[U-Boot] [PATCH 3/3 v1] arm: ls102xa: Enable Driver Model SPI for ls1021atwr

[Haikun Wang]

From: Haikun Wang <Haikun.Wang at freescale.com>

Enable Driver Model SPI for ls1021atwr board.
DSPI and QSPI are compatible under Driver Model SPI.

Signed-off-by: Haikun Wang <Haikun.Wang at freescale.com>
---
 include/configs/ls1021atwr.h | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 0a0bb5f..6aeecda 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -235,9 +235,18 @@
 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
 #define FSL_QSPI_FLASH_NUM		2
 
+#define CONFIG_SPI_FLASH_STMICRO
+#endif
+
+/* DM SPI */
+#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+#define CONFIG_DM
+#define CONFIG_DM_SPI
 #define CONFIG_CMD_SF
+#define CONFIG_DM_SPI_FLASH
 #define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 #endif
 
 /*
-- 
1.9.1