[U-Boot] [PATCH v3 1/3] ARM: DRA7XX: Enable Fastboot

[Dileep Katta]

	- Fastboot is enable by default for DRA7XX
        - This is based on following patch modified accordingly
http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=b2e04f92b5d91c708b6fd6b79d2266966ac51f4b

Signed-off-by: Angela Stegmaier <angelabaker at ti.com>
Signed-off-by: Dileep Katta <dileep.katta at linaro.org>
---
Changes in v2:
        - Merged the header file content to existing dra7xx_evm.h to avoid duplication
        - Removed unnecessary definitions as per comments
Changes in v3:
	- Added the changes on dwc3_gadget developer branch of DFU tree
	- Added the changes as part of existing dra7xx_evm_defconfig
	- Enabled fastboot by default
	- Kept fastboot aware VID/PID only
	- reverted change made for U-Boot offset

 include/configs/dra7xx_evm.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index e94b618..7acd907 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -84,6 +84,14 @@
 	DFU_ALT_INFO_EMMC \
 	DFU_ALT_INFO_RAM
 
+/* Fastboot */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_USB_FASTBOOT_BUF_ADDR    CONFIG_SYS_LOAD_ADDR
+#define CONFIG_USB_FASTBOOT_BUF_SIZE    0x2F000000
+#define CONFIG_FASTBOOT_FLASH
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV   1
+
 #include <configs/ti_omap5_common.h>
 
 /* Enhance our eMMC support / experience. */
@@ -181,8 +189,8 @@
 #define CONFIG_USBDOWNLOAD_GADGET
 #define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
-#define CONFIG_G_DNL_VENDOR_NUM 0x0403
-#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
+#define CONFIG_G_DNL_VENDOR_NUM 0x0451
+#define CONFIG_G_DNL_PRODUCT_NUM 0xd022
 #define CONFIG_USB_GADGET_DUALSPEED
 
 /* USB Device Firmware Update support */
-- 
1.8.3.2