[U-Boot] [PATCH 0/4] Add support for stm32f429-discovery board

[Tom Rini]

On Thu, Mar 26, 2015 at 02:47:17PM +0100, Kamil Lulko wrote:
> On 25/03/15 17:58, Tom Rini wrote:
> >On Wed, Mar 25, 2015 at 01:07:47PM +0900, Chanwoo Choi wrote:
> >>Hi Kamil,
> >>
> >>I tested this patch-set in STM32 Discovery board. After applied this
> >>patch-set on latest u-boot, I could not see the normal u-boot log. I
> >>saw broken console log. I used the USART1 port (pa9, pa10 gpio pin).
> >>
> >>Could you give me a tip to resolve this issue?
> >I bet this needs changes similar to b81bdf6 as that was a similar
> >problem I believe.  In short, DM needs to be enabled now.
> >
> >>Best Regards,
> >>Chanwoo Choi
> >>
> >>2015년 3월 1일 일요일, Kamil Lulko<rev13 at wp.pl>님이 작성한 메시지:
> 
> I have tested this patch set again with 2015.04-rc4-gf643d92 and
> serial works without any problems.
> 
> Chanwoo, you mention STM32 Discovery board - this patch set supports
> only STM32F429 Discovery (it should work on SDRAM-less boards but
> not without modifications). Other than that the only thing I can
> think of is configuration of the UART<>USB converter.
> 
> Tom, does this mean changes are required for this patchset to be
> accepted? I have more things queued up (like moving some of SDRAM
> configuration bits out of the board code or LCD display support) but
> I would prefer to have some kind of assurance that this will not go
> into /dev/null eventually :)

Right now the patches don't apply cleanly due to 68145d4c but it's an
easy enough fixup by hand.  I plan to apply the current series after the
2015.04 release.  If you want to start posting stuff that depends on the
initial series being applied that's fine.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150326/c7974c6a/attachment.sig>