[U-Boot] [PATCH 1/4] sunxi: musb: Fix some lo speed devices not working with musb host

Paul Kocialkowski contact at paulk.fr
Mon Mar 30 15:27:46 CEST 2015


Le vendredi 27 mars 2015 à 22:06 +0100, Hans de Goede a écrit :
> The usb0 / otg phy on sunxi boards has a bug where it wrongly detects a
> high speed squelch on usb reset deassert when a lo speed device is plugged in.
> 
> The android kernel has a work around for this in the form of temporary
> disabling the phy's squelch detection on reset deassert, this commit adds
> the same workaround to the u-boot sunxi musb code, thereby fixing various usb
> lo speed devices not working.
> 
> Tested with a (before non working) usb keyboard and a usb 2.4 GHz wireless
> keyboard/mouse combo receiver.

This also made my USB low speed keyboard work with U-Boot, but I'm
getting the following message after USB init:
musb_h_ep0_irq 1069: no URB for end 0

In addition, enabling caps lock or num lock (which should trigger a LED)
makes the keyboard stop working until I reset the board. On an USB2
keyboard, caps lock and num lock work just fine.

I'll try to investigate that when I have time, thanks for working on
this!

> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>  arch/arm/cpu/armv7/sunxi/usbc.c        |  7 +++++++
>  arch/arm/include/asm/arch-sunxi/usbc.h |  1 +
>  drivers/usb/musb-new/musb_uboot.c      | 14 ++++++++++++++
>  3 files changed, 22 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv7/sunxi/usbc.c b/arch/arm/cpu/armv7/sunxi/usbc.c
> index d2d9891..1c777aa 100644
> --- a/arch/arm/cpu/armv7/sunxi/usbc.c
> +++ b/arch/arm/cpu/armv7/sunxi/usbc.c
> @@ -182,6 +182,13 @@ static void sunxi_usb_passby(struct sunxi_usbc_hcd *sunxi_usbc, int enable)
>  	return;
>  }
>  
> +void sunxi_usbc_enable_squelch_detect(int index, int enable)
> +{
> +	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
> +
> +	usb_phy_write(sunxi_usbc, 0x3c, enable ? 0 : 2, 2);
> +}
> +
>  int sunxi_usbc_request_resources(int index)
>  {
>  	struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index];
> diff --git a/arch/arm/include/asm/arch-sunxi/usbc.h b/arch/arm/include/asm/arch-sunxi/usbc.h
> index 67281ec..ab0f272 100644
> --- a/arch/arm/include/asm/arch-sunxi/usbc.h
> +++ b/arch/arm/include/asm/arch-sunxi/usbc.h
> @@ -21,3 +21,4 @@ void sunxi_usbc_disable(int index);
>  void sunxi_usbc_vbus_enable(int index);
>  void sunxi_usbc_vbus_disable(int index);
>  int sunxi_usbc_vbus_detect(int index);
> +void sunxi_usbc_enable_squelch_detect(int index, int enable);
> diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c
> index 6e58ddf..51fb3fd 100644
> --- a/drivers/usb/musb-new/musb_uboot.c
> +++ b/drivers/usb/musb-new/musb_uboot.c
> @@ -1,5 +1,8 @@
>  #include <common.h>
>  #include <watchdog.h>
> +#ifdef CONFIG_ARCH_SUNXI
> +#include <asm/arch/usbc.h>
> +#endif
>  #include <asm/errno.h>
>  #include <linux/usb/ch9.h>
>  #include <linux/usb/gadget.h>
> @@ -186,8 +189,19 @@ void usb_reset_root_port(void)
>  	power &= 0xf0;
>  	musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power);
>  	mdelay(50);
> +#ifdef CONFIG_ARCH_SUNXI
> +	/*
> +	 * sunxi phy has a bug and it will wrongly detect high speed squelch
> +	 * when clearing reset on low-speed devices, temporary disable
> +	 * squelch detection to work around this.
> +	 */
> +	sunxi_usbc_enable_squelch_detect(0, 0);
> +#endif
>  	power = musb_readb(mbase, MUSB_POWER);
>  	musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power);
> +#ifdef CONFIG_ARCH_SUNXI
> +	sunxi_usbc_enable_squelch_detect(0, 1);
> +#endif
>  	host->isr(0, host);
>  	host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ?
>  			USB_SPEED_HIGH :

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150330/4be7c767/attachment.sig>


More information about the U-Boot mailing list