[U-Boot] [linux-sunxi] [PATCH] sun6i: Add support for the Mixtile LOFT-Q board

[Hans de Goede]

Hi,

On 12-03-15 04:13, Phil Han wrote:
> From: Han Pengfei <pengphei at sina.com>
>
> The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi,
> 1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external
> USB2SATA connector, sd card plug, 3x60 external fpic expansion connector,
> NXP JN5168 zigbee gw, remote support.
>
> Also see http://focalcrest.com/en/pc.html#pro02
>
> Signed-off-by: Han Pengfei <pengphei at sina.com>

Thanks I've queued this up in u-boot-sunxi/next for merging upstream.

Regards,

Hans

> ---
>   board/sunxi/MAINTAINERS         |  5 +++++
>   configs/mixtile_loftq_defconfig | 16 ++++++++++++++++
>   2 files changed, 21 insertions(+)
>   create mode 100644 configs/mixtile_loftq_defconfig
>
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index ef3c937..90a634e 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -143,3 +143,8 @@ WEXLER-TAB7200 BOARD
>   M:	Aleksei Mamlin <mamlinav at gmail.com>
>   S:	Maintained
>   F:	configs/Wexler_TAB7200_defconfig
> +
> +MIXTILE-LOFTQ BOARD
> +M:  Phil Han <pengphei at sina.com>
> +S:  Maintained
> +F:  configs/mixtile_loftq_defconfig
> diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig
> new file mode 100644
> index 0000000..94ebdc8
> --- /dev/null
> +++ b/configs/mixtile_loftq_defconfig
> @@ -0,0 +1,16 @@
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
> ++S:CONFIG_ARM=y
> ++S:CONFIG_ARCH_SUNXI=y
> ++S:CONFIG_MACH_SUN6I=y
> ++S:CONFIG_TARGET_MIXTILE_LOFTQ=y
> ++S:CONFIG_DRAM_CLK=312
> ++S:CONFIG_DRAM_ZQ=251
> ++S:CONFIG_MMC_SUNXI_SLOT=0
> ++S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> +# Wifi power
> ++S:CONFIG_AXP221_ALDO1_VOLT=3300
> +# Vbus gpio for usb1
> ++S:CONFIG_USB1_VBUS_PIN="PH24"
> +# No Vbus gpio for usb2
> ++S:CONFIG_USB2_VBUS_PIN=""
>