[U-Boot] [PATCH] arm: imx: Switch Wandboard to use config_distro_bootcmd.h.

[Vagrant Cascadian]

This allows for more flexible and standardized boot across multiple
platforms. Remove most redundant legacy boot environment.

Cc: Otavio Salvador <otavio at ossystems.com.br>
Signed-off-by: Vagrant Cascadian <vagrant at debian.org>
---

 include/configs/wandboard.h | 139 ++++++--------------------------------------
 1 file changed, 17 insertions(+), 122 deletions(-)

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index b586803..b4cb9db 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -51,8 +51,6 @@
 #define CONFIG_CMD_BMODE
 #define CONFIG_CMD_SETEXPR
 
-#define CONFIG_BOOTDELAY		5
-
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
 #define CONFIG_LOADADDR			0x12000000
@@ -74,9 +72,6 @@
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 
 /* USB Configs */
 #define CONFIG_CMD_USB
@@ -131,131 +126,34 @@
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=zImage\0" \
 	"console=ttymxc0\0" \
-	"splashpos=m,m\0" \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdt_addr_r=0x18000000\0"     \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"fdt_addr=0x18000000\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
-	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-	"update_sd_firmware_filename=u-boot.imx\0" \
-	"update_sd_firmware=" \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"if mmc dev ${mmcdev}; then "	\
-			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
-				"setexpr fw_sz ${filesize} / 0x200; " \
-				"setexpr fw_sz ${fw_sz} + 1; "	\
-				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-			"fi; "	\
-		"fi\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}; run videoargs\0" \
-	"videoargs=" \
-		"setenv nextcon 0; " \
-		"if hdmidet; then " \
-			"setenv bootargs ${bootargs} " \
-				"video=mxcfb${nextcon}:dev=hdmi,1280x720M at 60," \
-					"if=RGB24; " \
-			"setenv fbmen fbmem=28M; " \
-			"setexpr nextcon ${nextcon} + 1; " \
-		"else " \
-			"echo - no HDMI monitor;" \
-		"fi; " \
-		"i2c dev 1; " \
-		"if i2c probe 0x10; then " \
-			"setenv bootargs ${bootargs} " \
-				"video=mxcfb${nextcon}:dev=lcd,800x480 at 60," \
-					"if=RGB666,bpp=32; " \
-			"if test 0 -eq ${nextcon}; then " \
-				"setenv fbmem fbmem=10M; " \
-			"else " \
-				"setenv fbmem ${fbmem},10M; " \
-			"fi; " \
-			"setexpr nextcon ${nextcon} + 1; " \
-		"else " \
-			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
-		"fi; " \
-		"setenv bootargs ${bootargs} ${fbmem}\0" \
-	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-		"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"pxe_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"ramdisk_addr_r=0x13000000\0" \
+	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
+	func(USB, usb, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_defaults.h>
+#include <config_distro_bootcmd.h>
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS	       16
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_CMDLINE_EDITING
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
@@ -278,9 +176,6 @@
 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
 #ifndef CONFIG_SYS_DCACHE_OFF
 #define CONFIG_CMD_CACHE
 #endif
-- 
2.1.4