[U-Boot] [PATCH v4 20/28] armv8/ls2085ardb: Add support of LS2085ARDB platform

[Scott Wood]

On Fri, 2015-03-20 at 18:46 -0700, York Sun wrote:
> 
> On 03/20/2015 05:33 PM, Scott Wood wrote:
> > On Fri, 2015-03-20 at 17:29 -0700, York Sun wrote:
> >> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> >> index f4a7851..7478eb4 100644
> >> --- a/arch/arm/Kconfig
> >> +++ b/arch/arm/Kconfig
> >> @@ -658,6 +658,16 @@ config TARGET_LS2085AQDS
> >>  	  development platform that supports the QorIQ LS2085A
> >>  	  Layerscape Architecture processor.
> >>  
> >> +config TARGET_LS2085ARDB
> >> +	bool "Support ls2085ardb"
> >> +	select ARM64
> >> +	select ARMV8_MULTIENTRY
> >> +	help
> >> +	  Support for Freescale LS2085ARDB platform.
> >> +	  The LS2080A Reference design board (RDB) is a high-performance
> >> +	  development platform that supports the QorIQ LS2085A
> >> +	  LayerScape Architecture processor.
> >> +
> > 
> > s/LayerScape/Layerscape/
> > 
> >> diff --git a/board/freescale/ls2085aqds/README b/board/freescale/ls2085ardb/README
> >> similarity index 73%
> >> copy from board/freescale/ls2085aqds/README
> >> copy to board/freescale/ls2085ardb/README
> >> index a4d7b53..cfd5185 100644
> >> --- a/board/freescale/ls2085aqds/README
> >> +++ b/board/freescale/ls2085ardb/README
> >> @@ -1,10 +1,8 @@
> >>  Overview
> >>  --------
> >> -The LS2080A Development System (QDS) is a high-performance computing,
> >> -evaluation, and development platform that supports the QorIQ LS2080A
> >> -LayerScape Architecture processor. The LS2080AQDS provides validation and
> >> -SW development platform for the Freescale LS2080A processor series, with
> >> -a complete debugging environment.
> >> +The LS2085A Reference Design (RDB) is a high-performance computing,
> >> +evaluation, and development platform that supports the QorIQ LS2085A
> >> +Layerscape Architecture processor.
> > 
> > "LayerScape" and 2080 should be fixed in the QDS patch as well.
> > 
> >> @@ -113,25 +105,25 @@ unsigned long get_board_ddr_clk(void);
> >>  #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
> >>  				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
> >>  				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
> >> -				| CSOR_NAND_RAL_3	/* RAL = 2Byes */ \
> >> -				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
> >> -				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
> >> -				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
> >> +				| CSOR_NAND_RAL_3	/* RAL = 3Byes */ \
> >> +				| CSOR_NAND_PGS_4K	/* Page Size = 4K */ \
> >> +				| CSOR_NAND_SPRZ_224	/* Spare size = 224 */ \
> >> +				| CSOR_NAND_PB(128))	/*Pages Per Block = 128*/
> > 
> > From this it looks like the QDS patch still has a comment/code
> > inconsistency with RAL.
> > 
> 
> Let me re-generate the patch using patman, without -C --find-copies-harder flag
> so they don't show as copy-n-modify.

Why?  I found it rather useful.  In any case, the error in the QDS file
will still be there.

-SCott