[U-Boot] [PATCH v2 2/2] mx6cuboxi: Pull down PAD_ENET_RXD0/RXD1

[Stefano Babic]

Hi Fabio,

On 04/05/2015 16:22, Fabio Estevam wrote:
> Configure PAD_ENET_RXD0/RXD1 pads as pull down because these pads are directly
> connected to the Atheros 8035/8030 although they should be functional
> only in the RMII mode - 8030.
> 
> Signed-off-by: Rabeeh Khoury <rabeeh at solid-run.com>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---


Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================