[U-Boot] [PATCH v2 1/3] ARM: mx6: move to a standard arch/board approach

[Stefano Babic]

On 04/03/2015 13:13, Boris Brezillon wrote:
> Freescale boards are currently all defined in arch/arm/Kconfig, which
> makes them hard to detect.
> Moreover the MX6 SoC variant (Q, D, DL, S, SL) selection is currently
> done via the SYS_EXTRA_OPTIONS option which marked as deprecated.
> 
> Move to a more standard way to select sub-architecture and board by
> creating a Kconfig under arch/arm/cpu/armv7/mx6 and a new ARCH_MX6
> option.
> 
> Existing MX6 board definitions should be moved in this new Kconfig in
> choice menu, and new boards should be directly declared in this menu.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================