[U-Boot] [PATCH v2 63/80] dm: usb: xhci: Use explicit parameters for xhci_setup_addressable_virt_dev()
Simon Glass
sjg at chromium.org
Wed Mar 25 19:22:51 CET 2015
This function should not be delving into struct usb_device. Pass in the
parameters it needs directly.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
drivers/usb/host/xhci-mem.c | 19 +++++++------------
drivers/usb/host/xhci.c | 29 ++++++++++++++++++++++-------
drivers/usb/host/xhci.h | 3 ++-
3 files changed, 31 insertions(+), 20 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 4644ffa..1b55534 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -625,17 +625,16 @@ void xhci_slot_copy(struct xhci_ctrl *ctrl, struct xhci_container_ctx *in_ctx,
* @param udev pointer to the Device Data Structure
* @return returns negative value on failure else 0 on success
*/
-void xhci_setup_addressable_virt_dev(struct usb_device *udev)
+void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl, int slot_id,
+ int speed, int hop_portnr)
{
- struct usb_device *hop = udev;
struct xhci_virt_device *virt_dev;
struct xhci_ep_ctx *ep0_ctx;
struct xhci_slot_ctx *slot_ctx;
u32 port_num = 0;
u64 trb_64 = 0;
- struct xhci_ctrl *ctrl = udev->controller;
- virt_dev = ctrl->devs[udev->slot_id];
+ virt_dev = ctrl->devs[slot_id];
BUG_ON(!virt_dev);
@@ -646,7 +645,7 @@ void xhci_setup_addressable_virt_dev(struct usb_device *udev)
/* Only the control endpoint is valid - one endpoint context */
slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | 0);
- switch (udev->speed) {
+ switch (speed) {
case USB_SPEED_SUPER:
slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS);
break;
@@ -664,11 +663,7 @@ void xhci_setup_addressable_virt_dev(struct usb_device *udev)
BUG();
}
- /* Extract the root hub port number */
- if (hop->parent)
- while (hop->parent->parent)
- hop = hop->parent;
- port_num = hop->portnr;
+ port_num = hop_portnr;
debug("port_num = %d\n", port_num);
slot_ctx->dev_info2 |=
@@ -678,9 +673,9 @@ void xhci_setup_addressable_virt_dev(struct usb_device *udev)
/* Step 4 - ring already allocated */
/* Step 5 */
ep0_ctx->ep_info2 = cpu_to_le32(CTRL_EP << EP_TYPE_SHIFT);
- debug("SPEED = %d\n", udev->speed);
+ debug("SPEED = %d\n", speed);
- switch (udev->speed) {
+ switch (speed) {
case USB_SPEED_SUPER:
ep0_ctx->ep_info2 |= cpu_to_le32(((512 & MAX_PACKET_MASK) <<
MAX_PACKET_SHIFT));
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index de006f7..774c3e6 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -384,7 +384,7 @@ static int xhci_set_configuration(struct usb_device *udev)
* @param udev pointer to the Device Data Structure
* @return 0 if successful else error code on failure
*/
-static int xhci_address_device(struct usb_device *udev)
+static int xhci_address_device(struct usb_device *udev, int root_portnr)
{
int ret = 0;
struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
@@ -400,8 +400,9 @@ static int xhci_address_device(struct usb_device *udev)
* This is the first Set Address since device plug-in
* so setting up the slot context.
*/
- debug("Setting up addressable devices\n");
- xhci_setup_addressable_virt_dev(udev);
+ debug("Setting up addressable devices %p\n", ctrl->dcbaa);
+ xhci_setup_addressable_virt_dev(ctrl, udev->slot_id, udev->speed,
+ root_portnr);
ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
@@ -903,11 +904,12 @@ submit_bulk_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
* @param buffer buffer to be read/written based on the request
* @param length length of the buffer
* @param setup Request type
+ * @param root_portnr Root port number that this device is on
* @return returns 0 if successful else -1 on failure
*/
-int
-submit_control_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
- int length, struct devrequest *setup)
+static int _xhci_submit_control_msg(struct usb_device *udev, unsigned long pipe,
+ void *buffer, int length,
+ struct devrequest *setup, int root_portnr)
{
struct xhci_ctrl *ctrl = xhci_get_ctrl(udev);
int ret = 0;
@@ -921,7 +923,7 @@ submit_control_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
return xhci_submit_root(udev, pipe, buffer, setup);
if (setup->request == USB_REQ_SET_ADDRESS)
- return xhci_address_device(udev);
+ return xhci_address_device(udev, root_portnr);
if (setup->request == USB_REQ_SET_CONFIGURATION) {
ret = xhci_set_configuration(udev);
@@ -1007,6 +1009,19 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
return 0;
}
+int submit_control_msg(struct usb_device *udev, unsigned long pipe,
+ void *buffer, int length, struct devrequest *setup)
+{
+ struct usb_device *hop = udev;
+
+ if (hop->parent)
+ while (hop->parent->parent)
+ hop = hop->parent;
+
+ return _xhci_submit_control_msg(udev, pipe, buffer, length, setup,
+ hop->portnr);
+}
+
/**
* Stops the XHCI host controller
* and cleans up all the related data structures
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 00faa81..916a5a4 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1232,7 +1232,8 @@ void xhci_endpoint_copy(struct xhci_ctrl *ctrl,
void xhci_slot_copy(struct xhci_ctrl *ctrl,
struct xhci_container_ctx *in_ctx,
struct xhci_container_ctx *out_ctx);
-void xhci_setup_addressable_virt_dev(struct usb_device *udev);
+void xhci_setup_addressable_virt_dev(struct xhci_ctrl *ctrl, int slot_id,
+ int speed, int hop_portnr);
void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr,
u32 slot_id, u32 ep_index, trb_type cmd);
void xhci_acknowledge_event(struct xhci_ctrl *ctrl);
--
2.2.0.rc0.207.ga3a616c
More information about the U-Boot
mailing list