[U-Boot] [PATCH 2/2] mx6cuboxi: Pull down PAD_ENET_RXD0/RXD1

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

Configure PAD_ENET_RXD0/RXD1 pads as pull down because these pads are directly
connected to the Atheros 8035/8030 although they should be functional
only in the RMII mode - 8030.

Signed-off-by: Rabeeh Khoury <rabeeh at solid-run.com>
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index ff018e1..8fb6004 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -134,6 +134,8 @@ static iomux_v3_cfg_t const enet_pads[] = {
 	IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 	IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 	IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
+	IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
+	IOMUX_PADS(PAD_ENET_RXD1__GPIO1_IO26 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)),
 };
 
 static void setup_iomux_enet(void)
-- 
1.9.1