[U-Boot] [PATCH v2 57/80] dm: usb: tegra: Remove the port_addr_clear_csc variable
Jim Lin
jilin at nvidia.com
Thu Mar 26 04:38:25 CET 2015
> -----Original Message-----
> From: U-Boot [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Simon Glass
> Sent: Thursday, March 26, 2015 2:23 AM
> To: U-Boot Mailing List
> Cc: Marek Vasut; Stephen Warren; Vivek Gautam; Tom Warren
> Subject: [U-Boot] [PATCH v2 57/80] dm: usb: tegra: Remove the port_addr_clear_csc variable
>
> This variable is a bit of a hack. We can obtain the same information from the normal device config. This will fit better with driver model, where global variables > are best avoided.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> Changes in v2: None
>
> drivers/usb/host/ehci-tegra.c | 6 +-----
> 1 file changed, 1 insertion(+), 5 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 38333c7..464f55d 100644
> --- a/drivers/usb/host/ehci-tegra.c
> +++ b/drivers/usb/host/ehci-tegra.c
> @@ -87,8 +87,6 @@ struct fdt_usb {
>
> static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */
> static unsigned port_count; /* Number of available ports */
> -/* Port that needs to clear CSC after Port Reset */ -static u32 port_addr_clear_csc;
>
> /*
> * This table has USB timing parameters for each Oscillator frequency we @@ -206,7 +204,7 @@ static void tegra_ehci_powerup_fixup(struct ehci_ctrl *ctrl,
if (controller->has_hostpc)
> *reg |= EHCI_PS_PE;
>
> - if (((u32)status_reg & TEGRA_USB_ADDR_MASK) != port_addr_clear_csc)
> + if (!config->has_legacy_mode)
> return;
How do we get config (config->has_legacy_mode) for in this function?
If you read ehci_set_usbmode, "config" comes from
"config = &port[index];".
Or "config" is an input argument like set_up_vbus(struct fdt_usb *config, ...)
But for ehci_powerup_fixup, I don't see a way for us to get "config".
> /* For EHCI_PS_CSC to be cleared in ehci_hcd.c */
--nvpublic
More information about the U-Boot
mailing list