[U-Boot] [PATCH v3 15/17] odroid: board: add support to dm pmic api

Przemyslaw Marczak p.marczak at samsung.com
Tue Mar 24 21:30:49 CET 2015


This commit change the old pmic framework calls with the new ones.

Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
---
Changes v2:
- remove board_init_i2c() call
- update regulator calls
- update headers
- samsung/misc.c: include required header

Changes v3:
- adjust regulator calls to new api
---
 board/samsung/common/misc.c   |   1 +
 board/samsung/odroid/odroid.c | 113 +++++++++++++++++++++++++++++++++---------
 2 files changed, 91 insertions(+), 23 deletions(-)

diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
index 1a77c82..f0d69d4 100644
--- a/board/samsung/common/misc.c
+++ b/board/samsung/common/misc.c
@@ -16,6 +16,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/gpio.h>
 #include <linux/input.h>
+#include <dm.h>
 #include <power/pmic.h>
 #include <mmc.h>
 
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index ae41c29..aa3b0ff 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -12,7 +12,9 @@
 #include <asm/arch/gpio.h>
 #include <asm/gpio.h>
 #include <asm/arch/cpu.h>
+#include <dm.h>
 #include <power/pmic.h>
+#include <power/regulator.h>
 #include <power/max77686_pmic.h>
 #include <errno.h>
 #include <mmc.h>
@@ -405,15 +407,62 @@ static void board_gpio_init(void)
 
 static int pmic_init_max77686(void)
 {
-	struct pmic *p = pmic_get("MAX77686_PMIC");
+	struct udevice *dev;
+	int ret;
 
-	if (pmic_probe(p))
-		return -ENODEV;
+	ret = regulator_get("VDDQ_EMMC_1.8V", &dev);
+	if (ret) {
+		error("Regulator get error: %d", ret);
+		return ret;
+	}
+
+	ret = regulator_set_value(dev, 1800000);
+	if (ret) {
+		error("Regulator %s value setting error: %d", dev->name, ret);
+		return ret;
+	}
+
+	ret = regulator_set_enable(dev, true);
+	if (ret) {
+		error("Regulator %s enable error: %d", dev->name, ret);
+		return ret;
+	}
+
+	ret = regulator_get("TFLASH_2.8V", &dev);
+	if (ret) {
+		error("Regulator get error: %d", ret);
+		return ret;
+	}
+
+	ret = regulator_set_value(dev, 2800000);
+	if (ret) {
+		error("Regulator %s value setting error: %d", dev->name, ret);
+		return ret;
+	}
+
+	ret = regulator_set_enable(dev, true);
+	if (ret) {
+		error("Regulator %s enable error: %d", dev->name, ret);
+		return ret;
+	}
+
+	ret = regulator_get("VDDQ_EMMC_2.8V", &dev);
+	if (ret) {
+		error("Regulator get error: %d", ret);
+		return ret;
+	}
 
-	/* Set LDO Voltage */
-	max77686_set_ldo_voltage(p, 20, 1800000);	/* LDO20 eMMC */
-	max77686_set_ldo_voltage(p, 21, 2800000);	/* LDO21 SD */
-	max77686_set_ldo_voltage(p, 22, 2800000);	/* LDO22 eMMC */
+	ret = regulator_set_value(dev, 2800000);
+	if (ret) {
+		error("Regulator %s value setting error: %d", dev->name, ret);
+		return ret;
+	}
+
+	ret = regulator_set_enable(dev, true);
+	if (ret) {
+		error("Regulator %s enable error: %d", dev->name, ret);
+		return ret;
+	}
 
 	return 0;
 }
@@ -434,7 +483,6 @@ int exynos_init(void)
 
 int exynos_power_init(void)
 {
-	pmic_init(0);
 	pmic_init_max77686();
 
 	return 0;
@@ -443,19 +491,20 @@ int exynos_power_init(void)
 #ifdef CONFIG_USB_GADGET
 static int s5pc210_phy_control(int on)
 {
-	struct pmic *p_pmic;
-
-	p_pmic = pmic_get("MAX77686_PMIC");
-	if (!p_pmic)
-		return -ENODEV;
+	struct udevice *dev;
+	int ret;
 
-	if (pmic_probe(p_pmic))
-		return -1;
+	ret = regulator_get("VDD_UOTG_3.0V", &dev);
+	if (ret) {
+		error("Regulator get error: %d", ret);
+		return ret;
+	}
 
 	if (on)
-		return max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
+		return regulator_set_mode(dev, OPMODE_ON);
 	else
-		return max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
+		return regulator_set_mode(dev, OPMODE_LPM);
+
 }
 
 struct s3c_plat_otg_data s5pc210_otg_data = {
@@ -472,7 +521,8 @@ struct s3c_plat_otg_data s5pc210_otg_data = {
 int board_usb_init(int index, enum usb_init_type init)
 {
 #ifdef CONFIG_CMD_USB
-	struct pmic *p_pmic;
+	struct udevice *dev;
+	int ret;
 
 	/* Set Ref freq 0 => 24MHz, 1 => 26MHz*/
 	/* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */
@@ -490,14 +540,31 @@ int board_usb_init(int index, enum usb_init_type init)
 	/* Power off and on BUCK8 for LAN9730 */
 	debug("LAN9730 - Turning power buck 8 OFF and ON.\n");
 
-	p_pmic = pmic_get("MAX77686_PMIC");
-	if (p_pmic && !pmic_probe(p_pmic)) {
-		max77686_set_buck_voltage(p_pmic, 8, 750000);
-		max77686_set_buck_voltage(p_pmic, 8, 3300000);
+	ret = regulator_get("VCC_P3V3_2.85V", &dev);
+	if (ret) {
+		error("Regulator get error: %d", ret);
+		return ret;
 	}
 
-#endif
+	ret = regulator_set_enable(dev, true);
+	if (ret) {
+		error("Regulator %s enable setting error: %d", dev->name, ret);
+		return ret;
+	}
+
+	ret = regulator_set_value(dev, 750000);
+	if (ret) {
+		error("Regulator %s value setting error: %d", dev->name, ret);
+		return ret;
+	}
 
+	ret = regulator_set_value(dev, 3300000);
+	if (ret) {
+		error("Regulator %s value setting error: %d", dev->name, ret);
+		return ret;
+	}
+
+#endif
 	debug("USB_udc_probe\n");
 	return s3c_udc_probe(&s5pc210_otg_data);
 }
-- 
1.9.1



More information about the U-Boot mailing list