[U-Boot] [PATCH v6 0/4] spi, sf: add mtdparts feature to spi and sf commands

Heiko Schocher hs at denx.de
Mon May 11 07:49:09 CEST 2015


Hello Jagan,

Am 27.04.2015 07:42, schrieb Heiko Schocher:
> This patchserie add the popssibility to define mtd partitions on
> spi nor flash, and use this settings with the sf commands.
>
> steps:
>
> - add MTD layer driver for spi, original patch from:
> http://git.denx.de/?p=u-boot/u-boot-mips.git;a=commitdiff;h=bb246819cdc90493dd7089eaa51b9e639765cced
>
>    and addapted it to current mainline.
>
> - move common functions to get offset and size from
>    cmdline nand command to extract offset and size from
>    a mtd partition to common place "drivers/mtd/mtd_uboot.c"
>    maybe another place is better?
>
> - add to the sf command the possibility to use offset and size from
>    the settings in mtdparts
>
> With this patchset, the sf command looks now:
>
> => sf
> sf - SPI flash sub-system
>
> Usage:
> sf probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus
>                                    and chip select
> sf read addr offset|partition len       - read `len' bytes starting at
>                                            `offset' to memory at `addr'
> sf write addr offset|partition len      - write `len' bytes from memory
>                                            at `addr' to flash at `offset'
> sf erase offset|partition [+]len        - erase `len' bytes from `offset'
>                                            `+len' round up `len' to block size
> sf update addr offset|partition len     - erase and write `len' bytes from memory
>                                            at `addr' to flash at `offset'
> =>
> for example "env" is defined in mtdparts:
>
> => sf read 13000000 env
> device 0 offset 0xd0000, size 0x10000
> SF: 65536 bytes @ 0xd0000 Read: OK
> =>
>
> There are the followings checkpatch warnings:
>
> CHECK: Alignment should match open parenthesis
> +               if (arg_off(argv[2], &idx, &addr, &maxsize, &maxsize,
> +                   MTD_DEV_TYPE_NAND, nand_info[idx].size)) {
>
> CHECK: Alignment should match open parenthesis
> +                       if (arg_off(argv[3], &dev, &off, &size, &maxsize,
> +                           MTD_DEV_TYPE_NAND, nand_info[dev].size))
>
> CHECK: Alignment should match open parenthesis
> +                       if (arg_off_size(argc - 3, argv + 3, &dev, &off, &size,
> +                           &maxsize, MTD_DEV_TYPE_NAND,
>
> total: 0 errors, 0 warnings, 3 checks, 361 lines checked
>
> NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE NETWORKING_BLOCK_COMMENT_STYLE USLEEP_RANGE
>
> 20140714_ml_mtdparts/0002-mtd-nand-move-common-functions-from-cmd_nand.c-to-co.patch has style problems, please review.
>
> I see not, why this warning pops up ...
>
> resend rebased version of this series, as v3 is pending since
> September 2014...
>
> Changes in v6:
> - add comments from Jagan Teki:
>    new patch in this patchserie, extract this piece
>    of code into a new patch.
>
> Changes in v2:
> - add comment from Daniel Schwierzeck:
>    fix compile error from original patch with
>    "static inline" rather than "static __maybe_unused"
> Changes in v3:
> - rebase with d6c1ffc7d23f4fe4ae8c91101861055b8e1501b6
> - add comments from scott wood:
>    - align MTD_DEV_TYPE_NAND correct
>    - remove unnecessary inline
>    - rework "jffs2 header" problem later
> Changes in v4:
> - rebased against 385a08a60f042061b004642d6b9bb6cfb794ad5a
> Changes in v5:
> - add comment from Scott Wood:
>    keep the continuation line aligned with the arguments
>
> Changes in v6:
> - add comments from Jagan Teki:
>    move code, which checks if flash pointer is used
>    into a new patch.
>    - use #ifdef in Code
>    - call mtd register before the spi_release_bus
> - add Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>
> - fix Tom Rinis mail addr
> - add comment from Scott Wood:
>    - fix indentation level
>    - add mtd_ prefix
>    - move str2off and str2long into common place, as they are no
>      mtd specific functions and change return value from int to bool
> - add comment from Jagan Teki:
>    - append help text
>    - add Reviewed-by from Jagannadha Sutradharudu Teki
>
> Daniel Schwierzeck (1):
>    mtd, spi: add MTD layer driver
>
> Heiko Schocher (3):
>    mtd, nand: move common functions from cmd_nand.c to common place
>    spi, sf: use offset and size in sf cmd from mtdpartition
>    mtd, spi: check if flash pointer is used
>
>   README                        |   3 +
>   common/cmd_nand.c             | 148 +++++++++---------------------------------
>   common/cmd_onenand.c          |  19 ++----
>   common/cmd_sf.c               |  61 +++++++++--------
>   common/cmd_test.c             |  12 +---
>   drivers/mtd/Makefile          |   4 +-
>   drivers/mtd/mtd_uboot.c       |  99 ++++++++++++++++++++++++++++
>   drivers/mtd/spi/Makefile      |   1 +
>   drivers/mtd/spi/sf_internal.h |   5 ++
>   drivers/mtd/spi/sf_mtd.c      | 104 +++++++++++++++++++++++++++++
>   drivers/mtd/spi/sf_probe.c    |  10 +--
>   include/linux/mtd/mtd.h       |   5 ++
>   include/vsprintf.h            |   2 +
>   lib/vsprintf.c                |  16 +++++
>   14 files changed, 317 insertions(+), 172 deletions(-)
>   create mode 100644 drivers/mtd/mtd_uboot.c
>   create mode 100644 drivers/mtd/spi/sf_mtd.c

I got no more comment for this v6. Are there any more issues?
If not I vote for apllying it soon, so we have some tests before
the next release... thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the U-Boot mailing list