[U-Boot] [PATCH] mmc: sdhci: add timeout setting for response busy command

Rob Herring robh at kernel.org
Mon Mar 23 23:57:00 CET 2015


From: Kevin Liu <kliu5 at marvell.com>

Timeout interrupt also work for response busy command(R1b) like
cmd38/cmd6. So need to set it accordingly. Current code only
set timeout for data command.

Signed-off-by: Kevin Liu <kliu5 at marvell.com>
Signed-off-by: Rob Herring <robh at kernel.org>
Cc: Pantelis Antoniou <panto at antoniou-consulting.com>
---
 drivers/mmc/sdhci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 78e958e..8faeca3 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -213,6 +213,8 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
 				SDHCI_BLOCK_SIZE);
 		sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
 		sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
+	} else if (cmd->resp_type & MMC_RSP_BUSY) {
+		sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
 	}
 
 	sdhci_writel(host, cmd->cmdarg, SDHCI_ARGUMENT);
-- 
2.1.0



More information about the U-Boot mailing list