[U-Boot] [PATCH v4 24/28] armv8/ls2085aqds: NAND boot support

[York Sun]

On 03/20/2015 02:15 PM, Scott Wood wrote:
> On Fri, 2015-03-20 at 12:21 -0700, York Sun wrote:
>> From: Scott Wood <scottwood at freescale.com>
>>
>> This adds NAND boot support for LS2085AQDS, using SPL framework.
>>
>> To form a NAND image, append u-boot-with-spl.bin after a proper
>> nand boot RCW and flash to the beginning of NAND.
> 
> Do we want to do it this way, or should we keep the RCW in a separate
> block?

I would like to see RCW in a separated block.
> 
> What constitutes a "proper nand boot RCW" (those were not my words)?
> There are details in this patch regarding offsets that need to match
> details in the PBI (which is more than just RCW).

It is not your original words. Yours was "To form a NAND image, append
u-boot-with-spl.bin after PBL_0x3_0x07_1333_nand.bin and flash to the beginning
of NAND.". I try to make the message generic. A proper nand boot RCW means the
RCW should contains PBI commands to set bootloc and block copy the image. Since
RCW is not in the scope of u-boot, I cannot refer to any specific file.

Do you want to include an RCW file into u-boot, like those for powerpc boards?
> 
> It would also be nice to sort out loading the environment during SPL.
That can be an additional patch when you have it.

York