[U-Boot] [PATCH] sunxi: set GMAC TX delay = 0x1 on Cubietruck.

[Hans de Goede]

Hi,

On 25-03-15 14:39, Ian Campbell wrote:
> Of 4 boards in our automated test system 2 do not have reliable
> networking with the default TX delay of 0x0. Increasing to 0x1 seems
> to make things reliable on all 4 boards.
>
> Some previous ad-hpoc tests with tx delay set to 0, 1, 2 and 3 on one
> of the problematic boards showed:
>
> 0: mw.l 0x1c20164 0x006 1     -- t/o in 4/5 tftp runs
> 1: mw.l 0x1c20164 0x406 1     -- t/o in 1/5 tftp runs
> 2: mw.l 0x1c20164 0x806 1     -- t/o in 1/5 tftp runs
> 3: mw.l 0x1c20164 0xc06 1     -- t/o many times in first tftp run
>
> For 0, 1 and 2 "t/o" means one or two "T" glitches in the download,
> but it did complete. For 3 those were basically continuous and it
> couldn't complete.
>
> tftp was of a 16M initrd.
>
> Signed-off-by: Ian Campbell <ian.campbell at citrix.com>

Thanks, I've merged this into u-boot-sunxi/master and added this
in a small fixed pull-req which I've just send.

Regards,

Hans

> ---
> NB, Unlike the normal typo I actually mean to use my citrix address
> here, since this was done for/at work.
>
> Actual testing was done on v2014.10 with the same direct write hack as
> BananaPi had in that release (but with value == 1), I can't easily
> upgrade the remove machines to something newer. The affect of this
> patch is the same and has been tested on a local board, which didn't
> have problems to start with however.
> ---
>   configs/Cubietruck_defconfig | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
> index 5c23bc7..fa48331 100644
> --- a/configs/Cubietruck_defconfig
> +++ b/configs/Cubietruck_defconfig
> @@ -1,6 +1,7 @@
>   CONFIG_SPL=y
>   CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
>   CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb"
> +CONFIG_GMAC_TX_DELAY=1
>   CONFIG_VIDEO_VGA=y
>   CONFIG_ARM=y
>   CONFIG_ARCH_SUNXI=y
>