[U-Boot] mx6cuboxi: PHY/FEC detection

[Stefano Babic]

Hi Fabio, Vagrant,

On 02/05/2015 02:07, Vagrant Cascadian wrote:
> On 2015-05-01, Fabio Estevam wrote:
>> On Fri, May 1, 2015 at 5:20 PM, Fabio Estevam <festevam at gmail.com> wrote:
>>
>>> Looking at Solid-run's tree they have the following commit that may be
>>> related to this PHY issue:
>>
>> I applied Rabeeh's patch on top of this v2 series and generated the
>> two attached patches.
>>
>> Could you please give them a try and let us know if it fixes the
>> Ethernet PHY detect issue?
> 
> After some brief testing with these two patches, it seems to be
> working. After trying various methods (cold boot, reset from u-boot
> prompt several consecutive times, reboot from linux several times), it
> seems to consistantly detect the PHY.
> 

Good work ! I apply V2, then. Can you also send to a ML the two
additional patches from your previous e-mail ? They are not tracked
properly by patchwork.

Thanks,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================