[U-Boot] [PATCH v2 1/7] arc: cache - build invalidate_icache_all() and invalidate_dcache_all() always

[Alexey Brodkin]

Make both invalidate_icache_all() and invalidate_dcache_all() available
even if U-Boot is configured with CONFIG_SYS_DCACHE_OFF and/or
CONFIG_SYS_ICACHE_OFF.

This is useful because configuration of U-Boot may not match actual
hardware features. Real board may have cache(s) but for some reason we
may want to run U-Boot with cache(s) disabled (for example if some
peripherals work improperly with existing drivers if data cache is
enabled). So board may start with cache(s) enabled (that's the case for
ARC cores with built-in caches) but early in U-Boot we disable cache(s)
and make sure all contents of data cache gets flushed in RAM.

Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
---
Changes in v2:
 * This patch was introduced in v2 only
---
 arch/arc/lib/cache.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arc/lib/cache.c b/arch/arc/lib/cache.c
index a227723..30f045a 100644
--- a/arch/arc/lib/cache.c
+++ b/arch/arc/lib/cache.c
@@ -49,10 +49,12 @@ void icache_disable(void)
 
 void invalidate_icache_all(void)
 {
-#ifndef CONFIG_SYS_ICACHE_OFF
+	/* If no cache in CPU exit immediately */
+	if (!(read_aux_reg(ARC_BCR_IC_BUILD) & CACHE_VER_NUM_MASK))
+		return;
+
 	/* Any write to IC_IVIC register triggers invalidation of entire I$ */
 	write_aux_reg(ARC_AUX_IC_IVIC, 1);
-#endif /* CONFIG_SYS_ICACHE_OFF */
 }
 
 int dcache_status(void)
@@ -156,10 +158,12 @@ void invalidate_dcache_range(unsigned long start, unsigned long end)
 
 void invalidate_dcache_all(void)
 {
-#ifndef CONFIG_SYS_DCACHE_OFF
+	/* If no cache in CPU exit immediately */
+	if (!(read_aux_reg(ARC_BCR_DC_BUILD) & CACHE_VER_NUM_MASK))
+		return;
+
 	/* Write 1 to DC_IVDC register triggers invalidation of entire D$ */
 	write_aux_reg(ARC_AUX_DC_IVDC, 1);
-#endif /* CONFIG_SYS_DCACHE_OFF */
 }
 
 void flush_cache(unsigned long start, unsigned long size)
-- 
2.1.0