[U-Boot] [PATCH 2/3] sunxi: promote CONFIG_CLK_FULL_SPEED to be selectable through Kconfig

[Iain Paton]

On 27/03/15 13:57, Hans de Goede wrote:
> Hi,
> 
> On 27-03-15 01:12, Iain Paton wrote:
>> in order to allow for this to be set differently per board, remove the
>> define from the associated soc headers and allow the user to choose a
>> value through a Kconfig setting
>>
>> Signed-off-by: Iain Paton <ipaton0 at gmail.com>
> 
> Thanks, but if we're going to do this, then can you please rename
> CLK_FULL_SPEED to SYS_CLK_FREQ, as that is already defined in
> 
> ./Kconfig

Sure thing, I'd missed that there was already a suitable variable.
Updated version on the way.

Rgds,
Iain