[U-Boot] [PATCH v2 38/80] dm: usb: Refactor EHCI init
Simon Glass
sjg at chromium.org
Wed Mar 25 19:22:26 CET 2015
Move the bulk of the code in usb_lowlevel_init() into a separate function
which will also be used by driver model. Keep the CONFIG options out of
this function by providing a tweak flag for Faraday. We need to avoid using
CONFIG options in driver model code where possible, since it makes it
impossible to use multiple controllers in that code where they have
different options.
The CONFIG_EHCI_HCD_INIT_AFTER_RESET option is also kept out of the
common init function. With driver model the controller will be able to
perform this extra init itself after registering with the EHCI layer.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
drivers/usb/host/ehci-hcd.c | 117 +++++++++++++++++++++++++-------------------
drivers/usb/host/ehci.h | 6 +++
2 files changed, 72 insertions(+), 51 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index d01e17e..3fa6fe2 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -945,41 +945,19 @@ void *ehci_get_controller_priv(int index)
return ehcic[index].priv;
}
-int usb_lowlevel_stop(int index)
-{
- ehci_shutdown(&ehcic[index]);
- return ehci_hcd_stop(index);
-}
-
-int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
+static int ehci_common_init(struct ehci_ctrl *ctrl, uint tweaks)
{
- uint32_t reg;
- uint32_t cmd;
struct QH *qh_list;
struct QH *periodic;
+ uint32_t reg;
+ uint32_t cmd;
int i;
- int rc;
-
- rc = ehci_hcd_init(index, init, &ehcic[index].hccr, &ehcic[index].hcor);
- if (rc)
- return rc;
- if (init == USB_INIT_DEVICE)
- goto done;
-
- /* EHCI spec section 4.1 */
- if (ehci_reset(index))
- return -1;
-#if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET)
- rc = ehci_hcd_init(index, init, &ehcic[index].hccr, &ehcic[index].hcor);
- if (rc)
- return rc;
-#endif
/* Set the high address word (aka segment) for 64-bit controller */
- if (ehci_readl(&ehcic[index].hccr->cr_hccparams) & 1)
- ehci_writel(&ehcic[index].hcor->or_ctrldssegment, 0);
+ if (ehci_readl(&ctrl->hccr->cr_hccparams) & 1)
+ ehci_writel(&ctrl->hcor->or_ctrldssegment, 0);
- qh_list = &ehcic[index].qh_list;
+ qh_list = &ctrl->qh_list;
/* Set head of reclaim list */
memset(qh_list, 0, sizeof(*qh_list));
@@ -995,14 +973,14 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
ALIGN_END_ADDR(struct QH, qh_list, 1));
/* Set async. queue head pointer. */
- ehci_writel(&ehcic[index].hcor->or_asynclistaddr, (uint32_t)qh_list);
+ ehci_writel(&ctrl->hcor->or_asynclistaddr, (uint32_t)qh_list);
/*
* Set up periodic list
* Step 1: Parent QH for all periodic transfers.
*/
- ehcic[index].periodic_schedules = 0;
- periodic = &ehcic[index].periodic_queue;
+ ctrl->periodic_schedules = 0;
+ periodic = &ctrl->periodic_queue;
memset(periodic, 0, sizeof(*periodic));
periodic->qh_link = cpu_to_hc32(QH_LINK_TERMINATE);
periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
@@ -1020,25 +998,25 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
* Split Transactions will be spread across microframes using
* S-mask and C-mask.
*/
- if (ehcic[index].periodic_list == NULL)
- ehcic[index].periodic_list = memalign(4096, 1024 * 4);
+ if (ctrl->periodic_list == NULL)
+ ctrl->periodic_list = memalign(4096, 1024 * 4);
- if (!ehcic[index].periodic_list)
+ if (!ctrl->periodic_list)
return -ENOMEM;
for (i = 0; i < 1024; i++) {
- ehcic[index].periodic_list[i] = cpu_to_hc32((uint32_t)periodic
+ ctrl->periodic_list[i] = cpu_to_hc32((uint32_t)periodic
| QH_LINK_TYPE_QH);
}
- flush_dcache_range((uint32_t)ehcic[index].periodic_list,
- ALIGN_END_ADDR(uint32_t, ehcic[index].periodic_list,
+ flush_dcache_range((uint32_t)ctrl->periodic_list,
+ ALIGN_END_ADDR(uint32_t, ctrl->periodic_list,
1024));
/* Set periodic list base address */
- ehci_writel(&ehcic[index].hcor->or_periodiclistbase,
- (uint32_t)ehcic[index].periodic_list);
+ ehci_writel(&ctrl->hcor->or_periodiclistbase,
+ (uint32_t)ctrl->periodic_list);
- reg = ehci_readl(&ehcic[index].hccr->cr_hcsparams);
+ reg = ehci_readl(&ctrl->hccr->cr_hcsparams);
descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
debug("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
/* Port Indicators */
@@ -1051,29 +1029,66 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
| 0x01, &descriptor.hub.wHubCharacteristics);
/* Start the host controller. */
- cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
+ cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
/*
* Philips, Intel, and maybe others need CMD_RUN before the
* root hub will detect new devices (why?); NEC doesn't
*/
cmd &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
cmd |= CMD_RUN;
- ehci_writel(&ehcic[index].hcor->or_usbcmd, cmd);
+ ehci_writel(&ctrl->hcor->or_usbcmd, cmd);
-#ifndef CONFIG_USB_EHCI_FARADAY
- /* take control over the ports */
- cmd = ehci_readl(&ehcic[index].hcor->or_configflag);
- cmd |= FLAG_CF;
- ehci_writel(&ehcic[index].hcor->or_configflag, cmd);
-#endif
+ if (!(tweaks & EHCI_TWEAK_NO_INIT_CF)) {
+ /* take control over the ports */
+ cmd = ehci_readl(&ctrl->hcor->or_configflag);
+ cmd |= FLAG_CF;
+ ehci_writel(&ctrl->hcor->or_configflag, cmd);
+ }
/* unblock posted write */
- cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
+ cmd = ehci_readl(&ctrl->hcor->or_usbcmd);
mdelay(5);
- reg = HC_VERSION(ehci_readl(&ehcic[index].hccr->cr_capbase));
+ reg = HC_VERSION(ehci_readl(&ctrl->hccr->cr_capbase));
printf("USB EHCI %x.%02x\n", reg >> 8, reg & 0xff);
- ehcic[index].rootdev = 0;
+ return 0;
+}
+
+int usb_lowlevel_stop(int index)
+{
+ ehci_shutdown(&ehcic[index]);
+ return ehci_hcd_stop(index);
+}
+
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
+{
+ struct ehci_ctrl *ctrl = &ehcic[index];
+ uint tweaks = 0;
+ int rc;
+
+ rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor);
+ if (rc)
+ return rc;
+ if (init == USB_INIT_DEVICE)
+ goto done;
+
+ /* EHCI spec section 4.1 */
+ if (ehci_reset(index))
+ return -1;
+
+#if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET)
+ rc = ehci_hcd_init(index, init, &ctrl->hccr, &ctrl->hcor);
+ if (rc)
+ return rc;
+#endif
+#ifdef CONFIG_USB_EHCI_FARADAY
+ tweaks |= EHCI_TWEAK_NO_INIT_CF;
+#endif
+ rc = ehci_common_init(ctrl, tweaks);
+ if (rc)
+ return rc;
+
+ ctrl->rootdev = 0;
done:
*controller = &ehcic[index];
return 0;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 0fd59bc..2ca111a 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -238,6 +238,12 @@ struct QH {
};
};
+/* Tweak flags for EHCI, used to control operation */
+enum {
+ /* don't use or_configflag in init */
+ EHCI_TWEAK_NO_INIT_CF = 1 << 0,
+};
+
struct ehci_ctrl {
struct ehci_hccr *hccr; /* R/O registers, not need for volatile */
struct ehci_hcor *hcor;
--
2.2.0.rc0.207.ga3a616c
More information about the U-Boot
mailing list