[U-Boot] [PATCH v5 25/28] freescale/qixis: Add support for booting from NAND

[York Sun]

From: Scott Wood <scottwood at freescale.com>

Use "qixis_reset nand" to reset the board to boot from NAND.

Signed-off-by: Scott Wood <scottwood at freescale.com>
Signed-off-by: York Sun <yorksun at freescale.com>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 board/freescale/common/qixis.c |   31 +++++++++++++++++++++----------
 1 file changed, 21 insertions(+), 10 deletions(-)

diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
index a49e300..9f6b0e7 100644
--- a/board/freescale/common/qixis.c
+++ b/board/freescale/common/qixis.c
@@ -138,24 +138,23 @@ void qixis_bank_reset(void)
 	QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START);
 }
 
-/* Set the boot bank to the power-on default bank */
-void clear_altbank(void)
+static void __maybe_unused set_lbmap(int lbmap)
 {
 	u8 reg;
 
 	reg = QIXIS_READ(brdcfg[0]);
-	reg = (reg & ~QIXIS_LBMAP_MASK) | QIXIS_LBMAP_DFLTBANK;
+	reg = (reg & ~QIXIS_LBMAP_MASK) | lbmap;
 	QIXIS_WRITE(brdcfg[0], reg);
 }
 
-/* Set the boot bank to the alternate bank */
-void set_altbank(void)
+static void __maybe_unused set_rcw_src(int rcw_src)
 {
 	u8 reg;
 
-	reg = QIXIS_READ(brdcfg[0]);
-	reg = (reg & ~QIXIS_LBMAP_MASK) | QIXIS_LBMAP_ALTBANK;
-	QIXIS_WRITE(brdcfg[0], reg);
+	reg = QIXIS_READ(dutcfg[1]);
+	reg = (reg & ~1) | (rcw_src & 1);
+	QIXIS_WRITE(dutcfg[1], reg);
+	QIXIS_WRITE(dutcfg[0], (rcw_src >> 1) & 0xff);
 }
 
 static void qixis_dump_regs(void)
@@ -201,11 +200,22 @@ int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	int i;
 
 	if (argc <= 1) {
-		clear_altbank();
+		set_lbmap(QIXIS_LBMAP_DFLTBANK);
 		qixis_reset();
 	} else if (strcmp(argv[1], "altbank") == 0) {
-		set_altbank();
+		set_lbmap(QIXIS_LBMAP_ALTBANK);
 		qixis_bank_reset();
+	} else if (strcmp(argv[1], "nand") == 0) {
+#ifdef QIXIS_LBMAP_NAND
+		QIXIS_WRITE(rst_ctl, 0x30);
+		QIXIS_WRITE(rcfg_ctl, 0);
+		set_lbmap(QIXIS_LBMAP_NAND);
+		set_rcw_src(QIXIS_RCW_SRC_NAND);
+		QIXIS_WRITE(rcfg_ctl, 0x20);
+		QIXIS_WRITE(rcfg_ctl, 0x21);
+#else
+		printf("Not implemented\n");
+#endif
 	} else if (strcmp(argv[1], "watchdog") == 0) {
 		static char *period[9] = {"2s", "4s", "8s", "16s", "32s",
 					  "1min", "2min", "4min", "8min"};
@@ -244,6 +254,7 @@ U_BOOT_CMD(
 	"Reset the board using the FPGA sequencer",
 	"- hard reset to default bank\n"
 	"qixis_reset altbank - reset to alternate bank\n"
+	"qixis_reset nand - reset to nand\n"
 	"qixis watchdog <watchdog_period> - set the watchdog period\n"
 	"	period: 1s 2s 4s 8s 16s 32s 1min 2min 4min 8min\n"
 	"qixis_reset dump - display the QIXIS registers\n"
-- 
1.7.9.5