[U-Boot] [U-Boot, 2/2] u-boot breaks for the Overo boards since the following commit: a6b541b09022acb6f7c2754100ae26bd44eed1d9

Tom Rini trini at konsulko.com
Sun May 10 16:09:34 CEST 2015


On Tue, Apr 28, 2015 at 04:55:30PM -0700, Arun Bharadwaj wrote:

> This is because the gd pointer is not set early enough anymore,
> such that the i2c_set_bus_num in get_board_revision can safely
> execute. This results in a console hang at SPL and the boot does
> not proceed.
> 
> This piece of code is anyway necessary only for really old Overo
> boards with revision numbers <= 2410 and not required for the newer
> boards. For these older boards, u-boot v2014.10 still works fine.
> 
> Signed-off-by: Arun Bharadwaj <arun at gumstix.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150510/6a7f15ab/attachment.sig>


More information about the U-Boot mailing list