[U-Boot] [PATCH 4/4] ARM: bcm283x: Switch to generic timer

[Marek Vasut]

On Friday, May 08, 2015 at 06:06:41 PM, Stephen Warren wrote:
[...]

> > * Obtain lease
> > * Transfer kernel, dtb, ramdisk without stalling/timing out
> > * Do this 10 times in a row with a power cycle in between
> > 
> > Hope this help clarify the situation in some way,
> 
> OK, but if you apply Marek's change to replace the timer implementation
> with the one in lib/time.c, does that reliably fix the issue when tested
> over a large number of runs with/without that change? With the current
> explanation, I can't see how it possibly could. Equally, I can't see why
> the move from v2015.01 to HEAD would affect the issue if it was caused
> by the timer implementation.
> 
> My suspicion is that there's something else entirely going on.

It doesn't , there's something else going on.

Best regards,
Marek Vasut