[U-Boot] [PATCH v3 11/17] dm: regulator: add max77686 regulator driver
Simon Glass
sjg at chromium.org
Sun Mar 29 15:08:31 CEST 2015
Hi Przemyslaw,
On 24 March 2015 at 14:30, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
> This commit adds support to max77686 regulator driver
> based on a uclass regulator driver-model api, which
> provides implementation of all uclass regulator api
> function calls.
>
> New file: drivers/power/regulator/max77686.c
> New config: CONFIG_DM_REGULATOR_MAX77686
>
> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
Acked-by: Simon Glass <sjg at chromium.org>
See nit below.
> ---
> Changes V2:
> - change debug() to error()
> - code cleanup
> - fix data types
> - ldo/buck state implementation
> - adjust to new uclass api
>
> Changes V3:
> - regulator/max77686.c:
> -- adjust to api changes
> -- add separeted drivers for buck and ldo
> -- bind regulators by its compatibles
> - Kconfig: add regulator max77686 entry
> ---
> Makefile | 1 +
> drivers/power/Kconfig | 8 +
> drivers/power/Makefile | 1 -
> drivers/power/regulator/Makefile | 8 +
> drivers/power/regulator/max77686.c | 876 +++++++++++++++++++++++++++++++++++++
> include/power/max77686_pmic.h | 24 +-
> 6 files changed, 914 insertions(+), 4 deletions(-)
> create mode 100644 drivers/power/regulator/Makefile
> create mode 100644 drivers/power/regulator/max77686.c
>
> diff --git a/Makefile b/Makefile
> index 1b3ebe7..9ecf3bb 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -632,6 +632,7 @@ libs-y += drivers/power/ \
> drivers/power/fuel_gauge/ \
> drivers/power/mfd/ \
> drivers/power/pmic/ \
> + drivers/power/regulator/ \
> drivers/power/battery/
> libs-y += drivers/spi/
> libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> index c4d4c72..97abbf0 100644
> --- a/drivers/power/Kconfig
> +++ b/drivers/power/Kconfig
> @@ -112,6 +112,14 @@ config DM_REGULATOR
> Say y here to enable support for the axp221 / axp223 pmic found on most
> sun6i (A31) / sun8i (A23) boards.
>
> +config DM_REGULATOR_MAX77686
> + bool "Enable Driver Model for REGULATOR MAX77686"
> + depends on DM_REGULATOR && DM_PMIC_MAX77686
> + ---help---
> + This config enables implementation of driver-model regulator uclass
> + features for REGULATOR MAX77686. The driver implements get/set api for:
> + value, enable and mode.
This should probably go in drivers/power/regulator/Kconfig.
> +
> config AXP221_DCDC1_VOLT
> int "axp221 dcdc1 voltage"
> depends on AXP221_POWER
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index a6b7012..f206bdd 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -15,7 +15,6 @@ obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o
> obj-$(CONFIG_TWL4030_POWER) += twl4030.o
> obj-$(CONFIG_TWL6030_POWER) += twl6030.o
> obj-$(CONFIG_PALMAS_POWER) += palmas.o
> -
> obj-$(CONFIG_POWER) += power_core.o
> obj-$(CONFIG_DIALOG_POWER) += power_dialog.o
> obj-$(CONFIG_POWER_FSL) += power_fsl.o
> diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
> new file mode 100644
> index 0000000..9d282e3
> --- /dev/null
> +++ b/drivers/power/regulator/Makefile
> @@ -0,0 +1,8 @@
> +#
> +# Copyright (C) 2014 Samsung Electronics
> +# Przemyslaw Marczak <p.marczak at samsung.com>
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
> diff --git a/drivers/power/regulator/max77686.c b/drivers/power/regulator/max77686.c
> new file mode 100644
> index 0000000..496c70a
> --- /dev/null
> +++ b/drivers/power/regulator/max77686.c
> @@ -0,0 +1,876 @@
> +/*
> + * Copyright (C) 2012-2015 Samsung Electronics
> + *
> + * Rajeshwari Shinde <rajeshwari.s at samsung.com>
> + * Przemyslaw Marczak <p.marczak at samsung.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <fdtdec.h>
> +#include <i2c.h>
> +#include <dm.h>
> +#include <power/pmic.h>
> +#include <power/regulator.h>
> +#include <power/max77686_pmic.h>
> +#include <errno.h>
> +#include <dm.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define MODE(_id, _val, _name) { \
> + .id = _id, \
> + .register_value = _val, \
> + .name = _name, \
> +}
> +
> +/* LDO: 1,3,4,5,9,17,18,19,20,21,22,23,24,26,26,27 */
> +static struct dm_regulator_mode max77686_ldo_mode_standby1[] = {
> + MODE(OPMODE_OFF, MAX77686_LDO_MODE_OFF, "OFF"),
> + MODE(OPMODE_LPM, MAX77686_LDO_MODE_LPM, "LPM"),
> + MODE(OPMODE_STANDBY_LPM, MAX77686_LDO_MODE_STANDBY_LPM, "ON/LPM"),
> + MODE(OPMODE_ON, MAX77686_LDO_MODE_ON, "ON"),
> +};
> +
> +/* LDO: 2,6,7,8,10,11,12,14,15,16 */
> +static struct dm_regulator_mode max77686_ldo_mode_standby2[] = {
> + MODE(OPMODE_OFF, MAX77686_LDO_MODE_OFF, "OFF"),
> + MODE(OPMODE_STANDBY, MAX77686_LDO_MODE_STANDBY, "ON/OFF"),
> + MODE(OPMODE_STANDBY_LPM, MAX77686_LDO_MODE_STANDBY_LPM, "ON/LPM"),
> + MODE(OPMODE_ON, MAX77686_LDO_MODE_ON, "ON"),
> +};
> +
> +/* Buck: 1 */
> +static struct dm_regulator_mode max77686_buck_mode_standby[] = {
> + MODE(OPMODE_OFF, MAX77686_BUCK_MODE_OFF, "OFF"),
> + MODE(OPMODE_STANDBY, MAX77686_BUCK_MODE_STANDBY, "ON/OFF"),
> + MODE(OPMODE_ON, MAX77686_BUCK_MODE_ON, "ON"),
> +};
> +
> +/* Buck: 2,3,4 */
> +static struct dm_regulator_mode max77686_buck_mode_lpm[] = {
> + MODE(OPMODE_OFF, MAX77686_BUCK_MODE_OFF, "OFF"),
> + MODE(OPMODE_STANDBY, MAX77686_BUCK_MODE_STANDBY, "ON/OFF"),
> + MODE(OPMODE_LPM, MAX77686_BUCK_MODE_LPM, "LPM"),
> + MODE(OPMODE_ON, MAX77686_BUCK_MODE_ON, "ON"),
> +};
> +
> +/* Buck: 5,6,7,8,9 */
> +static struct dm_regulator_mode max77686_buck_mode_onoff[] = {
> + MODE(OPMODE_OFF, MAX77686_BUCK_MODE_OFF, "OFF"),
> + MODE(OPMODE_ON, MAX77686_BUCK_MODE_ON, "ON"),
> +};
> +
> +static const char max77686_buck_addr[] = {
> + 0xff, 0x10, 0x12, 0x1c, 0x26, 0x30, 0x32, 0x34, 0x36, 0x38
> +};
> +
> +static int max77686_buck_volt2hex(int buck, int uV)
> +{
> + unsigned int hex = 0;
> + unsigned int hex_max = 0;
> +
> + switch (buck) {
> + case 2:
> + case 3:
> + case 4:
> + /* hex = (uV - 600000) / 12500; */
> + hex = (uV - MAX77686_BUCK_UV_LMIN) / MAX77686_BUCK_UV_LSTEP;
> + hex_max = MAX77686_BUCK234_VOLT_MAX_HEX;
> + /**
> + * This uses voltage scaller - temporary not implemented
> + * so return just 0
> + */
> + return 0;
> + default:
> + /* hex = (uV - 750000) / 50000; */
> + hex = (uV - MAX77686_BUCK_UV_HMIN) / MAX77686_BUCK_UV_HSTEP;
> + hex_max = MAX77686_BUCK_VOLT_MAX_HEX;
> + break;
> + }
> +
> + if (hex >= 0 && hex <= hex_max)
> + return hex;
> +
> + error("Value: %d uV is wrong for BUCK%d", uV, buck);
> + return -EINVAL;
> +}
> +
> +static int max77686_buck_hex2volt(int buck, int hex)
> +{
> + unsigned uV = 0;
> + unsigned int hex_max = 0;
> +
> + if (hex < 0)
> + goto bad_hex;
> +
> + switch (buck) {
> + case 2:
> + case 3:
> + case 4:
> + hex_max = MAX77686_BUCK234_VOLT_MAX_HEX;
> + if (hex > hex_max)
> + goto bad_hex;
> +
> + /* uV = hex * 12500 + 600000; */
> + uV = hex * MAX77686_BUCK_UV_LSTEP + MAX77686_BUCK_UV_LMIN;
> + break;
> + default:
> + hex_max = MAX77686_BUCK_VOLT_MAX_HEX;
> + if (hex > hex_max)
> + goto bad_hex;
> +
> + /* uV = hex * 50000 + 750000; */
> + uV = hex * MAX77686_BUCK_UV_HSTEP + MAX77686_BUCK_UV_HMIN;
> + break;
> + }
> +
> + return uV;
> +
> +bad_hex:
> + error("Value: %#x is wrong for BUCK%d", hex, buck);
> + return -EINVAL;
> +}
> +
> +static int max77686_ldo_volt2hex(int ldo, int uV)
> +{
> + unsigned int hex = 0;
> +
> + switch (ldo) {
> + case 1:
> + case 2:
> + case 6:
> + case 7:
> + case 8:
> + case 15:
> + hex = (uV - MAX77686_LDO_UV_MIN) / MAX77686_LDO_UV_LSTEP;
> + /* hex = (uV - 800000) / 25000; */
> + break;
> + default:
> + hex = (uV - MAX77686_LDO_UV_MIN) / MAX77686_LDO_UV_HSTEP;
> + /* hex = (uV - 800000) / 50000; */
> + }
> +
> + if (hex >= 0 && hex <= MAX77686_LDO_VOLT_MAX_HEX)
> + return hex;
> +
> + error("Value: %d uV is wrong for LDO%d", uV, ldo);
> + return -EINVAL;
> +}
> +
> +static int max77686_ldo_hex2volt(int ldo, int hex)
> +{
> + unsigned int uV = 0;
> +
> + if (hex > MAX77686_LDO_VOLT_MAX_HEX)
> + goto bad_hex;
> +
> + switch (ldo) {
> + case 1:
> + case 2:
> + case 6:
> + case 7:
> + case 8:
> + case 15:
> + /* uV = hex * 25000 + 800000; */
> + uV = hex * MAX77686_LDO_UV_LSTEP + MAX77686_LDO_UV_MIN;
> + break;
> + default:
> + /* uV = hex * 50000 + 800000; */
> + uV = hex * MAX77686_LDO_UV_HSTEP + MAX77686_LDO_UV_MIN;
> + }
> +
> + return uV;
> +
> +bad_hex:
> + error("Value: %#x is wrong for ldo%d", hex, ldo);
> + return -EINVAL;
> +}
> +
> +static int max77686_ldo_hex2mode(int ldo, int hex)
> +{
> + if (hex > MAX77686_LDO_MODE_MASK)
> + return -EINVAL;
> +
> + switch (hex) {
> + case MAX77686_LDO_MODE_OFF:
> + return OPMODE_OFF;
> + case MAX77686_LDO_MODE_LPM: /* == MAX77686_LDO_MODE_STANDBY: */
> + /* The same mode values but different meaning for each ldo */
> + switch (ldo) {
> + case 2:
> + case 6:
> + case 7:
> + case 8:
> + case 10:
> + case 11:
> + case 12:
> + case 14:
> + case 15:
> + case 16:
> + return OPMODE_STANDBY;
> + default:
> + return OPMODE_LPM;
> + }
> + case MAX77686_LDO_MODE_STANDBY_LPM:
> + return OPMODE_STANDBY_LPM;
> + case MAX77686_LDO_MODE_ON:
> + return OPMODE_ON;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int max77686_buck_hex2mode(int buck, int hex)
> +{
> + if (hex > MAX77686_BUCK_MODE_MASK)
> + return -EINVAL;
> +
> + switch (hex) {
> + case MAX77686_BUCK_MODE_OFF:
> + return OPMODE_OFF;
> + case MAX77686_BUCK_MODE_ON:
> + return OPMODE_ON;
> + case MAX77686_BUCK_MODE_STANDBY:
> + switch (buck) {
> + case 1:
> + case 2:
> + case 3:
> + case 4:
> + return OPMODE_STANDBY;
> + default:
> + return -EINVAL;
> + }
> + case MAX77686_BUCK_MODE_LPM:
> + switch (buck) {
> + case 2:
> + case 3:
> + case 4:
> + return OPMODE_LPM;
> + default:
> + return -EINVAL;
> + }
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int max77686_buck_modes(int buck, struct dm_regulator_mode **modesp)
> +{
> + int ret = -EINVAL;
> +
> + if (buck < 1 || buck > MAX77686_BUCK_NUM)
> + return ret;
> +
> + switch (buck) {
> + case 1:
> + *modesp = max77686_buck_mode_standby;
> + ret = ARRAY_SIZE(max77686_buck_mode_standby);
> + case 2:
> + case 3:
> + case 4:
> + *modesp = max77686_buck_mode_lpm;
> + ret = ARRAY_SIZE(max77686_buck_mode_lpm);
> + default:
> + *modesp = max77686_buck_mode_onoff;
> + ret = ARRAY_SIZE(max77686_buck_mode_onoff);
> + }
> +
> + return ret;
> +}
> +
> +static int max77686_ldo_modes(int ldo, struct dm_regulator_mode **modesp)
> +{
> + int ret = -EINVAL;
> +
> + if (ldo < 1 || ldo > MAX77686_LDO_NUM)
> + return ret;
> +
> + switch (ldo) {
> + case 2:
> + case 6:
> + case 7:
> + case 8:
> + case 10:
> + case 11:
> + case 12:
> + case 14:
> + case 15:
> + case 16:
> + *modesp = max77686_ldo_mode_standby2;
> + ret = ARRAY_SIZE(max77686_ldo_mode_standby2);
> + default:
> + *modesp = max77686_ldo_mode_standby1;
> + ret = ARRAY_SIZE(max77686_ldo_mode_standby1);
> + }
> +
> + return ret;
> +}
> +
> +static int dev2num(struct udevice *dev)
> +{
> + return dev->of_id->data;
> +}
> +
> +static int max77686_ldo_val(struct udevice *dev, int op, int *uV)
> +{
> + unsigned int ret, hex, adr;
> + unsigned char val;
> + int ldo;
> +
> + if (op == PMIC_OP_GET)
> + *uV = 0;
> +
> + ldo = dev2num(dev);
> + if (ldo < 1 || ldo > MAX77686_LDO_NUM) {
> + error("Wrong ldo number: %d", ldo);
> + return -EINVAL;
> + }
> +
> + adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
> +
> + ret = pmic_read(dev->parent, adr, &val, 1);
> + if (ret)
> + return ret;
> +
> + if (op == PMIC_OP_GET) {
> + val &= MAX77686_LDO_VOLT_MASK;
> + ret = max77686_ldo_hex2volt(ldo, val);
> + if (ret < 0)
> + return ret;
> + *uV = ret;
> + return 0;
> + }
> +
> + hex = max77686_ldo_volt2hex(ldo, *uV);
> + if (hex < 0)
> + return -EINVAL;
> +
> + val &= ~MAX77686_LDO_VOLT_MASK;
> + val |= hex;
> + ret = pmic_write(dev->parent, adr, &val, 1);
> +
> + return ret;
> +}
> +
> +static int max77686_buck_val(struct udevice *dev, int op, int *uV)
> +{
> + unsigned int hex, ret, mask, adr;
> + unsigned char val;
> + int buck;
> +
> + buck = dev2num(dev);
> + if (buck < 1 || buck > MAX77686_BUCK_NUM) {
> + error("Wrong buck number: %d", buck);
> + return -EINVAL;
> + }
> +
> + if (op == PMIC_OP_GET)
> + *uV = 0;
> +
> + /* &buck_out = ctrl + 1 */
> + adr = max77686_buck_addr[buck] + 1;
> +
> + /* mask */
> + switch (buck) {
> + case 2:
> + case 3:
> + case 4:
> + /* Those uses voltage scallers - will support in the future */
> + mask = MAX77686_BUCK234_VOLT_MASK;
> + return -EPERM;
> + default:
> + mask = MAX77686_BUCK_VOLT_MASK;
> + }
> +
> + ret = pmic_read(dev->parent, adr, &val, 1);
> + if (ret)
> + return ret;
> +
> + if (op == PMIC_OP_GET) {
> + val &= mask;
> + ret = max77686_buck_hex2volt(buck, val);
> + if (ret < 0)
> + return ret;
> + *uV = ret;
> + return 0;
> + }
> +
> + hex = max77686_buck_volt2hex(buck, *uV);
> + if (hex < 0)
> + return -EINVAL;
> +
> + val &= ~mask;
> + val |= hex;
> + ret = pmic_write(dev->parent, adr, &val, 1);
> +
> + return ret;
> +}
> +
> +static int max77686_ldo_mode(struct udevice *dev, int op, int *opmode)
> +{
> + unsigned int ret, adr, mode;
> + unsigned char val;
> + int ldo;
> +
> + if (op == PMIC_OP_GET)
> + *opmode = -EINVAL;
> +
> + ldo = dev2num(dev);
> + if (ldo < 1 || ldo > MAX77686_LDO_NUM) {
> + error("Wrong ldo number: %d", ldo);
> + return -EINVAL;
> + }
> +
> + adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
> +
> + ret = pmic_read(dev->parent, adr, &val, 1);
> + if (ret)
> + return ret;
> +
> + if (op == PMIC_OP_GET) {
> + val &= MAX77686_LDO_MODE_MASK;
> + ret = max77686_ldo_hex2mode(ldo, val);
> + if (ret < 0)
> + return ret;
> + *opmode = ret;
> + return 0;
> + }
> +
> + /* mode */
> + switch (*opmode) {
> + case OPMODE_OFF:
> + mode = MAX77686_LDO_MODE_OFF;
> + break;
> + case OPMODE_LPM:
> + switch (ldo) {
> + case 2:
> + case 6:
> + case 7:
> + case 8:
> + case 10:
> + case 11:
> + case 12:
> + case 14:
> + case 15:
> + case 16:
> + return -EINVAL;
> + default:
> + mode = MAX77686_LDO_MODE_LPM;
> + }
> + break;
> + case OPMODE_STANDBY:
> + switch (ldo) {
> + case 2:
> + case 6:
> + case 7:
> + case 8:
> + case 10:
> + case 11:
> + case 12:
> + case 14:
> + case 15:
> + case 16:
> + mode = MAX77686_LDO_MODE_STANDBY;
> + break;
> + default:
> + return -EINVAL;
> + }
> + break;
> + case OPMODE_STANDBY_LPM:
> + mode = MAX77686_LDO_MODE_STANDBY_LPM;
> + break;
> + case OPMODE_ON:
> + mode = MAX77686_LDO_MODE_ON;
> + break;
> + default:
> + mode = 0xff;
> + }
> +
> + if (mode == 0xff) {
> + error("Wrong mode: %d for ldo%d", *opmode, ldo);
> + return -EINVAL;
> + }
> +
> + val &= ~MAX77686_LDO_MODE_MASK;
> + val |= mode;
> + ret = pmic_write(dev->parent, adr, &val, 1);
> +
> + return ret;
> +}
> +
> +static int max77686_ldo_enable(struct udevice *dev, int op, bool *enable)
> +{
> + int ret, on_off;
> +
> + if (op == PMIC_OP_GET) {
> + ret = max77686_ldo_mode(dev, op, &on_off);
> + if (ret)
> + return ret;
> +
> + switch (on_off) {
> + case OPMODE_OFF:
> + *enable = 0;
> + break;
> + case OPMODE_ON:
> + *enable = 1;
> + break;
> + default:
> + return -EINVAL;
> + }
> + } else if (op == PMIC_OP_SET) {
> + switch (*enable) {
> + case 0:
> + on_off = OPMODE_OFF;
> + break;
> + case 1:
> + on_off = OPMODE_ON;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + ret = max77686_ldo_mode(dev, op, &on_off);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int max77686_buck_mode(struct udevice *dev, int op, int *opmode)
> +{
> + unsigned int ret, mask, adr, mode, mode_shift;
> + unsigned char val;
> + int buck;
> +
> + buck = dev2num(dev);
> + if (buck < 1 || buck > MAX77686_BUCK_NUM) {
> + error("Wrong buck number: %d", buck);
> + return -EINVAL;
> + }
> +
> + adr = max77686_buck_addr[buck];
> +
> + /* mask */
> + switch (buck) {
> + case 2:
> + case 3:
> + case 4:
> + mode_shift = MAX77686_BUCK_MODE_SHIFT_2;
> + break;
> + default:
> + mode_shift = MAX77686_BUCK_MODE_SHIFT_1;
> + }
> +
> + mask = MAX77686_BUCK_MODE_MASK << mode_shift;
> +
> + ret = pmic_read(dev->parent, adr, &val, 1);
> + if (ret)
> + return ret;
> +
> + if (op == PMIC_OP_GET) {
> + val &= mask;
> + val >>= mode_shift;
> + ret = max77686_buck_hex2mode(buck, val);
> + if (ret < 0)
> + return ret;
> + *opmode = ret;
> + return 0;
> + }
> +
> + /* mode */
> + switch (*opmode) {
> + case OPMODE_OFF:
> + mode = MAX77686_BUCK_MODE_OFF;
> + break;
> + case OPMODE_STANDBY:
> + switch (buck) {
> + case 1:
> + case 2:
> + case 3:
> + case 4:
> + mode = MAX77686_BUCK_MODE_STANDBY << mode_shift;
> + break;
> + default:
> + mode = 0xff;
> + }
> + break;
> + case OPMODE_LPM:
> + switch (buck) {
> + case 2:
> + case 3:
> + case 4:
> + mode = MAX77686_BUCK_MODE_LPM << mode_shift;
> + break;
> + default:
> + mode = 0xff;
> + }
> + break;
> + case OPMODE_ON:
> + mode = MAX77686_BUCK_MODE_ON << mode_shift;
> + break;
> + default:
> + mode = 0xff;
> + }
> +
> + if (mode == 0xff) {
> + error("Wrong mode: %d for buck: %d\n", *opmode, buck);
> + return -EINVAL;
> + }
> +
> + val &= ~mask;
> + val |= mode;
> + ret = pmic_write(dev->parent, adr, &val, 1);
> +
> + return ret;
> +}
> +
> +static int max77686_buck_enable(struct udevice *dev, int op, bool *enable)
> +{
> + int ret, on_off;
> +
> + if (op == PMIC_OP_GET) {
> + ret = max77686_buck_mode(dev, op, &on_off);
> + if (ret)
> + return ret;
> +
> + switch (on_off) {
> + case OPMODE_OFF:
> + *enable = false;
> + break;
> + case OPMODE_ON:
> + *enable = true;
> + break;
> + default:
> + return -EINVAL;
> + }
> + } else if (op == PMIC_OP_SET) {
> + switch (*enable) {
> + case 0:
> + on_off = OPMODE_OFF;
> + break;
> + case 1:
> + on_off = OPMODE_ON;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + ret = max77686_buck_mode(dev, op, &on_off);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int max77686_ldo_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct dm_regulator_info *info = dev->uclass_priv;
> + int ret;
> +
> + ret = regulator_ofdata_to_platdata(dev);
> + if (ret)
> + return ret;
> +
> + info->type = REGULATOR_TYPE_LDO;
> + info->mode_count = max77686_ldo_modes(dev2num(dev), &info->mode);
> +
> + return 0;
> +}
> +
> +static int ldo_get_value(struct udevice *dev)
> +{
> + int uV;
> + int ret;
> +
> + ret = max77686_ldo_val(dev, PMIC_OP_GET, &uV);
> + if (ret)
> + return ret;
> +
> + return uV;
> +}
> +
> +static int ldo_set_value(struct udevice *dev, int uV)
> +{
> + return max77686_ldo_val(dev, PMIC_OP_SET, &uV);
> +}
> +
> +static bool ldo_get_enable(struct udevice *dev)
> +{
> + bool enable = false;
> + int ret;
> +
> + ret = max77686_ldo_enable(dev, PMIC_OP_GET, &enable);
> + if (ret)
> + return ret;
> +
> + return enable;
> +}
> +
> +static int ldo_set_enable(struct udevice *dev, bool enable)
> +{
> + return max77686_ldo_enable(dev, PMIC_OP_SET, &enable);
> +}
> +
> +static int ldo_get_mode(struct udevice *dev)
> +{
> + int mode;
> + int ret;
> +
> + ret = max77686_ldo_mode(dev, PMIC_OP_GET, &mode);
> + if (ret)
> + return ret;
> +
> + return mode;
> +}
> +
> +static int ldo_set_mode(struct udevice *dev, int mode)
> +{
> + return max77686_ldo_mode(dev, PMIC_OP_SET, &mode);
> +}
> +
> +static int max77686_buck_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct dm_regulator_info *info = dev->uclass_priv;
> + int ret;
> +
> + ret = regulator_ofdata_to_platdata(dev);
> + if (ret)
> + return ret;
> +
> + info->type = REGULATOR_TYPE_BUCK;
> + info->mode_count = max77686_buck_modes(dev2num(dev), &info->mode);
> +
> + return 0;
> +}
> +
> +static int buck_get_value(struct udevice *dev)
> +{
> + int uV;
> + int ret;
> +
> + ret = max77686_buck_val(dev, PMIC_OP_GET, &uV);
> + if (ret)
> + return ret;
> +
> + return uV;
> +}
> +
> +static int buck_set_value(struct udevice *dev, int uV)
> +{
> + return max77686_buck_val(dev, PMIC_OP_SET, &uV);
> +}
> +
> +static bool buck_get_enable(struct udevice *dev)
> +{
> + bool enable = false;
> + int ret;
> +
> + ret = max77686_buck_enable(dev, PMIC_OP_GET, &enable);
> + if (ret)
> + return ret;
> +
> + return enable;
> +}
> +
> +static int buck_set_enable(struct udevice *dev, bool enable)
> +{
> + return max77686_buck_enable(dev, PMIC_OP_SET, &enable);
> +}
> +
> +static int buck_get_mode(struct udevice *dev)
> +{
> + int mode;
> + int ret;
> +
> + ret = max77686_buck_mode(dev, PMIC_OP_GET, &mode);
> + if (ret)
> + return ret;
> +
> + return mode;
> +}
> +
> +static int buck_set_mode(struct udevice *dev, int mode)
> +{
> + return max77686_buck_mode(dev, PMIC_OP_SET, &mode);
> +}
> +
> +static const struct dm_regulator_ops max77686_ldo_ops = {
> + .get_value = ldo_get_value,
> + .set_value = ldo_set_value,
> + .get_enable = ldo_get_enable,
> + .set_enable = ldo_set_enable,
> + .get_mode = ldo_get_mode,
> + .set_mode = ldo_set_mode,
> +};
> +
> +static const struct udevice_id max77686_ldo_ids[] = {
> + { .compatible = "LDO1", .data = 1 },
> + { .compatible = "LDO2", .data = 2 },
> + { .compatible = "LDO3", .data = 3 },
> + { .compatible = "LDO4", .data = 4 },
> + { .compatible = "LDO5", .data = 5 },
> + { .compatible = "LDO6", .data = 6 },
> + { .compatible = "LDO7", .data = 7 },
> + { .compatible = "LDO8", .data = 8 },
> + { .compatible = "LDO9", .data = 9 },
> + { .compatible = "LDO10", .data = 10 },
> + { .compatible = "LDO11", .data = 11 },
> + { .compatible = "LDO12", .data = 12 },
> + { .compatible = "LDO13", .data = 13 },
> + { .compatible = "LDO14", .data = 14 },
> + { .compatible = "LDO15", .data = 15 },
> + { .compatible = "LDO16", .data = 16 },
> + { .compatible = "LDO17", .data = 17 },
> + { .compatible = "LDO18", .data = 18 },
> + { .compatible = "LDO19", .data = 19 },
> + { .compatible = "LDO20", .data = 20 },
> + { .compatible = "LDO21", .data = 21 },
> + { .compatible = "LDO22", .data = 22 },
> + { .compatible = "LDO23", .data = 23 },
> + { .compatible = "LDO24", .data = 24 },
> + { .compatible = "LDO25", .data = 25 },
> + { .compatible = "LDO26", .data = 26 },
> + { },
> +};
> +
> +U_BOOT_DRIVER(max77686_ldo) = {
> + .name = "max77686 ldo",
> + .id = UCLASS_REGULATOR,
> + .ops = &max77686_ldo_ops,
> + .of_match = max77686_ldo_ids,
> + .ofdata_to_platdata = max77686_ldo_ofdata_to_platdata,
> +};
> +
> +static const struct dm_regulator_ops max77686_buck_ops = {
> + .get_value = buck_get_value,
> + .set_value = buck_set_value,
> + .get_enable = buck_get_enable,
> + .set_enable = buck_set_enable,
> + .get_mode = buck_get_mode,
> + .set_mode = buck_set_mode,
> +};
> +
> +static const struct udevice_id max77686_buck_ids[] = {
> + { .compatible = "BUCK1", .data = 1 },
> + { .compatible = "BUCK2", .data = 2 },
> + { .compatible = "BUCK3", .data = 3 },
> + { .compatible = "BUCK4", .data = 4 },
> + { .compatible = "BUCK5", .data = 5 },
> + { .compatible = "BUCK6", .data = 6 },
> + { .compatible = "BUCK7", .data = 7 },
> + { .compatible = "BUCK8", .data = 8 },
> + { .compatible = "BUCK9", .data = 9 },
> + { },
> +};
> +
> +U_BOOT_DRIVER(max77686_buck) = {
> + .name = "max77686 buck",
> + .id = UCLASS_REGULATOR,
> + .ops = &max77686_buck_ops,
> + .of_match = max77686_buck_ids,
> + .ofdata_to_platdata = max77686_buck_ofdata_to_platdata,
> +};
> diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h
> index fe26d13..81c27d8 100644
> --- a/include/power/max77686_pmic.h
> +++ b/include/power/max77686_pmic.h
> @@ -126,7 +126,10 @@ enum {
> };
>
> /* I2C device address for pmic max77686 */
> -#define MAX77686_I2C_ADDR (0x12 >> 1)
> +#define MAX77686_I2C_ADDR (0x12 >> 1)
> +#define MAX77686_LDO_NUM 26
> +#define MAX77686_BUCK_NUM 9
> +#define MAX77686_DESC_NUM (MAX77686_LDO_NUM + MAX77686_BUCK_NUM)
>
> enum {
> REG_DISABLE = 0,
> @@ -143,23 +146,29 @@ enum {
>
> enum {
> OPMODE_OFF = 0,
> - OPMODE_STANDBY,
> OPMODE_LPM,
> + OPMODE_STANDBY,
> + OPMODE_STANDBY_LPM,
> OPMODE_ON,
> };
>
> +#ifdef CONFIG_POWER
> int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV);
> int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode);
> int max77686_set_buck_voltage(struct pmic *p, int buck, ulong uV);
> int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
> +#endif
>
> #define MAX77686_LDO_VOLT_MAX_HEX 0x3f
> #define MAX77686_LDO_VOLT_MASK 0x3f
> #define MAX77686_LDO_MODE_MASK 0xc0
> #define MAX77686_LDO_MODE_OFF (0x00 << 0x06)
> +#define MAX77686_LDO_MODE_LPM (0x01 << 0x06)
> #define MAX77686_LDO_MODE_STANDBY (0x01 << 0x06)
> -#define MAX77686_LDO_MODE_LPM (0x02 << 0x06)
> +#define MAX77686_LDO_MODE_STANDBY_LPM (0x02 << 0x06)
> #define MAX77686_LDO_MODE_ON (0x03 << 0x06)
> +#define MAX77686_BUCK234_VOLT_MAX_HEX 0xff
> +#define MAX77686_BUCK234_VOLT_MASK 0xff
> #define MAX77686_BUCK_VOLT_MAX_HEX 0x3f
> #define MAX77686_BUCK_VOLT_MASK 0x3f
> #define MAX77686_BUCK_MODE_MASK 0x03
> @@ -170,6 +179,15 @@ int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
> #define MAX77686_BUCK_MODE_LPM 0x02
> #define MAX77686_BUCK_MODE_ON 0x03
>
> +/* For regulator hex<->volt conversion */
> +#define MAX77686_LDO_UV_MIN 800000 /* Minimum LDO uV value */
> +#define MAX77686_LDO_UV_LSTEP 25000 /* uV lower value step */
> +#define MAX77686_LDO_UV_HSTEP 50000 /* uV higher value step */
> +#define MAX77686_BUCK_UV_LMIN 600000 /* Lower minimun BUCK value */
> +#define MAX77686_BUCK_UV_HMIN 750000 /* Higher minimun BUCK value */
> +#define MAX77686_BUCK_UV_LSTEP 12500 /* uV lower value step */
> +#define MAX77686_BUCK_UV_HSTEP 50000 /* uV higher value step */
> +
> /* Buck1 1 volt value */
> #define MAX77686_BUCK1OUT_1V 0x5
> /* Buck1 1.05 volt value */
> --
> 1.9.1
>
Regards,
Simon
More information about the U-Boot
mailing list