[U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
sbabic at denx.de
Tue Mar 31 15:48:34 CEST 2015
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit 21866c34a1b4098a8868c9250daf01baf84c2397:
at91sam9rlek_mmc_defconfig: Add CONFIG_ARCH_AT91=y (2015-03-20
10:47:38 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 5cab874052614fb130cd9b16fc6a3d27cae0741e:
watchdog/imx_watchdog: do not set WCR_WDW (2015-03-25 16:52:16 +0100)
----------------------------------------------------------------
Boris BREZILLON (3):
ARM: mx6: move to a standard arch/board approach
ARM: iMX: define an IMX_CONFIG Kconfig option
board/seco: Add mx6q-uq7 basic board support
Peng Fan (2):
imx:mx6dlsabresd fix error detecting thermal
imx:mx6slevk support reading temperature
Sebastian Siewior (1):
watchdog/imx_watchdog: do not set WCR_WDW
arch/arm/Kconfig | 8 ++
arch/arm/cpu/armv7/mx6/Kconfig | 42 +++++++++
arch/arm/imx-common/Kconfig | 2 +
board/seco/Kconfig | 63 ++++++++++++++
board/seco/common/Makefile | 2 +
board/seco/common/mx6.c | 138 ++++++++++++++++++++++++++++++
board/seco/common/mx6.h | 9 ++
board/seco/mx6quq7/MAINTAINERS | 6 ++
board/seco/mx6quq7/Makefile | 7 ++
board/seco/mx6quq7/mx6quq7-2g.cfg | 173
++++++++++++++++++++++++++++++++++++++
board/seco/mx6quq7/mx6quq7.c | 162 +++++++++++++++++++++++++++++++++++
configs/mx6dlsabresd_defconfig | 2 +
configs/mx6slevk_defconfig | 4 +
configs/mx6slevk_spinor_defconfig | 4 +
configs/secomx6quq7_defconfig | 7 ++
drivers/watchdog/imx_watchdog.c | 3 +-
include/configs/mx6slevk.h | 7 ++
include/configs/secomx6quq7.h | 166
++++++++++++++++++++++++++++++++++++
18 files changed, 803 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/cpu/armv7/mx6/Kconfig
create mode 100644 arch/arm/imx-common/Kconfig
create mode 100644 board/seco/Kconfig
create mode 100644 board/seco/common/Makefile
create mode 100644 board/seco/common/mx6.c
create mode 100644 board/seco/common/mx6.h
create mode 100644 board/seco/mx6quq7/MAINTAINERS
create mode 100644 board/seco/mx6quq7/Makefile
create mode 100644 board/seco/mx6quq7/mx6quq7-2g.cfg
create mode 100644 board/seco/mx6quq7/mx6quq7.c
create mode 100644 configs/secomx6quq7_defconfig
create mode 100644 include/configs/secomx6quq7.h
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list