[U-Boot] [U-Boot, 6/6] overo: Override RAM setup for rev. 0 boards

[Ash Charles]

Ah---good catch.  Thanks for the explanation Tom.
--Ash

On Sun, May 10, 2015 at 7:07 AM, Tom Rini <trini at konsulko.com> wrote:
> On Tue, Apr 28, 2015 at 04:17:55PM -0700, Ash Charles wrote:
>
>> From: Arun Bharadwaj <arun at gumstix.com>
>>
>> Overo boards with board revision 0 use a 256MB RAM + 256MB NAND chip.
>> For an unknown reason, these boards fail to boot a 3.17.8 kernel based
>> on the RAM size configuration in u-boot.  As a workaround, fake out the
>> RAM setting in u-boot (discussion [1]).
>>
>> [1] http://gumstix.8.x6.nabble.com/running-built-images-tt4969794.html
>>
>> Signed-off-by: Arun Bharadwaj <arun at gumstix.com>
>> Signed-off-by: Ash Charles <ashcharles at gmail.com>
>
> Just for the record (since I just dug into it), this change was included
> in the v2 of the series that created board/overo/spl.c and thus not
> needed.
>
> --
> Tom