tx_mode);
+
+ /* Start up the PHY */
+ if (phy_startup(priv->phydev)) {
+ printf("Could not initialize PHY %s\n",
+ priv->phydev->dev->name);
+ return -1;
+ }
+
+ pch_gbe_adjust_link(mac_regs, priv->phydev);
+
+ if (!priv->phydev->link)
+ return -1;
+
+ /* Enable TX & RX */
+ writel(PCH_GBE_RX_DMA_EN | PCH_GBE_TX_DMA_EN, &mac_regs->dma_ctrl);
+ writel(PCH_GBE_MRE_MAC_RX_EN, &mac_regs->mac_rx_en);
+
+ return 0;
+}
+
+static void pch_gbe_halt(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+
+ pch_gbe_reset(dev);
+
+ phy_shutdown(priv->phydev);
+}
+
+static int pch_gbe_send(struct eth_device *dev, void *packet, int length)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+ struct pch_gbe_tx_desc *tx_head, *tx_desc;
+ u16 frame_ctrl = 0;
+ u32 int_st;
+ ulong start;
+
+ tx_head = &priv->tx_desc[0];
+ tx_desc = &priv->tx_desc[priv->tx_idx];
+
+ if (length < 64)
+ frame_ctrl |= PCH_GBE_TXD_CTRL_APAD;
+
+ tx_desc->buffer_addr = pci_phys_to_mem(priv->bdf, (u32)packet);
+ tx_desc->length = length;
+ tx_desc->tx_words_eob = length + 3;
+ tx_desc->tx_frame_ctrl = frame_ctrl;
+ tx_desc->dma_status = 0;
+ tx_desc->gbec_status = 0;
+
+ /* Test the wrap-around condition */
+ if (++priv->tx_idx >= PCH_GBE_DESC_NUM)
+ priv->tx_idx = 0;
+
+ writel(pci_phys_to_mem(priv->bdf, (u32)(tx_head + priv->tx_idx)),
+ &mac_regs->tx_dsc_sw_p);
+
+ start = get_timer(0);
+ while (get_timer(start) < PCH_GBE_TIMEOUT) {
+ int_st = readl(&mac_regs->int_st);
+ if (int_st & PCH_GBE_INT_TX_CMPLT)
+ return 0;
+
+ udelay(10);
+ }
+
+ debug("pch_gbe: sent failed\n");
+ return -ETIME;
+}
+
+static int pch_gbe_recv(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct pch_gbe_regs *mac_regs = priv->mac_regs;
+ struct pch_gbe_rx_desc *rx_head, *rx_desc;
+ u32 hw_desc, buffer_addr, length;
+ int rx_swp;
+
+ rx_head = &priv->rx_desc[0];
+ rx_desc = &priv->rx_desc[priv->rx_idx];
+
+ readl(&mac_regs->int_st);
+ hw_desc = readl(&mac_regs->rx_dsc_hw_p_hld);
+
+ /* Just return if not receiving any packet */
+ if ((u32)rx_desc == hw_desc)
+ return 0;
+
+ buffer_addr = pci_mem_to_phys(priv->bdf, rx_desc->buffer_addr);
+ length = rx_desc->rx_words_eob - 3 - ETH_FCS_LEN;
+ NetReceive((uchar *)buffer_addr, length);
+
+ /* Test the wrap-around condition */
+ if (++priv->rx_idx >= PCH_GBE_DESC_NUM)
+ priv->rx_idx = 0;
+ rx_swp = priv->rx_idx;
+ if (++rx_swp >= PCH_GBE_DESC_NUM)
+ rx_swp = 0;
+
+ writel(pci_phys_to_mem(priv->bdf, (u32)(rx_head + rx_swp)),
+ &mac_regs->rx_dsc_sw_p);
+
+ return length;
+}
+
+static int pch_gbe_mdio_ready(struct pch_gbe_regs *mac_regs)
+{
+ ulong start = get_timer(0);
+
+ while (get_timer(start) < PCH_GBE_TIMEOUT) {
+ if (readl(&mac_regs->miim) & PCH_GBE_MIIM_OPER_READY)
+ return 0;
+
+ udelay(10);
+ }
+
+ return -ETIME;
+}
+
+static int pch_gbe_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
+{
+ struct pch_gbe_regs *mac_regs = bus->priv;
+ u32 miim;
+
+ if (pch_gbe_mdio_ready(mac_regs))
+ return -ETIME;
+
+ miim = (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) |
+ (reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) |
+ PCH_GBE_MIIM_OPER_READ;
+ writel(miim, &mac_regs->miim);
+
+ if (pch_gbe_mdio_ready(mac_regs))
+ return -ETIME;
+
+ return readl(&mac_regs->miim) & 0xffff;
+}
+
+static int pch_gbe_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int reg, u16 val)
+{
+ struct pch_gbe_regs *mac_regs = bus->priv;
+ u32 miim;
+
+ if (pch_gbe_mdio_ready(mac_regs))
+ return -ETIME;
+
+ miim = (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) |
+ (reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) |
+ PCH_GBE_MIIM_OPER_WRITE | val;
+ writel(miim, &mac_regs->miim);
+
+ if (pch_gbe_mdio_ready(mac_regs))
+ return -ETIME;
+ else
+ return 0;
+}
+
+static int pch_gbe_mdio_init(char *name, struct pch_gbe_regs *mac_regs)
+{
+ struct mii_dev *bus;
+
+ bus = mdio_alloc();
+ if (!bus) {
+ debug("pch_gbe: failed to allocate MDIO bus\n");
+ return -ENOMEM;
+ }
+
+ bus->read = pch_gbe_mdio_read;
+ bus->write = pch_gbe_mdio_write;
+ sprintf(bus->name, name);
+
+ bus->priv = (void *)mac_regs;
+
+ return mdio_register(bus);
+}
+
+static int pch_gbe_phy_init(struct eth_device *dev)
+{
+ struct pch_gbe_priv *priv = dev->priv;
+ struct phy_device *phydev;
+ int mask = 0xffffffff;
+
+ phydev = phy_find_by_mask(priv->bus, mask, priv->interface);
+ if (!phydev) {
+ printf("pch_gbe: cannot find the phy\n");
+ return -1;
+ }
+
+ phy_connect_dev(phydev, dev);
+
+ phydev->supported &= PHY_GBIT_FEATURES;
+ phydev->advertising = phydev->supported;
+
+ priv->phydev = phydev;
+ phy_config(phydev);
+
+ return 1;
+}
+
+int pch_gbe_register(bd_t *bis)
+{
+ struct eth_device *dev;
+ struct pch_gbe_priv *priv;
+ pci_dev_t devno;
+ u32 iobase;
+
+ devno = pci_find_devices(supported, 0);
+ if (devno == -1)
+ return -ENODEV;
+
+ dev = (struct eth_device *)malloc(sizeof(*dev));
+ if (!dev)
+ return -ENOMEM;
+ memset(dev, 0, sizeof(*dev));
+
+ /*
+ * The priv structure contains the descriptors and frame buffers which
+ * need a strict buswidth alignment (64 bytes)
+ */
+ priv = (struct pch_gbe_priv *)memalign(PCH_GBE_ALIGN_SIZE,
+ sizeof(*priv));
+ if (!priv) {
+ free(dev);
+ return -ENOMEM;
+ }
+ memset(priv, 0, sizeof(*priv));
+
+ dev->priv = priv;
+ priv->dev = dev;
+ priv->bdf = devno;
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= PCI_BASE_ADDRESS_MEM_MASK;
+ iobase = pci_mem_to_phys(devno, iobase);
+
+ dev->iobase = iobase;
+ priv->mac_regs = (struct pch_gbe_regs *)iobase;
+
+ sprintf(dev->name, "pch_gbe.%x", iobase);
+
+ /* Read MAC address from SROM and initialize dev->enetaddr with it */
+ pch_gbe_mac_read(priv->mac_regs, dev->enetaddr);
+
+ dev->init = pch_gbe_init;
+ dev->halt = pch_gbe_halt;
+ dev->send = pch_gbe_send;
+ dev->recv = pch_gbe_recv;
+
+ eth_register(dev);
+
+ priv->interface = PHY_INTERFACE_MODE_RGMII;
+ pch_gbe_mdio_init(dev->name, priv->mac_regs);
+ priv->bus = miiphy_get_dev_by_name(dev->name);
+
+ return pch_gbe_phy_init(dev);
+}
diff --git a/drivers/net/pch_gbe.h b/drivers/net/pch_gbe.h
new file mode 100644
index 0000000..11329d4
--- /dev/null
+++ b/drivers/net/pch_gbe.h
@@ -0,0 +1,300 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * Intel Platform Controller Hub EG20T (codename Topcliff) GMAC Driver
+ * Adapted from linux drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _PCH_GBE_H_
+#define _PCH_GBE_H_
+
+#define PCH_GBE_TIMEOUT (3 * CONFIG_SYS_HZ)
+
+#define PCH_GBE_DESC_NUM 4
+#define PCH_GBE_ALIGN_SIZE 64
+
+/*
+ * Topcliff GBE MAC supports receiving ethernet frames with normal frame size
+ * (64-1518 bytes) as well as up to 10318 bytes, however it does not have a
+ * register bit to turn off receiving 'jumbo frame', so we have to allocate
+ * our own buffer to store the received frames instead of using U-Boot's own.
+ */
+#define PCH_GBE_RX_FRAME_LEN ROUND(10318, PCH_GBE_ALIGN_SIZE)
+
+/* Interrupt Status */
+/* Interrupt Status Hold */
+/* Interrupt Enable */
+#define PCH_GBE_INT_RX_DMA_CMPLT 0x00000001
+#define PCH_GBE_INT_RX_VALID 0x00000002
+#define PCH_GBE_INT_RX_FRAME_ERR 0x00000004
+#define PCH_GBE_INT_RX_FIFO_ERR 0x00000008
+#define PCH_GBE_INT_RX_DMA_ERR 0x00000010
+#define PCH_GBE_INT_RX_DSC_EMP 0x00000020
+#define PCH_GBE_INT_TX_CMPLT 0x00000100
+#define PCH_GBE_INT_TX_DMA_CMPLT 0x00000200
+#define PCH_GBE_INT_TX_FIFO_ERR 0x00000400
+#define PCH_GBE_INT_TX_DMA_ERR 0x00000800
+#define PCH_GBE_INT_PAUSE_CMPLT 0x00001000
+#define PCH_GBE_INT_MIIM_CMPLT 0x00010000
+#define PCH_GBE_INT_PHY_INT 0x00100000
+#define PCH_GBE_INT_WOL_DET 0x01000000
+#define PCH_GBE_INT_TCPIP_ERR 0x10000000
+
+/* Mode */
+#define PCH_GBE_MODE_MII_ETHER 0x00000000
+#define PCH_GBE_MODE_GMII_ETHER 0x80000000
+#define PCH_GBE_MODE_HALF_DUPLEX 0x00000000
+#define PCH_GBE_MODE_FULL_DUPLEX 0x40000000
+#define PCH_GBE_MODE_FR_BST 0x04000000
+
+/* Reset */
+#define PCH_GBE_ALL_RST 0x80000000
+#define PCH_GBE_TX_RST 0x00008000
+#define PCH_GBE_RX_RST 0x00004000
+
+/* TCP/IP Accelerator Control */
+#define PCH_GBE_EX_LIST_EN 0x00000008
+#define PCH_GBE_RX_TCPIPACC_OFF 0x00000004
+#define PCH_GBE_TX_TCPIPACC_EN 0x00000002
+#define PCH_GBE_RX_TCPIPACC_EN 0x00000001
+
+/* MAC RX Enable */
+#define PCH_GBE_MRE_MAC_RX_EN 0x00000001
+
+/* RX Flow Control */
+#define PCH_GBE_FL_CTRL_EN 0x80000000
+
+/* RX Mode */
+#define PCH_GBE_ADD_FIL_EN 0x80000000
+#define PCH_GBE_MLT_FIL_EN 0x40000000
+#define PCH_GBE_RH_ALM_EMP_4 0x00000000
+#define PCH_GBE_RH_ALM_EMP_8 0x00004000
+#define PCH_GBE_RH_ALM_EMP_16 0x00008000
+#define PCH_GBE_RH_ALM_EMP_32 0x0000c000
+#define PCH_GBE_RH_ALM_FULL_4 0x00000000
+#define PCH_GBE_RH_ALM_FULL_8 0x00001000
+#define PCH_GBE_RH_ALM_FULL_16 0x00002000
+#define PCH_GBE_RH_ALM_FULL_32 0x00003000
+#define PCH_GBE_RH_RD_TRG_4 0x00000000
+#define PCH_GBE_RH_RD_TRG_8 0x00000200
+#define PCH_GBE_RH_RD_TRG_16 0x00000400
+#define PCH_GBE_RH_RD_TRG_32 0x00000600
+#define PCH_GBE_RH_RD_TRG_64 0x00000800
+#define PCH_GBE_RH_RD_TRG_128 0x00000a00
+#define PCH_GBE_RH_RD_TRG_256 0x00000c00
+#define PCH_GBE_RH_RD_TRG_512 0x00000e00
+
+/* TX Mode */
+#define PCH_GBE_TM_NO_RTRY 0x80000000
+#define PCH_GBE_TM_LONG_PKT 0x40000000
+#define PCH_GBE_TM_ST_AND_FD 0x20000000
+#define PCH_GBE_TM_SHORT_PKT 0x10000000
+#define PCH_GBE_TM_LTCOL_RETX 0x08000000
+#define PCH_GBE_TM_TH_TX_STRT_4 0x00000000
+#define PCH_GBE_TM_TH_TX_STRT_8 0x00004000
+#define PCH_GBE_TM_TH_TX_STRT_16 0x00008000
+#define PCH_GBE_TM_TH_TX_STRT_32 0x0000c000
+#define PCH_GBE_TM_TH_ALM_EMP_4 0x00000000
+#define PCH_GBE_TM_TH_ALM_EMP_8 0x00000800
+#define PCH_GBE_TM_TH_ALM_EMP_16 0x00001000
+#define PCH_GBE_TM_TH_ALM_EMP_32 0x00001800
+#define PCH_GBE_TM_TH_ALM_EMP_64 0x00002000
+#define PCH_GBE_TM_TH_ALM_EMP_128 0x00002800
+#define PCH_GBE_TM_TH_ALM_EMP_256 0x00003000
+#define PCH_GBE_TM_TH_ALM_EMP_512 0x00003800
+#define PCH_GBE_TM_TH_ALM_FULL_4 0x00000000
+#define PCH_GBE_TM_TH_ALM_FULL_8 0x00000200
+#define PCH_GBE_TM_TH_ALM_FULL_16 0x00000400
+#define PCH_GBE_TM_TH_ALM_FULL_32 0x00000600
+
+/* MAC Address Mask */
+#define PCH_GBE_BUSY 0x80000000
+
+/* MIIM */
+#define PCH_GBE_MIIM_OPER_WRITE 0x04000000
+#define PCH_GBE_MIIM_OPER_READ 0x00000000
+#define PCH_GBE_MIIM_OPER_READY 0x04000000
+#define PCH_GBE_MIIM_PHY_ADDR_SHIFT 21
+#define PCH_GBE_MIIM_REG_ADDR_SHIFT 16
+
+/* RGMII Control */
+#define PCH_GBE_CRS_SEL 0x00000010
+#define PCH_GBE_RGMII_RATE_125M 0x00000000
+#define PCH_GBE_RGMII_RATE_25M 0x00000008
+#define PCH_GBE_RGMII_RATE_2_5M 0x0000000c
+#define PCH_GBE_RGMII_MODE_GMII 0x00000000
+#define PCH_GBE_RGMII_MODE_RGMII 0x00000002
+#define PCH_GBE_CHIP_TYPE_EXTERNAL 0x00000000
+#define PCH_GBE_CHIP_TYPE_INTERNAL 0x00000001
+
+/* DMA Control */
+#define PCH_GBE_RX_DMA_EN 0x00000002
+#define PCH_GBE_TX_DMA_EN 0x00000001
+
+/* Receive Descriptor bit definitions */
+#define PCH_GBE_RXD_ACC_STAT_BCAST 0x00000400
+#define PCH_GBE_RXD_ACC_STAT_MCAST 0x00000200
+#define PCH_GBE_RXD_ACC_STAT_UCAST 0x00000100
+#define PCH_GBE_RXD_ACC_STAT_TCPIPOK 0x000000c0
+#define PCH_GBE_RXD_ACC_STAT_IPOK 0x00000080
+#define PCH_GBE_RXD_ACC_STAT_TCPOK 0x00000040
+#define PCH_GBE_RXD_ACC_STAT_IP6ERR 0x00000020
+#define PCH_GBE_RXD_ACC_STAT_OFLIST 0x00000010
+#define PCH_GBE_RXD_ACC_STAT_TYPEIP 0x00000008
+#define PCH_GBE_RXD_ACC_STAT_MACL 0x00000004
+#define PCH_GBE_RXD_ACC_STAT_PPPOE 0x00000002
+#define PCH_GBE_RXD_ACC_STAT_VTAGT 0x00000001
+#define PCH_GBE_RXD_GMAC_STAT_PAUSE 0x0200
+#define PCH_GBE_RXD_GMAC_STAT_MARBR 0x0100
+#define PCH_GBE_RXD_GMAC_STAT_MARMLT 0x0080
+#define PCH_GBE_RXD_GMAC_STAT_MARIND 0x0040
+#define PCH_GBE_RXD_GMAC_STAT_MARNOTMT 0x0020
+#define PCH_GBE_RXD_GMAC_STAT_TLONG 0x0010
+#define PCH_GBE_RXD_GMAC_STAT_TSHRT 0x0008
+#define PCH_GBE_RXD_GMAC_STAT_NOTOCTAL 0x0004
+#define PCH_GBE_RXD_GMAC_STAT_NBLERR 0x0002
+#define PCH_GBE_RXD_GMAC_STAT_CRCERR 0x0001
+
+/* Transmit Descriptor bit definitions */
+#define PCH_GBE_TXD_CTRL_TCPIP_ACC_OFF 0x0008
+#define PCH_GBE_TXD_CTRL_ITAG 0x0004
+#define PCH_GBE_TXD_CTRL_ICRC 0x0002
+#define PCH_GBE_TXD_CTRL_APAD 0x0001
+#define PCH_GBE_TXD_WORDS_SHIFT 2
+#define PCH_GBE_TXD_GMAC_STAT_CMPLT 0x2000
+#define PCH_GBE_TXD_GMAC_STAT_ABT 0x1000
+#define PCH_GBE_TXD_GMAC_STAT_EXCOL 0x0800
+#define PCH_GBE_TXD_GMAC_STAT_SNGCOL 0x0400
+#define PCH_GBE_TXD_GMAC_STAT_MLTCOL 0x0200
+#define PCH_GBE_TXD_GMAC_STAT_CRSER 0x0100
+#define PCH_GBE_TXD_GMAC_STAT_TLNG 0x0080
+#define PCH_GBE_TXD_GMAC_STAT_TSHRT 0x0040
+#define PCH_GBE_TXD_GMAC_STAT_LTCOL 0x0020
+#define PCH_GBE_TXD_GMAC_STAT_TFUNDFLW 0x0010
+
+/**
+ * struct pch_gbe_rx_desc - Receive Descriptor
+ * @buffer_addr: RX Frame Buffer Address
+ * @tcp_ip_status: TCP/IP Accelerator Status
+ * @rx_words_eob: RX word count and Byte position
+ * @gbec_status: GMAC Status
+ * @dma_status: DMA Status
+ * @reserved1: Reserved
+ * @reserved2: Reserved
+ */
+struct pch_gbe_rx_desc {
+ u32 buffer_addr;
+ u32 tcp_ip_status;
+ u16 rx_words_eob;
+ u16 gbec_status;
+ u8 dma_status;
+ u8 reserved1;
+ u16 reserved2;
+};
+
+/**
+ * struct pch_gbe_tx_desc - Transmit Descriptor
+ * @buffer_addr: TX Frame Buffer Address
+ * @length: Data buffer length
+ * @reserved1: Reserved
+ * @tx_words_eob: TX word count and Byte position
+ * @tx_frame_ctrl: TX Frame Control
+ * @dma_status: DMA Status
+ * @reserved2: Reserved
+ * @gbec_status: GMAC Status
+ */
+struct pch_gbe_tx_desc {
+ u32 buffer_addr;
+ u16 length;
+ u16 reserved1;
+ u16 tx_words_eob;
+ u16 tx_frame_ctrl;
+ u8 dma_status;
+ u8 reserved2;
+ u16 gbec_status;
+};
+
+/**
+ * pch_gbe_regs_mac_adr - structure holding values of mac address registers
+ *
+ * @high Denotes the 1st to 4th byte from the initial of MAC address
+ * @low Denotes the 5th to 6th byte from the initial of MAC address
+ */
+struct pch_gbe_regs_mac_adr {
+ u32 high;
+ u32 low;
+};
+
+/**
+ * pch_gbe_regs - structure holding values of MAC registers
+ */
+struct pch_gbe_regs {
+ u32 int_st;
+ u32 int_en;
+ u32 mode;
+ u32 reset;
+ u32 tcpip_acc;
+ u32 ex_list;
+ u32 int_st_hold;
+ u32 phy_int_ctrl;
+ u32 mac_rx_en;
+ u32 rx_fctrl;
+ u32 pause_req;
+ u32 rx_mode;
+ u32 tx_mode;
+ u32 rx_fifo_st;
+ u32 tx_fifo_st;
+ u32 tx_fid;
+ u32 tx_result;
+ u32 pause_pkt1;
+ u32 pause_pkt2;
+ u32 pause_pkt3;
+ u32 pause_pkt4;
+ u32 pause_pkt5;
+ u32 reserve[2];
+ struct pch_gbe_regs_mac_adr mac_adr[16];
+ u32 addr_mask;
+ u32 miim;
+ u32 mac_addr_load;
+ u32 rgmii_st;
+ u32 rgmii_ctrl;
+ u32 reserve3[3];
+ u32 dma_ctrl;
+ u32 reserve4[3];
+ u32 rx_dsc_base;
+ u32 rx_dsc_size;
+ u32 rx_dsc_hw_p;
+ u32 rx_dsc_hw_p_hld;
+ u32 rx_dsc_sw_p;
+ u32 reserve5[3];
+ u32 tx_dsc_base;
+ u32 tx_dsc_size;
+ u32 tx_dsc_hw_p;
+ u32 tx_dsc_hw_p_hld;
+ u32 tx_dsc_sw_p;
+ u32 reserve6[3];
+ u32 rx_dma_st;
+ u32 tx_dma_st;
+ u32 reserve7[2];
+ u32 wol_st;
+ u32 wol_ctrl;
+ u32 wol_addr_mask;
+};
+
+struct pch_gbe_priv {
+ struct pch_gbe_rx_desc rx_desc[PCH_GBE_DESC_NUM];
+ struct pch_gbe_tx_desc tx_desc[PCH_GBE_DESC_NUM];
+ char rx_buff[PCH_GBE_DESC_NUM][PCH_GBE_RX_FRAME_LEN];
+ struct eth_device *dev;
+ struct phy_device *phydev;
+ struct mii_dev *bus;
+ struct pch_gbe_regs *mac_regs;
+ pci_dev_t bdf;
+ u32 interface;
+ int rx_idx;
+ int tx_idx;
+};
+
+#endif /* _PCH_GBE_H_ */
diff --git a/include/netdev.h b/include/netdev.h
index daffc12..4cbf055 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -70,6 +70,7 @@ int natsemi_initialize(bd_t *bis);
int ne2k_register(void);
int npe_initialize(bd_t *bis);
int ns8382x_initialize(bd_t *bis);
+int pch_gbe_register(bd_t *bis);
int pcnet_initialize(bd_t *bis);
int ppc_4xx_eth_initialize (bd_t *bis);
int rtl8139_initialize(bd_t *bis);
@@ -124,6 +125,9 @@ static inline int pci_eth_init(bd_t *bis)
#ifdef CONFIG_E1000
num += e1000_initialize(bis);
#endif
+#ifdef CONFIG_PCH_GBE
+ num += pch_gbe_register(bis);
+#endif
#ifdef CONFIG_PCNET
num += pcnet_initialize(bis);
#endif
--
1.8.2.1
More information about the U-Boot
mailing list