[U-Boot] [PATCH 02/13] ARM: UniPhier: move platform devices to SPL

[Masahiro Yamada]

Since we do not have OF_CONTROL support for SPL, platform devices
are necessary to enable Driver Model on SPL.

To prepare for that, move platdevice.o to SPL and enable it by
CONFIG_SPL_DM.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 arch/arm/mach-uniphier/ph1-ld4/Makefile  | 2 +-
 arch/arm/mach-uniphier/ph1-pro4/Makefile | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile
index 5ce3d8a..fa36419 100644
--- a/arch/arm/mach-uniphier/ph1-ld4/Makefile
+++ b/arch/arm/mach-uniphier/ph1-ld4/Makefile
@@ -8,9 +8,9 @@ obj-y += bcu_init.o sg_init.o pll_init.o early_clkrst_init.o \
 	pll_spectrum.o umc_init.o ddrphy_init.o
 obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
 obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
+obj-$(CONFIG_SPL_DM) += platdevice.o
 else
 obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
-obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
 endif
 
 obj-y += boot-mode.o
diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile
index b88525c..ac27d9b 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/Makefile
+++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile
@@ -8,9 +8,9 @@ obj-y += sg_init.o pll_init.o early_clkrst_init.o \
 	pll_spectrum.o umc_init.o ddrphy_init.o
 obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
 obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
+obj-$(CONFIG_SPL_DM) += platdevice.o
 else
 obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
-obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
 endif
 
 obj-y += boot-mode.o
-- 
1.9.1