[U-Boot] [PATCH 2/2] stv0991: use fdt for serial port platform data

[Simon Glass]

On 1 May 2015 at 16:43, Vikas Manocha <vikas.manocha at st.com> wrote:
> Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
> ---
>  board/st/stv0991/stv0991.c |    2 ++
>  1 file changed, 2 insertions(+)

Needs a commit message. With that:

Reviewed-by: Simon Glass <sjg at chromium.org>

>
> diff --git a/board/st/stv0991/stv0991.c b/board/st/stv0991/stv0991.c
> index 38f6e1d..09f973f 100644
> --- a/board/st/stv0991/stv0991.c
> +++ b/board/st/stv0991/stv0991.c
> @@ -21,6 +21,7 @@ DECLARE_GLOBAL_DATA_PTR;
>  struct gpio_regs *const gpioa_regs =
>                 (struct gpio_regs *) GPIOA_BASE_ADDR;
>
> +#ifndef CONFIG_OF_CONTROL
>  static const struct pl01x_serial_platdata serial_platdata = {
>         .base = 0x80406000,
>         .type = TYPE_PL011,
> @@ -31,6 +32,7 @@ U_BOOT_DEVICE(stv09911_serials) = {
>         .name = "serial_pl01x",
>         .platdata = &serial_platdata,
>  };
> +#endif
>
>  #ifdef CONFIG_SHOW_BOOT_PROGRESS
>  void show_boot_progress(int progress)
> --
> 1.7.9.5
>