[U-Boot] [U-Boot PATCH v2 12/17] spi: zynq_spi: Add fdt support in driver

[Jagan Teki]

Now zynq spi driver platform data is controlled by devicetree,
enable the status by saying "okay" on respective board dts to use
the devicetree generated platdata.

Ex:
&spi1 {
	status = "okay";
};

Signed-off-by: Jagan Teki <jteki at openedev.com>
Acked-by: Simon Glass <sjg at chromium.org>
Cc: Michal Simek <michal.simek at xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
---
 arch/arm/dts/zynq-7000.dtsi               |  2 ++
 doc/device-tree-bindings/spi/spi-zynq.txt |  2 ++
 drivers/spi/zynq_spi.c                    | 23 +++++++++++++----------
 3 files changed, 17 insertions(+), 10 deletions(-)

diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index f66f8dc..9207159 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -117,6 +117,7 @@
 			interrupts = <0 26 4>;
 			clocks = <&clkc 25>, <&clkc 34>;
 			clock-names = "ref_clk", "pclk";
+			spi-max-frequency = <166666700>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -129,6 +130,7 @@
 			interrupts = <0 49 4>;
 			clocks = <&clkc 26>, <&clkc 35>;
 			clock-names = "ref_clk", "pclk";
+			spi-max-frequency = <166666700>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
diff --git a/doc/device-tree-bindings/spi/spi-zynq.txt b/doc/device-tree-bindings/spi/spi-zynq.txt
index a7c2757..f397a36 100644
--- a/doc/device-tree-bindings/spi/spi-zynq.txt
+++ b/doc/device-tree-bindings/spi/spi-zynq.txt
@@ -11,6 +11,7 @@ Required properties:
 - clocks		: Clock phandles (see clock bindings for details).
 - clock-names		: List of input clock names - "ref_clk", "pclk"
 			  (See clock bindings for details).
+- spi-max-frequency	: Maximum SPI clocking speed of device in Hz
 
 Example:
 
@@ -22,6 +23,7 @@ Example:
 		interrupts = <0 26 4>;
 		clocks = <&clkc 25>, <&clkc 34>;
 		clock-names = "ref_clk", "pclk";
+		spi-max-frequency = <166666700>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	} ;
diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c
index 6cc6db9..4691ad5 100644
--- a/drivers/spi/zynq_spi.c
+++ b/drivers/spi/zynq_spi.c
@@ -13,9 +13,12 @@
 #include <errno.h>
 #include <malloc.h>
 #include <spi.h>
+#include <fdtdec.h>
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* zynq spi register bit masks ZYNQ_SPI_<REG>_<BIT>_MASK */
 #define ZYNQ_SPI_CR_MSA_MASK		(1 << 15)	/* Manual start enb */
 #define ZYNQ_SPI_CR_MCS_MASK		(1 << 14)	/* Manual chip select */
@@ -64,22 +67,22 @@ struct zynq_spi_priv {
 	u32 freq;		/* required frequency */
 };
 
-static inline struct zynq_spi_regs *get_zynq_spi_regs(struct udevice *bus)
-{
-	if (bus->seq)
-		return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR1;
-	else
-		return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR0;
-}
-
 static int zynq_spi_ofdata_to_platdata(struct udevice *bus)
 {
 	struct zynq_spi_platdata *plat = bus->platdata;
+	const void *blob = gd->fdt_blob;
+	int node = bus->of_offset;
+
+	plat->regs = (struct zynq_spi_regs *)fdtdec_get_addr(blob, node, "reg");
 
-	plat->regs = get_zynq_spi_regs(bus);
-	plat->frequency = 166666700;
+	/* FIXME: Use 250MHz as a suitable default */
+	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
+					250000000);
 	plat->speed_hz = plat->frequency / 2;
 
+	debug("zynq_spi_ofdata_to_platdata: regs=%p max-frequency=%d\n",
+	      plat->regs, plat->frequency);
+
 	return 0;
 }
 
-- 
1.9.1