[U-Boot] [PATCH] ARM: BeagleBoard-x15: Rev A2x5: Change UART3 mux

[Lokesh Vutla]

UART3 RX and TX pins are now moved to support uart download capability
on the platform. Old pins are now GPIOs routed to expansion ports.
All original boards should either have been returned for modifications
or already modified for the required change and maintaining
compatibility for older boards are no longer needed.

Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
 board/ti/beagle_x15/mux_data.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/ti/beagle_x15/mux_data.h b/board/ti/beagle_x15/mux_data.h
index 2294abe..df658c5 100644
--- a/board/ti/beagle_x15/mux_data.h
+++ b/board/ti/beagle_x15/mux_data.h
@@ -31,8 +31,8 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
 	{GPMC_A26, (IEN | PTU | PDIS | M1)},	/* mmc2_dat2 */
 	{GPMC_A27, (IEN | PTU | PDIS | M1)},	/* mmc2_dat3 */
 	{GPMC_CS1, (IEN | PTU | PDIS | M1)},	/* mmm2_cmd */
-	{UART3_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_RXD */
-	{UART3_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_TXD */
+	{UART2_CTSN, (FSC | IEN | PTU | PDIS | M2)}, /* uart2_ctsn.uart3_rxd */
+	{UART2_RTSN, (FSC | IEN | PTU | PDIS | M1)}, /* uart2_rtsn.uart3_txd */
 	{I2C1_SDA, (IEN | PTU | PDIS | M0)},	/* I2C1_SDA */
 	{I2C1_SCL, (IEN | PTU | PDIS | M0)},	/* I2C1_SCL */
 	{MDIO_MCLK, (PTU | PEN | M0)},		/* MDIO_MCLK  */
-- 
1.9.1