[U-Boot] [PATCHv3 16/17] arm: socfpga: remove the need to map sdram in arch_early_init

[Pavel Machek]

On Mon 2015-03-30 17:01:17, dinguyen at opensource.altera.com wrote:
> From: Dinh Nguyen <dinguyen at opensource.altera.com>
> 
> Since we are already mapping sdram 0x0 in board_init_f, we can remove it
> here.
> 
> Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
> Reviewed-by: Marek Vasut <marex at denx.de>

Yes, and you want to merge this to the patch that does that.

Also.. what about that "VIRTUAL_TARGET" ifdef? Should not the remap be
done in the same place for both?

Reviewed-by: Pavel Machek <pavel at denx.de>

> ---
>  arch/arm/cpu/armv7/socfpga/misc.c | 3 ---
>  1 file changed, 3 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c
> index 7873c38..3cee6ff 100644
> --- a/arch/arm/cpu/armv7/socfpga/misc.c
> +++ b/arch/arm/cpu/armv7/socfpga/misc.c
> @@ -205,9 +205,6 @@ int arch_early_init_r(void)
>  	/* Configure the L2 controller to make SDRAM start at 0 */
>  #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
>  	writel(0x2, &nic301_regs->remap);
> -#else
> -	writel(0x1, &nic301_regs->remap);	/* remap.mpuzero */
> -	writel(0x1, &pl310->pl310_addr_filter_start);
>  #endif
>  
>  	/* Add device descriptor to FPGA device table */

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html